include/configs/m53evk.h

   1 /*
   2  * DENX M53 configuration
   3  * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __M53EVK_CONFIG_H__
   9 #define __M53EVK_CONFIG_H__
  10
  11 #define CONFIG_MX53
  12 #define CONFIG_SYS_GENERIC_BOARD
  13 #define CONFIG_MXC_GPIO
  14
  15 #include <asm/arch/imx-regs.h>
  16
  17 #define CONFIG_DISPLAY_CPUINFO
  18 #define CONFIG_BOARD_EARLY_INIT_F
  19 #define CONFIG_REVISION_TAG
  20 #define CONFIG_SYS_NO_FLASH
  21
  22 #define CONFIG_FIT
  23
  24 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  25
  26 /*
  27  * U-Boot Commands
  28  */
  29 #include <config_cmd_default.h>
  30 #define CONFIG_DISPLAY_BOARDINFO
  31 #define CONFIG_DOS_PARTITION
  32 #define CONFIG_FAT_WRITE
  33
  34 #define CONFIG_CMD_ASKENV
  35 #define CONFIG_CMD_BMP
  36 #define CONFIG_CMD_DATE
  37 #define CONFIG_CMD_DHCP
  38 #define CONFIG_CMD_EXT4
  39 #define CONFIG_CMD_EXT4_WRITE
  40 #define CONFIG_CMD_FAT
  41 #define CONFIG_CMD_FS_GENERIC
  42 #define CONFIG_CMD_GREPENV
  43 #define CONFIG_CMD_I2C
  44 #define CONFIG_CMD_MII
  45 #define CONFIG_CMD_MMC
  46 #define CONFIG_CMD_NAND
  47 #define CONFIG_CMD_NET
  48 #define CONFIG_CMD_PING
  49 #define CONFIG_CMD_SATA
  50 #define CONFIG_CMD_USB
  51 #define CONFIG_VIDEO
  52
  53
  54 /*
  55  * Memory configurations
  56  */
  57 #define CONFIG_NR_DRAM_BANKS            2
  58 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
  59 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
  60 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
  61 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
  62 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
  63 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  64 #define CONFIG_SYS_MEMTEST_START        0x70000000
  65 #define CONFIG_SYS_MEMTEST_END          0x8ff00000
  66
  67 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
  68 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
  69 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
  70
  71 #define CONFIG_SYS_INIT_SP_OFFSET \
  72         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  73 #define CONFIG_SYS_INIT_SP_ADDR \
  74         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  75
  76 #define CONFIG_SYS_TEXT_BASE            0x71000000
  77
  78 /*
  79  * U-Boot general configurations
  80  */
  81 #define CONFIG_SYS_LONGHELP
  82 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
  83 #define CONFIG_SYS_PBSIZE       \
  84         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  85                                                 /* Print buffer size */
  86 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
  87 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  88                                                 /* Boot argument buffer size */
  89 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
  90 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
  91 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
  92 #define CONFIG_SYS_HUSH_PARSER
  93
  94 /*
  95  * Serial Driver
  96  */
  97 #define CONFIG_MXC_UART
  98 #define CONFIG_MXC_UART_BASE            UART2_BASE
  99 #define CONFIG_CONS_INDEX               1
 100 #define CONFIG_BAUDRATE                 115200
 101
 102 /*
 103  * MMC Driver
 104  */
 105 #ifdef CONFIG_CMD_MMC
 106 #define CONFIG_MMC
 107 #define CONFIG_GENERIC_MMC
 108 #define CONFIG_FSL_ESDHC
 109 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 110 #define CONFIG_SYS_FSL_ESDHC_NUM        1
 111 #endif
 112
 113 /*
 114  * NAND
 115  */
 116 #define CONFIG_ENV_SIZE                 (16 * 1024)
 117 #ifdef CONFIG_CMD_NAND
 118 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 119 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR_AXI
 120 #define CONFIG_NAND_MXC
 121 #define CONFIG_MXC_NAND_REGS_BASE       NFC_BASE_ADDR_AXI
 122 #define CONFIG_MXC_NAND_IP_REGS_BASE    NFC_BASE_ADDR
 123 #define CONFIG_SYS_NAND_LARGEPAGE
 124 #define CONFIG_MXC_NAND_HWECC
 125 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 126
 127 /* Environment is in NAND */
 128 #define CONFIG_ENV_IS_IN_NAND
 129 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 130 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)
 131 #define CONFIG_ENV_RANGE                (4 * CONFIG_ENV_SECT_SIZE)
 132 #define CONFIG_ENV_OFFSET               (8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
 133 #define CONFIG_ENV_OFFSET_REDUND        \
 134                 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 135
 136 #define CONFIG_CMD_UBI
 137 #define CONFIG_CMD_UBIFS
 138 #define CONFIG_CMD_MTDPARTS
 139 #define CONFIG_RBTREE
 140 #define CONFIG_LZO
 141 #define CONFIG_MTD_DEVICE
 142 #define CONFIG_MTD_PARTITIONS
 143 #define MTDIDS_DEFAULT                  "nand0=mxc_nand"
 144 #define MTDPARTS_DEFAULT                        \
 145         "mtdparts=mxc_nand:"                    \
 146                 "1024k(u-boot),"                \
 147                 "512k(env1),"                   \
 148                 "512k(env2),"                   \
 149                 "14m(boot),"                    \
 150                 "240m(data),"                   \
 151                 "-@2048k(UBI)"
 152 #else
 153 #define CONFIG_ENV_IS_NOWHERE
 154 #endif
 155
 156 /*
 157  * Ethernet on SOC (FEC)
 158  */
 159 #ifdef CONFIG_CMD_NET
 160 #define CONFIG_FEC_MXC
 161 #define IMX_FEC_BASE                    FEC_BASE_ADDR
 162 #define CONFIG_FEC_MXC_PHYADDR          0x0
 163 #define CONFIG_MII
 164 #define CONFIG_DISCOVER_PHY
 165 #define CONFIG_FEC_XCV_TYPE             RMII
 166 #define CONFIG_PHYLIB
 167 #define CONFIG_PHY_MICREL
 168 #define CONFIG_ETHPRIME                 "FEC0"
 169 #endif
 170
 171 /*
 172  * I2C
 173  */
 174 #ifdef CONFIG_CMD_I2C
 175 #define CONFIG_SYS_I2C
 176 #define CONFIG_SYS_I2C_MXC
 177 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 178 #define CONFIG_SYS_RTC_BUS_NUM          1 /* I2C2 */
 179 #endif
 180
 181 /*
 182  * RTC
 183  */
 184 #ifdef CONFIG_CMD_DATE
 185 #define CONFIG_RTC_M41T62
 186 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 187 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
 188 #endif
 189
 190 /*
 191  * USB
 192  */
 193 #ifdef CONFIG_CMD_USB
 194 #define CONFIG_USB_EHCI
 195 #define CONFIG_USB_EHCI_MX5
 196 #define CONFIG_USB_STORAGE
 197 #define CONFIG_USB_HOST_ETHER
 198 #define CONFIG_USB_ETHER_ASIX
 199 #define CONFIG_USB_ETHER_MCS7830
 200 #define CONFIG_USB_ETHER_SMSC95XX
 201 #define CONFIG_MXC_USB_PORT             1
 202 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 203 #define CONFIG_MXC_USB_FLAGS            0
 204 #endif
 205
 206 /*
 207  * SATA
 208  */
 209 #ifdef CONFIG_CMD_SATA
 210 #define CONFIG_DWC_AHSATA
 211 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 212 #define CONFIG_DWC_AHSATA_PORT_ID       0
 213 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
 214 #define CONFIG_LBA48
 215 #define CONFIG_LIBATA
 216 #endif
 217
 218 /*
 219  * LCD
 220  */
 221 #ifdef CONFIG_VIDEO
 222 #define CONFIG_VIDEO_IPUV3
 223 #define CONFIG_CFB_CONSOLE
 224 #define CONFIG_VGA_AS_SINGLE_DEVICE
 225 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 226 #define CONFIG_VIDEO_BMP_RLE8
 227 #define CONFIG_VIDEO_BMP_GZIP
 228 #define CONFIG_SPLASH_SCREEN
 229 #define CONFIG_SPLASHIMAGE_GUARD
 230 #define CONFIG_SPLASH_SCREEN_ALIGN
 231 #define CONFIG_BMP_16BPP
 232 #define CONFIG_VIDEO_LOGO
 233 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (2 << 20)
 234 #define CONFIG_IPUV3_CLK                200000000
 235 #endif
 236
 237 /*
 238  * Boot Linux
 239  */
 240 #define CONFIG_CMDLINE_TAG
 241 #define CONFIG_INITRD_TAG
 242 #define CONFIG_REVISION_TAG
 243 #define CONFIG_SETUP_MEMORY_TAGS
 244 #define CONFIG_BOOTDELAY        3
 245 #define CONFIG_BOOTFILE         "fitImage"
 246 #define CONFIG_BOOTARGS         "console=ttymxc1,115200"
 247 #define CONFIG_LOADADDR         0x70800000
 248 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
 249 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 250 #define CONFIG_OF_LIBFDT
 251
 252 /*
 253  * NAND SPL
 254  */
 255 #define CONFIG_SPL_FRAMEWORK
 256 #define CONFIG_SPL_TARGET               "u-boot-with-nand-spl.imx"
 257 #define CONFIG_SPL_BOARD_INIT
 258 #define CONFIG_SPL_TEXT_BASE            0x70008000
 259 #define CONFIG_SPL_PAD_TO               0x8000
 260 #define CONFIG_SPL_STACK                0x70004000
 261 #define CONFIG_SPL_GPIO_SUPPORT
 262 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 263 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 264 #define CONFIG_SPL_NAND_SUPPORT
 265 #define CONFIG_SPL_SERIAL_SUPPORT
 266
 267 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
 268 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 269 #define CONFIG_SYS_NAND_OOBSIZE         64
 270 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 271 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
 272 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 273
 274 /*
 275  * Extra Environments
 276  */
 277 #define CONFIG_PREBOOT          "run try_bootscript"
 278 #define CONFIG_HOSTNAME         m53evk
 279
 280 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 281         "consdev=ttymxc1\0"                                             \
 282         "baudrate=115200\0"                                             \
 283         "bootscript=boot.scr\0"                                         \
 284         "bootdev=/dev/mmcblk0p1\0"                                      \
 285         "rootdev=/dev/mmcblk0p2\0"                                      \
 286         "netdev=eth0\0"                                                 \
 287         "rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-qte-sdk\0"             \
 288         "kernel_addr_r=0x72000000\0"                                    \
 289         "addcons="                                                      \
 290                 "setenv bootargs ${bootargs} "                          \
 291                 "console=${consdev},${baudrate}\0"                      \
 292         "addip="                                                        \
 293                 "setenv bootargs ${bootargs} "                          \
 294                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 295                         "${netmask}:${hostname}:${netdev}:off\0"        \
 296         "addmisc="                                                      \
 297                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 298         "adddfltmtd="                                                   \
 299                 "if test \"x${mtdparts}\" == \"x\" ; then "             \
 300                         "mtdparts default ; "                           \
 301                 "fi\0"                                                  \
 302         "addmtd="                                                       \
 303                 "run adddfltmtd ; "                                     \
 304                 "setenv bootargs ${bootargs} ${mtdparts}\0"             \
 305         "addargs=run addcons addmtd addmisc\0"                          \
 306         "mmcload="                                                      \
 307                 "mmc rescan ; "                                         \
 308                 "load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"           \
 309         "ubiload="                                                      \
 310                 "ubi part UBI ; ubifsmount ubi0:rootfs ; "              \
 311                 "ubifsload ${kernel_addr_r} /boot/${bootfile}\0"        \
 312         "netload="                                                      \
 313                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 314         "miscargs=nohlt panic=1\0"                                      \
 315         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 316         "ubiargs="                                                      \
 317                 "setenv bootargs ubi.mtd=5 "                            \
 318                 "root=ubi0:rootfs rootfstype=ubifs\0"                   \
 319         "nfsargs="                                                      \
 320                 "setenv bootargs root=/dev/nfs rw "                     \
 321                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 322         "mmc_mmc="                                                      \
 323                 "run mmcload mmcargs addargs ; "                        \
 324                 "bootm ${kernel_addr_r}\0"                              \
 325         "mmc_ubi="                                                      \
 326                 "run mmcload ubiargs addargs ; "                        \
 327                 "bootm ${kernel_addr_r}\0"                              \
 328         "mmc_nfs="                                                      \
 329                 "run mmcload nfsargs addip addargs ; "                  \
 330                 "bootm ${kernel_addr_r}\0"                              \
 331         "ubi_mmc="                                                      \
 332                 "run ubiload mmcargs addargs ; "                        \
 333                 "bootm ${kernel_addr_r}\0"                              \
 334         "ubi_ubi="                                                      \
 335                 "run ubiload ubiargs addargs ; "                        \
 336                 "bootm ${kernel_addr_r}\0"                              \
 337         "ubi_nfs="                                                      \
 338                 "run ubiload nfsargs addip addargs ; "                  \
 339                 "bootm ${kernel_addr_r}\0"                              \
 340         "net_mmc="                                                      \
 341                 "run netload mmcargs addargs ; "                        \
 342                 "bootm ${kernel_addr_r}\0"                              \
 343         "net_ubi="                                                      \
 344                 "run netload ubiargs addargs ; "                        \
 345                 "bootm ${kernel_addr_r}\0"                              \
 346         "net_nfs="                                                      \
 347                 "run netload nfsargs addip addargs ; "                  \
 348                 "bootm ${kernel_addr_r}\0"                              \
 349         "try_bootscript="                                               \
 350                 "mmc rescan;"                                           \
 351                 "if test -e mmc 0:1 ${bootscript} ; then "              \
 352                 "if load mmc 0:1 ${kernel_addr_r} ${bootscript};"       \
 353                 "then ; "                                               \
 354                         "echo Running bootscript... ; "                 \
 355                         "source ${kernel_addr_r} ; "                    \
 356                 "fi ; "                                                 \
 357                 "fi\0"
 358
 359 #endif  /* __M53EVK_CONFIG_H__ */