include/configs/ma5d4evk.h

   1 /*
   2  * DENX MA5D4 configuration
   3  * Copyright (C) 2015 Marek Vasut <marex@denx.de>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __MA5D4EVK_CONFIG_H__
   9 #define __MA5D4EVK_CONFIG_H__
  10
  11 #define CONFIG_SYS_NO_FLASH
  12
  13 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  14
  15 #include "at91-sama5_common.h"
  16 #undef CONFIG_BOOTARGS
  17 #define CONFIG_SYS_USE_SERIALFLASH      1
  18
  19 /*
  20  * U-Boot Commands
  21  */
  22 #define CONFIG_DOS_PARTITION
  23 #define CONFIG_FAT_WRITE
  24 /*#define CONFIG_LCD*/
  25
  26 /*
  27  * Memory configurations
  28  */
  29 #define CONFIG_NR_DRAM_BANKS            1
  30 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
  31 #define CONFIG_SYS_SDRAM_SIZE           0x10000000
  32
  33 #ifdef CONFIG_SPL_BUILD
  34 #define CONFIG_SYS_INIT_SP_ADDR         0x210000
  35 #else
  36 #define CONFIG_SYS_INIT_SP_ADDR \
  37         (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
  38 #endif
  39
  40 /*
  41  * Environment
  42  */
  43 #define CONFIG_ENV_IS_IN_SPI_FLASH
  44 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
  45 #define CONFIG_ENV_OFFSET               0x8000
  46 #define CONFIG_ENV_SIZE                 0x4000
  47 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
  48 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
  49 #define CONFIG_ENV_SECT_SIZE            0x1000
  50
  51 /*
  52  * U-Boot general configurations
  53  */
  54 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
  55
  56 /*
  57  * Serial Driver
  58  */
  59 #define CONFIG_ATMEL_USART
  60 #define CONFIG_USART_BASE               ATMEL_BASE_USART0
  61 #define CONFIG_USART_ID                 ATMEL_ID_USART0
  62
  63 /*
  64  * Ethernet
  65  */
  66 #ifdef CONFIG_CMD_NET
  67 #define CONFIG_MACB
  68 #define CONFIG_RMII
  69 #define CONFIG_NET_RETRY_COUNT          20
  70 #define CONFIG_MACB_SEARCH_PHY
  71 #define CONFIG_ARP_TIMEOUT              200UL
  72 #define CONFIG_IP_DEFRAG
  73 #endif
  74
  75 /*
  76  * LCD
  77  */
  78 #ifdef CONFIG_LCD
  79 #define CONFIG_CMD_BMP
  80 #define CONFIG_BMP_16BPP
  81 #define CONFIG_BMP_24BPP
  82 #define CONFIG_BMP_32BPP
  83 #define LCD_BPP                         LCD_COLOR16
  84 #define LCD_OUTPUT_BPP                  24
  85 #define CONFIG_ATMEL_HLCD
  86 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  87 #endif
  88
  89 /*
  90  * SD/MMC
  91  */
  92 #ifdef CONFIG_CMD_MMC
  93 #define CONFIG_MMC
  94 #define CONFIG_GENERIC_MMC
  95 #define CONFIG_GENERIC_ATMEL_MCI
  96 #endif
  97
  98 /*
  99  * SPI NOR (boot memory)
 100  */
 101 #ifdef CONFIG_CMD_SF
 102 #define CONFIG_ATMEL_SPI
 103 #define CONFIG_ATMEL_SPI0
 104 #define CONFIG_SPI_FLASH_ATMEL
 105 #define CONFIG_SF_DEFAULT_BUS           0
 106 #define CONFIG_SF_DEFAULT_CS            0
 107 #define CONFIG_SF_DEFAULT_SPEED         30000000
 108 #endif
 109
 110 /*
 111  * USB
 112  */
 113 #ifdef CONFIG_CMD_USB
 114 #define CONFIG_USB_EHCI
 115 #define CONFIG_USB_EHCI_ATMEL
 116 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      3
 117
 118 /* USB device */
 119 #define CONFIG_USB_ETHER
 120 #define CONFIG_USB_ETH_RNDIS
 121 #define CONFIG_USBNET_MANUFACTURER      "DENX"
 122 #endif
 123
 124 /*
 125  * Boot Linux
 126  */
 127 #define CONFIG_CMDLINE_TAG
 128 #define CONFIG_INITRD_TAG
 129 #define CONFIG_SETUP_MEMORY_TAGS
 130 #define CONFIG_BOOTFILE         "fitImage"
 131 #define CONFIG_BOOTARGS         "console=ttyS3,115200"
 132 #define CONFIG_LOADADDR         0x20800000
 133 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
 134 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 135
 136 /*
 137  * Extra Environments
 138  */
 139 #define CONFIG_PREBOOT          "run try_bootscript"
 140 #define CONFIG_HOSTNAME         ma5d4evk
 141
 142 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 143         "consdev=ttyS3\0"                                               \
 144         "baudrate=115200\0"                                             \
 145         "bootscript=boot.scr\0"                                         \
 146         "bootdev=/dev/mmcblk1p1\0"                                      \
 147         "bootpart=1:1\0"                                                \
 148         "rootdev=/dev/mmcblk1p2\0"                                      \
 149         "netdev=eth0\0"                                                 \
 150         "kernel_addr_r=0x22000000\0"                                    \
 151         "update_spi_firmware_spl_addr=0x21000000\0"                     \
 152         "update_spi_firmware_spl_filename=boot.bin\0"                   \
 153         "update_spi_firmware_addr=0x22000000\0"                         \
 154         "update_spi_firmware_filename=u-boot.img\0"                     \
 155         "update_spi_firmware="  /* Update the SPI flash firmware */     \
 156                 "if sf probe ; then "                                   \
 157                 "if tftp ${update_spi_firmware_spl_addr} "              \
 158                         "${update_spi_firmware_spl_filename} ; then "   \
 159                 "setenv update_spi_firmware_spl_filesize ${filesize} ; "\
 160                 "if tftp ${update_spi_firmware_addr} "                  \
 161                         "${update_spi_firmware_filename} ; then "       \
 162                 "setenv update_spi_firmware_filesize ${filesize} ; "    \
 163                 "sf update ${update_spi_firmware_spl_addr} 0x0 "        \
 164                         "${update_spi_firmware_spl_filesize} ; "        \
 165                 "sf update ${update_spi_firmware_addr} 0x10000 "        \
 166                         "${update_spi_firmware_filesize} ; "            \
 167                 "fi ; "                                                 \
 168                 "fi ; "                                                 \
 169                 "fi\0"                                                  \
 170         "addcons="                                                      \
 171                 "setenv bootargs ${bootargs} "                          \
 172                 "console=${consdev},${baudrate}\0"                      \
 173         "addip="                                                        \
 174                 "setenv bootargs ${bootargs} "                          \
 175                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 176                         "${netmask}:${hostname}:${netdev}:off\0"        \
 177         "addmisc="                                                      \
 178                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 179         "addargs=run addcons addmisc\0"                                 \
 180         "mmcload="                                                      \
 181                 "mmc rescan ; "                                         \
 182                 "load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0"   \
 183         "netload="                                                      \
 184                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 185         "miscargs=nohlt panic=1\0"                                      \
 186         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 187         "nfsargs="                                                      \
 188                 "setenv bootargs root=/dev/nfs rw "                     \
 189                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 190         "mmc_mmc="                                                      \
 191                 "run mmcload mmcargs addargs ; "                        \
 192                 "bootm ${kernel_addr_r}\0"                              \
 193         "mmc_nfs="                                                      \
 194                 "run mmcload nfsargs addip addargs ; "                  \
 195                 "bootm ${kernel_addr_r}\0"                              \
 196         "net_mmc="                                                      \
 197                 "run netload mmcargs addargs ; "                        \
 198                 "bootm ${kernel_addr_r}\0"                              \
 199         "net_nfs="                                                      \
 200                 "run netload nfsargs addip addargs ; "                  \
 201                 "bootm ${kernel_addr_r}\0"                              \
 202         "try_bootscript="                                               \
 203                 "mmc rescan;"                                           \
 204                 "if test -e mmc ${bootpart} ${bootscript} ; then "      \
 205                 "if load mmc ${bootpart} ${kernel_addr_r} ${bootscript};"\
 206                 "then ; "                                               \
 207                         "echo Running bootscript... ; "                 \
 208                         "source ${kernel_addr_r} ; "                    \
 209                 "fi ; "                                                 \
 210                 "fi\0"
 211 /* SPL */
 212 #define CONFIG_SPL_FRAMEWORK
 213 #define CONFIG_SPL_TEXT_BASE            0x200000
 214 #define CONFIG_SPL_MAX_SIZE             0x10000
 215 #define CONFIG_SPL_BSS_START_ADDR       0x20000000
 216 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 217 #define CONFIG_SYS_SPL_MALLOC_START     0x20080000
 218 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
 219
 220 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 221 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 222 #define CONFIG_SPL_GPIO_SUPPORT
 223 #define CONFIG_SPL_SERIAL_SUPPORT
 224
 225 #define CONFIG_SPL_BOARD_INIT
 226 #define CONFIG_SYS_MONITOR_LEN          (512 << 10)
 227
 228 #define CONFIG_SPL_SPI_SUPPORT
 229 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 230 #define CONFIG_SPL_SPI_LOAD
 231 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x10000
 232
 233 #endif  /* __MA5D4EVK_CONFIG_H__ */