include/configs/ma5d4evk.h

   1 /*
   2  * DENX MA5D4 configuration
   3  * Copyright (C) 2015 Marek Vasut <marex@denx.de>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __MA5D4EVK_CONFIG_H__
   9 #define __MA5D4EVK_CONFIG_H__
  10
  11 #define CONFIG_SYS_NO_FLASH
  12
  13 #define CONFIG_FIT
  14
  15 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  16
  17 #include "at91-sama5_common.h"
  18 #undef CONFIG_BOOTARGS
  19 #define CONFIG_SYS_USE_SERIALFLASH      1
  20
  21 /*
  22  * U-Boot Commands
  23  */
  24 #define CONFIG_DOS_PARTITION
  25 #define CONFIG_FAT_WRITE
  26 /*#define CONFIG_LCD*/
  27
  28 #define CONFIG_CMD_ASKENV
  29 #define CONFIG_CMD_CACHE
  30 #define CONFIG_CMD_DHCP
  31 #define CONFIG_CMD_EXT4
  32 #define CONFIG_CMD_EXT4_WRITE
  33 #define CONFIG_CMD_FAT
  34 #define CONFIG_CMD_FS_GENERIC
  35 #define CONFIG_CMD_GREPENV
  36 #define CONFIG_CMD_MII
  37 #define CONFIG_CMD_MMC
  38 #define CONFIG_CMD_PING
  39 #define CONFIG_CMD_SF
  40 #define CONFIG_CMD_USB
  41
  42 /*
  43  * Memory configurations
  44  */
  45 #define CONFIG_NR_DRAM_BANKS            1
  46 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
  47 #define CONFIG_SYS_SDRAM_SIZE           0x10000000
  48
  49 #ifdef CONFIG_SPL_BUILD
  50 #define CONFIG_SYS_INIT_SP_ADDR         0x210000
  51 #else
  52 #define CONFIG_SYS_INIT_SP_ADDR \
  53         (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
  54 #endif
  55
  56 /*
  57  * Environment
  58  */
  59 #define CONFIG_ENV_IS_IN_SPI_FLASH
  60 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
  61 #define CONFIG_ENV_OFFSET               0x8000
  62 #define CONFIG_ENV_SIZE                 0x4000
  63 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
  64 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
  65 #define CONFIG_ENV_SECT_SIZE            0x1000
  66
  67 /*
  68  * U-Boot general configurations
  69  */
  70 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
  71
  72 /*
  73  * Serial Driver
  74  */
  75 #define CONFIG_ATMEL_USART
  76 #define CONFIG_USART_BASE               ATMEL_BASE_USART0
  77 #define CONFIG_USART_ID                 ATMEL_ID_USART0
  78
  79 /*
  80  * Ethernet
  81  */
  82 #ifdef CONFIG_CMD_NET
  83 #define CONFIG_MACB
  84 #define CONFIG_RMII
  85 #define CONFIG_NET_RETRY_COUNT          20
  86 #define CONFIG_MACB_SEARCH_PHY
  87 #define CONFIG_ARP_TIMEOUT              200UL
  88 #define CONFIG_IP_DEFRAG
  89 #endif
  90
  91 /*
  92  * LCD
  93  */
  94 #ifdef CONFIG_LCD
  95 #define CONFIG_CMD_BMP
  96 #define CONFIG_BMP_16BPP
  97 #define CONFIG_BMP_24BPP
  98 #define CONFIG_BMP_32BPP
  99 #define LCD_BPP                         LCD_COLOR16
 100 #define LCD_OUTPUT_BPP                  24
 101 #define CONFIG_ATMEL_HLCD
 102 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 103 #endif
 104
 105 /*
 106  * SD/MMC
 107  */
 108 #ifdef CONFIG_CMD_MMC
 109 #define CONFIG_MMC
 110 #define CONFIG_GENERIC_MMC
 111 #define CONFIG_GENERIC_ATMEL_MCI
 112 #endif
 113
 114 /*
 115  * SPI NOR (boot memory)
 116  */
 117 #ifdef CONFIG_CMD_SF
 118 #define CONFIG_ATMEL_SPI
 119 #define CONFIG_ATMEL_SPI0
 120 #define CONFIG_SPI_FLASH_ATMEL
 121 #define CONFIG_SF_DEFAULT_BUS           0
 122 #define CONFIG_SF_DEFAULT_CS            0
 123 #define CONFIG_SF_DEFAULT_SPEED         30000000
 124 #endif
 125
 126 /*
 127  * USB
 128  */
 129 #ifdef CONFIG_CMD_USB
 130 #define CONFIG_USB_EHCI
 131 #define CONFIG_USB_EHCI_ATMEL
 132 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      3
 133 #define CONFIG_USB_STORAGE
 134
 135 /* USB device */
 136 #define CONFIG_USB_GADGET
 137 #define CONFIG_USB_GADGET_DUALSPEED
 138 #define CONFIG_USB_GADGET_ATMEL_USBA
 139 #define CONFIG_USB_ETHER
 140 #define CONFIG_USB_ETH_RNDIS
 141 #define CONFIG_USBNET_MANUFACTURER      "DENX"
 142 #endif
 143
 144 /*
 145  * Boot Linux
 146  */
 147 #define CONFIG_CMDLINE_TAG
 148 #define CONFIG_INITRD_TAG
 149 #define CONFIG_SETUP_MEMORY_TAGS
 150 #define CONFIG_BOOTDELAY        3
 151 #define CONFIG_BOOTFILE         "fitImage"
 152 #define CONFIG_BOOTARGS         "console=ttyS3,115200"
 153 #define CONFIG_LOADADDR         0x20800000
 154 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
 155 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 156 #define CONFIG_OF_LIBFDT
 157
 158 /*
 159  * Extra Environments
 160  */
 161 #define CONFIG_PREBOOT          "run try_bootscript"
 162 #define CONFIG_HOSTNAME         ma5d4evk
 163
 164 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 165         "consdev=ttyS3\0"                                               \
 166         "baudrate=115200\0"                                             \
 167         "bootscript=boot.scr\0"                                         \
 168         "bootdev=/dev/mmcblk1p1\0"                                      \
 169         "bootpart=1:1\0"                                                \
 170         "rootdev=/dev/mmcblk1p2\0"                                      \
 171         "netdev=eth0\0"                                                 \
 172         "kernel_addr_r=0x22000000\0"                                    \
 173         "update_spi_firmware_spl_addr=0x21000000\0"                     \
 174         "update_spi_firmware_spl_filename=boot.bin\0"                   \
 175         "update_spi_firmware_addr=0x22000000\0"                         \
 176         "update_spi_firmware_filename=u-boot.img\0"                     \
 177         "update_spi_firmware="  /* Update the SPI flash firmware */     \
 178                 "if sf probe ; then "                                   \
 179                 "if tftp ${update_spi_firmware_spl_addr} "              \
 180                         "${update_spi_firmware_spl_filename} ; then "   \
 181                 "setenv update_spi_firmware_spl_filesize ${filesize} ; "\
 182                 "if tftp ${update_spi_firmware_addr} "                  \
 183                         "${update_spi_firmware_filename} ; then "       \
 184                 "setenv update_spi_firmware_filesize ${filesize} ; "    \
 185                 "sf update ${update_spi_firmware_spl_addr} 0x0 "        \
 186                         "${update_spi_firmware_spl_filesize} ; "        \
 187                 "sf update ${update_spi_firmware_addr} 0x10000 "        \
 188                         "${update_spi_firmware_filesize} ; "            \
 189                 "fi ; "                                                 \
 190                 "fi ; "                                                 \
 191                 "fi\0"                                                  \
 192         "addcons="                                                      \
 193                 "setenv bootargs ${bootargs} "                          \
 194                 "console=${consdev},${baudrate}\0"                      \
 195         "addip="                                                        \
 196                 "setenv bootargs ${bootargs} "                          \
 197                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 198                         "${netmask}:${hostname}:${netdev}:off\0"        \
 199         "addmisc="                                                      \
 200                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 201         "addargs=run addcons addmisc\0"                                 \
 202         "mmcload="                                                      \
 203                 "mmc rescan ; "                                         \
 204                 "load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0"   \
 205         "netload="                                                      \
 206                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 207         "miscargs=nohlt panic=1\0"                                      \
 208         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 209         "nfsargs="                                                      \
 210                 "setenv bootargs root=/dev/nfs rw "                     \
 211                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 212         "mmc_mmc="                                                      \
 213                 "run mmcload mmcargs addargs ; "                        \
 214                 "bootm ${kernel_addr_r}\0"                              \
 215         "mmc_nfs="                                                      \
 216                 "run mmcload nfsargs addip addargs ; "                  \
 217                 "bootm ${kernel_addr_r}\0"                              \
 218         "net_mmc="                                                      \
 219                 "run netload mmcargs addargs ; "                        \
 220                 "bootm ${kernel_addr_r}\0"                              \
 221         "net_nfs="                                                      \
 222                 "run netload nfsargs addip addargs ; "                  \
 223                 "bootm ${kernel_addr_r}\0"                              \
 224         "try_bootscript="                                               \
 225                 "mmc rescan;"                                           \
 226                 "if test -e mmc ${bootpart} ${bootscript} ; then "      \
 227                 "if load mmc ${bootpart} ${kernel_addr_r} ${bootscript};"\
 228                 "then ; "                                               \
 229                         "echo Running bootscript... ; "                 \
 230                         "source ${kernel_addr_r} ; "                    \
 231                 "fi ; "                                                 \
 232                 "fi\0"
 233 /* SPL */
 234 #define CONFIG_SPL_FRAMEWORK
 235 #define CONFIG_SPL_TEXT_BASE            0x200000
 236 #define CONFIG_SPL_MAX_SIZE             0x10000
 237 #define CONFIG_SPL_BSS_START_ADDR       0x20000000
 238 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 239 #define CONFIG_SYS_SPL_MALLOC_START     0x20080000
 240 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
 241
 242 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 243 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 244 #define CONFIG_SPL_GPIO_SUPPORT
 245 #define CONFIG_SPL_SERIAL_SUPPORT
 246
 247 #define CONFIG_SPL_BOARD_INIT
 248 #define CONFIG_SYS_MONITOR_LEN          (512 << 10)
 249
 250 #define CONFIG_SPL_SPI_SUPPORT
 251 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 252 #define CONFIG_SPL_SPI_LOAD
 253 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x10000
 254
 255 #endif  /* __MA5D4EVK_CONFIG_H__ */