include/configs/ma5d4evk.h

   1 /*
   2  * DENX MA5D4 configuration
   3  * Copyright (C) 2015 Marek Vasut <marex@denx.de>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __MA5D4EVK_CONFIG_H__
   9 #define __MA5D4EVK_CONFIG_H__
  10
  11 #define CONFIG_SYS_NO_FLASH
  12
  13 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  14
  15 #include "at91-sama5_common.h"
  16 #undef CONFIG_BOOTARGS
  17 #define CONFIG_SYS_USE_SERIALFLASH      1
  18
  19 /*
  20  * U-Boot Commands
  21  */
  22 #define CONFIG_DOS_PARTITION
  23 #define CONFIG_FAT_WRITE
  24 /*#define CONFIG_LCD*/
  25
  26 #define CONFIG_CMD_ASKENV
  27 #define CONFIG_CMD_CACHE
  28 #define CONFIG_CMD_EXT4
  29 #define CONFIG_CMD_EXT4_WRITE
  30 #define CONFIG_CMD_FAT
  31 #define CONFIG_CMD_FS_GENERIC
  32 #define CONFIG_CMD_GREPENV
  33 #define CONFIG_CMD_MII
  34 #define CONFIG_CMD_MMC
  35
  36 /*
  37  * Memory configurations
  38  */
  39 #define CONFIG_NR_DRAM_BANKS            1
  40 #define CONFIG_SYS_SDRAM_BASE           ATMEL_BASE_DDRCS
  41 #define CONFIG_SYS_SDRAM_SIZE           0x10000000
  42
  43 #ifdef CONFIG_SPL_BUILD
  44 #define CONFIG_SYS_INIT_SP_ADDR         0x210000
  45 #else
  46 #define CONFIG_SYS_INIT_SP_ADDR \
  47         (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
  48 #endif
  49
  50 /*
  51  * Environment
  52  */
  53 #define CONFIG_ENV_IS_IN_SPI_FLASH
  54 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
  55 #define CONFIG_ENV_OFFSET               0x8000
  56 #define CONFIG_ENV_SIZE                 0x4000
  57 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
  58 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
  59 #define CONFIG_ENV_SECT_SIZE            0x1000
  60
  61 /*
  62  * U-Boot general configurations
  63  */
  64 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
  65
  66 /*
  67  * Serial Driver
  68  */
  69 #define CONFIG_ATMEL_USART
  70 #define CONFIG_USART_BASE               ATMEL_BASE_USART0
  71 #define CONFIG_USART_ID                 ATMEL_ID_USART0
  72
  73 /*
  74  * Ethernet
  75  */
  76 #ifdef CONFIG_CMD_NET
  77 #define CONFIG_MACB
  78 #define CONFIG_RMII
  79 #define CONFIG_NET_RETRY_COUNT          20
  80 #define CONFIG_MACB_SEARCH_PHY
  81 #define CONFIG_ARP_TIMEOUT              200UL
  82 #define CONFIG_IP_DEFRAG
  83 #endif
  84
  85 /*
  86  * LCD
  87  */
  88 #ifdef CONFIG_LCD
  89 #define CONFIG_CMD_BMP
  90 #define CONFIG_BMP_16BPP
  91 #define CONFIG_BMP_24BPP
  92 #define CONFIG_BMP_32BPP
  93 #define LCD_BPP                         LCD_COLOR16
  94 #define LCD_OUTPUT_BPP                  24
  95 #define CONFIG_ATMEL_HLCD
  96 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  97 #endif
  98
  99 /*
 100  * SD/MMC
 101  */
 102 #ifdef CONFIG_CMD_MMC
 103 #define CONFIG_MMC
 104 #define CONFIG_GENERIC_MMC
 105 #define CONFIG_GENERIC_ATMEL_MCI
 106 #endif
 107
 108 /*
 109  * SPI NOR (boot memory)
 110  */
 111 #ifdef CONFIG_CMD_SF
 112 #define CONFIG_ATMEL_SPI
 113 #define CONFIG_ATMEL_SPI0
 114 #define CONFIG_SPI_FLASH_ATMEL
 115 #define CONFIG_SF_DEFAULT_BUS           0
 116 #define CONFIG_SF_DEFAULT_CS            0
 117 #define CONFIG_SF_DEFAULT_SPEED         30000000
 118 #endif
 119
 120 /*
 121  * USB
 122  */
 123 #ifdef CONFIG_CMD_USB
 124 #define CONFIG_USB_EHCI
 125 #define CONFIG_USB_EHCI_ATMEL
 126 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      3
 127 #define CONFIG_USB_STORAGE
 128
 129 /* USB device */
 130 #define CONFIG_USB_ETHER
 131 #define CONFIG_USB_ETH_RNDIS
 132 #define CONFIG_USBNET_MANUFACTURER      "DENX"
 133 #endif
 134
 135 /*
 136  * Boot Linux
 137  */
 138 #define CONFIG_CMDLINE_TAG
 139 #define CONFIG_INITRD_TAG
 140 #define CONFIG_SETUP_MEMORY_TAGS
 141 #define CONFIG_BOOTDELAY        3
 142 #define CONFIG_BOOTFILE         "fitImage"
 143 #define CONFIG_BOOTARGS         "console=ttyS3,115200"
 144 #define CONFIG_LOADADDR         0x20800000
 145 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
 146 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 147
 148 /*
 149  * Extra Environments
 150  */
 151 #define CONFIG_PREBOOT          "run try_bootscript"
 152 #define CONFIG_HOSTNAME         ma5d4evk
 153
 154 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 155         "consdev=ttyS3\0"                                               \
 156         "baudrate=115200\0"                                             \
 157         "bootscript=boot.scr\0"                                         \
 158         "bootdev=/dev/mmcblk1p1\0"                                      \
 159         "bootpart=1:1\0"                                                \
 160         "rootdev=/dev/mmcblk1p2\0"                                      \
 161         "netdev=eth0\0"                                                 \
 162         "kernel_addr_r=0x22000000\0"                                    \
 163         "update_spi_firmware_spl_addr=0x21000000\0"                     \
 164         "update_spi_firmware_spl_filename=boot.bin\0"                   \
 165         "update_spi_firmware_addr=0x22000000\0"                         \
 166         "update_spi_firmware_filename=u-boot.img\0"                     \
 167         "update_spi_firmware="  /* Update the SPI flash firmware */     \
 168                 "if sf probe ; then "                                   \
 169                 "if tftp ${update_spi_firmware_spl_addr} "              \
 170                         "${update_spi_firmware_spl_filename} ; then "   \
 171                 "setenv update_spi_firmware_spl_filesize ${filesize} ; "\
 172                 "if tftp ${update_spi_firmware_addr} "                  \
 173                         "${update_spi_firmware_filename} ; then "       \
 174                 "setenv update_spi_firmware_filesize ${filesize} ; "    \
 175                 "sf update ${update_spi_firmware_spl_addr} 0x0 "        \
 176                         "${update_spi_firmware_spl_filesize} ; "        \
 177                 "sf update ${update_spi_firmware_addr} 0x10000 "        \
 178                         "${update_spi_firmware_filesize} ; "            \
 179                 "fi ; "                                                 \
 180                 "fi ; "                                                 \
 181                 "fi\0"                                                  \
 182         "addcons="                                                      \
 183                 "setenv bootargs ${bootargs} "                          \
 184                 "console=${consdev},${baudrate}\0"                      \
 185         "addip="                                                        \
 186                 "setenv bootargs ${bootargs} "                          \
 187                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 188                         "${netmask}:${hostname}:${netdev}:off\0"        \
 189         "addmisc="                                                      \
 190                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 191         "addargs=run addcons addmisc\0"                                 \
 192         "mmcload="                                                      \
 193                 "mmc rescan ; "                                         \
 194                 "load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0"   \
 195         "netload="                                                      \
 196                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 197         "miscargs=nohlt panic=1\0"                                      \
 198         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 199         "nfsargs="                                                      \
 200                 "setenv bootargs root=/dev/nfs rw "                     \
 201                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 202         "mmc_mmc="                                                      \
 203                 "run mmcload mmcargs addargs ; "                        \
 204                 "bootm ${kernel_addr_r}\0"                              \
 205         "mmc_nfs="                                                      \
 206                 "run mmcload nfsargs addip addargs ; "                  \
 207                 "bootm ${kernel_addr_r}\0"                              \
 208         "net_mmc="                                                      \
 209                 "run netload mmcargs addargs ; "                        \
 210                 "bootm ${kernel_addr_r}\0"                              \
 211         "net_nfs="                                                      \
 212                 "run netload nfsargs addip addargs ; "                  \
 213                 "bootm ${kernel_addr_r}\0"                              \
 214         "try_bootscript="                                               \
 215                 "mmc rescan;"                                           \
 216                 "if test -e mmc ${bootpart} ${bootscript} ; then "      \
 217                 "if load mmc ${bootpart} ${kernel_addr_r} ${bootscript};"\
 218                 "then ; "                                               \
 219                         "echo Running bootscript... ; "                 \
 220                         "source ${kernel_addr_r} ; "                    \
 221                 "fi ; "                                                 \
 222                 "fi\0"
 223 /* SPL */
 224 #define CONFIG_SPL_FRAMEWORK
 225 #define CONFIG_SPL_TEXT_BASE            0x200000
 226 #define CONFIG_SPL_MAX_SIZE             0x10000
 227 #define CONFIG_SPL_BSS_START_ADDR       0x20000000
 228 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 229 #define CONFIG_SYS_SPL_MALLOC_START     0x20080000
 230 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
 231
 232 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 233 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 234 #define CONFIG_SPL_GPIO_SUPPORT
 235 #define CONFIG_SPL_SERIAL_SUPPORT
 236
 237 #define CONFIG_SPL_BOARD_INIT
 238 #define CONFIG_SYS_MONITOR_LEN          (512 << 10)
 239
 240 #define CONFIG_SPL_SPI_SUPPORT
 241 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 242 #define CONFIG_SPL_SPI_LOAD
 243 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x10000
 244
 245 #endif  /* __MA5D4EVK_CONFIG_H__ */