include/configs/makalu.h

   1 /*
   2  * Copyright (c) 2008 Nuovation System Designs, LLC
   3  *   Grant Erickson <gerickson@nuovations.com>
   4  *
   5  * (C) Copyright 2007-2008
   6  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   7  *
   8  * See file CREDITS for list of people who contributed to this
   9  * project.
  10  *
  11  * This program is free software; you can redistribute it and/or
  12  * modify it under the terms of the GNU General Public License as
  13  * published by the Free Software Foundation; either version 2 of
  14  * the License, or (at your option) any later version.
  15  *
  16  * This program is distributed in the hope that it will be useful,
  17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  19  * GNU General Public License for more details.
  20  *
  21  * You should have received a copy of the GNU General Public License
  22  * along with this program; if not, write to the Free Software
  23  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  24  * MA 02111-1307 USA
  25  */
  26
  27 /************************************************************************
  28  * makalu.h - configuration for AMCC Makalu (405EX)
  29  ***********************************************************************/
  30
  31 #ifndef __CONFIG_H
  32 #define __CONFIG_H
  33
  34 /*-----------------------------------------------------------------------
  35  * High Level Configuration Options
  36  *----------------------------------------------------------------------*/
  37 #define CONFIG_MAKALU           1               /* Board is Makalu      */
  38 #define CONFIG_4xx              1               /* ... PPC4xx family    */
  39 #define CONFIG_405EX            1               /* Specifc 405EX support*/
  40 #define CONFIG_SYS_CLK_FREQ     33330000        /* ext frequency to pll */
  41
  42 /*
  43  * Include common defines/options for all AMCC eval boards
  44  */
  45 #define CONFIG_HOSTNAME makalu
  46 #define CONFIG_ADDMISC  "addmisc=setenv bootargs ${bootargs} rtc-x1205.probe=0,0x6f\0"
  47 #include "amcc-common.h"
  48
  49 #define CONFIG_BOARD_EARLY_INIT_F 1             /* Call board_early_init_f */
  50 #define CONFIG_MISC_INIT_R      1               /* Call misc_init_r     */
  51
  52 /*-----------------------------------------------------------------------
  53  * Base addresses -- Note these are effective addresses where the
  54  * actual resources get mapped (not physical addresses)
  55  *----------------------------------------------------------------------*/
  56 #define CONFIG_SYS_FLASH_BASE           0xFC000000
  57 #define CONFIG_SYS_FPGA_BASE            0xF0000000
  58
  59 /*-----------------------------------------------------------------------
  60  * Initial RAM & Stack Pointer Configuration Options
  61  *
  62  *   There are traditionally three options for the primordial
  63  *   (i.e. initial) stack usage on the 405-series:
  64  *
  65  *      1) On-chip Memory (OCM) (i.e. SRAM)
  66  *      2) Data cache
  67  *      3) SDRAM
  68  *
  69  *   For the 405EX(r), there is no OCM, so we are left with (2) or (3)
  70  *   the latter of which is less than desireable since it requires
  71  *   setting up the SDRAM and ECC in assembly code.
  72  *
  73  *   To use (2), define 'CONFIG_SYS_INIT_DCACHE_CS' to be an unused chip
  74  *   select on the External Bus Controller (EBC) and then select a
  75  *   value for 'CONFIG_SYS_INIT_RAM_ADDR' outside of the range of valid,
  76  *   physical SDRAM. Otherwise, undefine 'CONFIG_SYS_INIT_DCACHE_CS' and
  77  *   select a value for 'CONFIG_SYS_INIT_RAM_ADDR' within the range of valid,
  78  *   physical SDRAM to use (3).
  79  *-----------------------------------------------------------------------*/
  80
  81 #define CONFIG_SYS_INIT_DCACHE_CS       4
  82
  83 #if defined(CONFIG_SYS_INIT_DCACHE_CS)
  84 #define CONFIG_SYS_INIT_RAM_ADDR        (CONFIG_SYS_SDRAM_BASE + ( 1 << 30))    /*  1 GiB */
  85 #else
  86 #define CONFIG_SYS_INIT_RAM_ADDR        (CONFIG_SYS_SDRAM_BASE + (32 << 20))    /* 32 MiB */
  87 #endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
  88
  89 #define CONFIG_SYS_INIT_RAM_END        (4 << 10)                        /*  4 KiB */
  90 #define CONFIG_SYS_GBL_DATA_SIZE        256             /* num bytes initial data */
  91 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
  92
  93 /*
  94  * If the data cache is being used for the primordial stack and global
  95  * data area, the POST word must be placed somewhere else. The General
  96  * Purpose Timer (GPT) is unused by u-boot and the kernel and preserves
  97  * its compare and mask register contents across reset, so it is used
  98  * for the POST word.
  99  */
 100
 101 #if defined(CONFIG_SYS_INIT_DCACHE_CS)
 102 # define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 103 # define CONFIG_SYS_POST_ALT_WORD_ADDR  (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6)
 104 #else
 105 # define CONFIG_SYS_INIT_EXTRA_SIZE     16
 106 # define CONFIG_SYS_INIT_SP_OFFSET      (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_EXTRA_SIZE)
 107 # define CONFIG_SYS_POST_WORD_ADDR      (CONFIG_SYS_GBL_DATA_OFFSET - 4)
 108 # define CONFIG_SYS_OCM_DATA_ADDR       CONFIG_SYS_INIT_RAM_ADDR
 109 #endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */
 110
 111 /*-----------------------------------------------------------------------
 112  * Serial Port
 113  *----------------------------------------------------------------------*/
 114 #define CONFIG_CONS_INDEX       1       /* Use UART0                    */
 115 #undef CONFIG_SYS_EXT_SERIAL_CLOCK                      /* no ext. clk          */
 116
 117 /*-----------------------------------------------------------------------
 118  * Environment
 119  *----------------------------------------------------------------------*/
 120 #define CONFIG_ENV_IS_IN_FLASH     1    /* use FLASH for environment vars       */
 121
 122 /*-----------------------------------------------------------------------
 123  * FLASH related
 124  *----------------------------------------------------------------------*/
 125 #define CONFIG_SYS_FLASH_CFI                    /* The flash is CFI compatible  */
 126 #define CONFIG_FLASH_CFI_DRIVER         /* Use common CFI driver        */
 127
 128 #define CONFIG_SYS_FLASH_BANKS_LIST    {CONFIG_SYS_FLASH_BASE}
 129 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks           */
 130 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max number of sectors on one chip    */
 131
 132 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
 133 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)      */
 134
 135 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1     /* use buffered writes (20x faster)     */
 136 #define CONFIG_SYS_FLASH_EMPTY_INFO             /* print 'E' for empty sector on flinfo */
 137
 138 #ifdef CONFIG_ENV_IS_IN_FLASH
 139 #define CONFIG_ENV_SECT_SIZE    0x20000 /* size of one complete sector  */
 140 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE)
 141 #define CONFIG_ENV_SIZE         0x4000  /* Total Size of Environment Sector     */
 142
 143 /* Address and size of Redundant Environment Sector     */
 144 #define CONFIG_ENV_ADDR_REDUND  (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
 145 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 146 #endif /* CONFIG_ENV_IS_IN_FLASH */
 147
 148 /*-----------------------------------------------------------------------
 149  * DDR SDRAM
 150  *----------------------------------------------------------------------*/
 151 #define CONFIG_SYS_MBYTES_SDRAM        (256)            /* 256MB                        */
 152
 153 #define CONFIG_SYS_SDRAM0_MB0CF_BASE    ((  0 << 20) + CONFIG_SYS_SDRAM_BASE)
 154 #define CONFIG_SYS_SDRAM0_MB1CF_BASE    ((128 << 20) + CONFIG_SYS_SDRAM_BASE)
 155
 156 /* DDR1/2 SDRAM Device Control Register Data Values */
 157 #define CONFIG_SYS_SDRAM0_MB0CF ((CONFIG_SYS_SDRAM0_MB0CF_BASE >> 3)    | \
 158                                  SDRAM_RXBAS_SDSZ_128MB         | \
 159                                  SDRAM_RXBAS_SDAM_MODE2         | \
 160                                  SDRAM_RXBAS_SDBE_ENABLE)
 161 #define CONFIG_SYS_SDRAM0_MB1CF ((CONFIG_SYS_SDRAM0_MB1CF_BASE >> 3)    | \
 162                                  SDRAM_RXBAS_SDSZ_128MB         | \
 163                                  SDRAM_RXBAS_SDAM_MODE2         | \
 164                                  SDRAM_RXBAS_SDBE_ENABLE)
 165 #define CONFIG_SYS_SDRAM0_MB2CF SDRAM_RXBAS_SDBE_DISABLE
 166 #define CONFIG_SYS_SDRAM0_MB3CF SDRAM_RXBAS_SDBE_DISABLE
 167 #define CONFIG_SYS_SDRAM0_MCOPT1        0x04322000
 168 #define CONFIG_SYS_SDRAM0_MCOPT2        0x00000000
 169 #define CONFIG_SYS_SDRAM0_MODT0 0x01800000
 170 #define CONFIG_SYS_SDRAM0_MODT1 0x00000000
 171 #define CONFIG_SYS_SDRAM0_CODT          0x0080f837
 172 #define CONFIG_SYS_SDRAM0_RTR           0x06180000
 173 #define CONFIG_SYS_SDRAM0_INITPLR0      0xa8380000
 174 #define CONFIG_SYS_SDRAM0_INITPLR1      0x81900400
 175 #define CONFIG_SYS_SDRAM0_INITPLR2      0x81020000
 176 #define CONFIG_SYS_SDRAM0_INITPLR3      0x81030000
 177 #define CONFIG_SYS_SDRAM0_INITPLR4      0x81010404
 178 #define CONFIG_SYS_SDRAM0_INITPLR5      0x81000542
 179 #define CONFIG_SYS_SDRAM0_INITPLR6      0x81900400
 180 #define CONFIG_SYS_SDRAM0_INITPLR7      0x8D080000
 181 #define CONFIG_SYS_SDRAM0_INITPLR8      0x8D080000
 182 #define CONFIG_SYS_SDRAM0_INITPLR9      0x8D080000
 183 #define CONFIG_SYS_SDRAM0_INITPLR10     0x8D080000
 184 #define CONFIG_SYS_SDRAM0_INITPLR11     0x81000442
 185 #define CONFIG_SYS_SDRAM0_INITPLR12     0x81010780
 186 #define CONFIG_SYS_SDRAM0_INITPLR13     0x81010400
 187 #define CONFIG_SYS_SDRAM0_INITPLR14     0x00000000
 188 #define CONFIG_SYS_SDRAM0_INITPLR15     0x00000000
 189 #define CONFIG_SYS_SDRAM0_RQDC          0x80000038
 190 #define CONFIG_SYS_SDRAM0_RFDC          0x00000209
 191 #define CONFIG_SYS_SDRAM0_RDCC          0x40000000
 192 #define CONFIG_SYS_SDRAM0_DLCR          0x030000a5
 193 #define CONFIG_SYS_SDRAM0_CLKTR 0x80000000
 194 #define CONFIG_SYS_SDRAM0_WRDTR 0x00000000
 195 #define CONFIG_SYS_SDRAM0_SDTR1 0x80201000
 196 #define CONFIG_SYS_SDRAM0_SDTR2 0x32204232
 197 #define CONFIG_SYS_SDRAM0_SDTR3 0x080b0d1a
 198 #define CONFIG_SYS_SDRAM0_MMODE 0x00000442
 199 #define CONFIG_SYS_SDRAM0_MEMODE        0x00000404
 200
 201 /*-----------------------------------------------------------------------
 202  * I2C
 203  *----------------------------------------------------------------------*/
 204 #define CONFIG_SYS_I2C_SPEED            400000  /* I2C speed and slave address  */
 205
 206 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   6       /* 24C02 requires 5ms delay */
 207 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x52    /* I2C boot EEPROM (24C02BN)    */
 208 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1       /* Bytes of address             */
 209
 210 /* Standard DTT sensor configuration */
 211 #define CONFIG_DTT_DS1775       1
 212 #define CONFIG_DTT_SENSORS      { 0 }
 213 #define CONFIG_SYS_I2C_DTT_ADDR 0x48
 214
 215 /* RTC configuration */
 216 #define CONFIG_RTC_X1205        1
 217 #define CONFIG_SYS_I2C_RTC_ADDR 0x6f
 218
 219 /*-----------------------------------------------------------------------
 220  * Ethernet
 221  *----------------------------------------------------------------------*/
 222 #define CONFIG_M88E1111_PHY     1
 223 #define CONFIG_IBM_EMAC4_V4     1
 224 #define CONFIG_EMAC_PHY_MODE    EMAC_PHY_MODE_RGMII_RGMII
 225 #define CONFIG_PHY_ADDR         6       /* PHY address, See schematics  */
 226
 227 #define CONFIG_PHY_RESET        1       /* reset phy upon startup       */
 228 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 229
 230 #define CONFIG_HAS_ETH0         1
 231
 232 #define CONFIG_HAS_ETH1         1       /* add support for "eth1addr"   */
 233 #define CONFIG_PHY1_ADDR        0
 234
 235 /*
 236  * Default environment variables
 237  */
 238 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 239         CONFIG_AMCC_DEF_ENV                                             \
 240         CONFIG_AMCC_DEF_ENV_POWERPC                                     \
 241         CONFIG_AMCC_DEF_ENV_PPC_OLD                                     \
 242         CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
 243         "kernel_addr=fc000000\0"                                        \
 244         "fdt_addr=fc1e0000\0"                                           \
 245         "ramdisk_addr=fc200000\0"                                       \
 246         "pciconfighost=1\0"                                             \
 247         "pcie_mode=RP:RP\0"                                             \
 248         ""
 249
 250 /*
 251  * Commands additional to the ones defined in amcc-common.h
 252  */
 253 #define CONFIG_CMD_DATE
 254 #define CONFIG_CMD_DTT
 255 #define CONFIG_CMD_LOG
 256 #define CONFIG_CMD_PCI
 257 #define CONFIG_CMD_SNTP
 258
 259 /* POST support */
 260 #define CONFIG_POST             (CONFIG_SYS_POST_CACHE          | \
 261                                  CONFIG_SYS_POST_CPU            | \
 262                                  CONFIG_SYS_POST_ETHER          | \
 263                                  CONFIG_SYS_POST_I2C            | \
 264                                  CONFIG_SYS_POST_MEMORY | \
 265                                  CONFIG_SYS_POST_UART)
 266
 267 /* Define here the base-addresses of the UARTs to test in POST */
 268 #define CONFIG_SYS_POST_UART_TABLE      {UART0_BASE, UART1_BASE}
 269
 270 #define CONFIG_LOGBUFFER
 271 #define CONFIG_SYS_POST_CACHE_ADDR      0x00800000 /* free virtual address      */
 272
 273 #define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */
 274
 275 /*-----------------------------------------------------------------------
 276  * PCI stuff
 277  *----------------------------------------------------------------------*/
 278 #define CONFIG_PCI                      /* include pci support          */
 279 #define CONFIG_PCI_PNP          1       /* do pci plug-and-play         */
 280 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup  */
 281 #define CONFIG_PCI_CONFIG_HOST_BRIDGE
 282
 283 /*-----------------------------------------------------------------------
 284  * PCIe stuff
 285  *----------------------------------------------------------------------*/
 286 #define CONFIG_SYS_PCIE_MEMBASE 0x90000000      /* mapped PCIe memory   */
 287 #define CONFIG_SYS_PCIE_MEMSIZE 0x08000000      /* 128 Meg, smallest incr per port */
 288
 289 #define CONFIG_SYS_PCIE0_CFGBASE        0xa0000000      /* remote access */
 290 #define CONFIG_SYS_PCIE0_XCFGBASE       0xb0000000      /* local access */
 291 #define CONFIG_SYS_PCIE0_CFGMASK        0xe0000001      /* 512 Meg */
 292
 293 #define CONFIG_SYS_PCIE1_CFGBASE        0xc0000000      /* remote access */
 294 #define CONFIG_SYS_PCIE1_XCFGBASE       0xd0000000      /* local access */
 295 #define CONFIG_SYS_PCIE1_CFGMASK        0xe0000001      /* 512 Meg */
 296
 297 #define CONFIG_SYS_PCIE0_UTLBASE        0xef502000
 298 #define CONFIG_SYS_PCIE1_UTLBASE        0xef503000
 299
 300 /* base address of inbound PCIe window */
 301 #define CONFIG_SYS_PCIE_INBOUND_BASE    0x0000000000000000ULL
 302
 303 /*-----------------------------------------------------------------------
 304  * External Bus Controller (EBC) Setup
 305  *----------------------------------------------------------------------*/
 306 /* Memory Bank 0 (NOR-FLASH) initialization                                     */
 307 #define CONFIG_SYS_EBC_PB0AP            0x08033700
 308 #define CONFIG_SYS_EBC_PB0CR            (CONFIG_SYS_FLASH_BASE | 0xda000)
 309
 310 /* Memory Bank 2 (CPLD) initialization                                          */
 311 #define CONFIG_SYS_EBC_PB2AP           0x9400C800
 312 #define CONFIG_SYS_EBC_PB2CR           0xF0018000 /*  BAS=0x800,BS=1MB,BU=R/W,BW=8bit   */
 313
 314 #define CONFIG_SYS_EBC_CFG              0x7FC00000 /*  EBC0_CFG */
 315
 316 /*-----------------------------------------------------------------------
 317  * GPIO Setup
 318  *----------------------------------------------------------------------*/
 319 #define CONFIG_SYS_4xx_GPIO_TABLE { /*    Out             GPIO  Alternate1      Alternate2      Alternate3 */ \
 320 {                                                                                       \
 321 /* GPIO Core 0 */                                                                       \
 322 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO0 EBC_DATA_PAR(0)                 */      \
 323 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO1 EBC_DATA_PAR(1)                 */      \
 324 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO2 EBC_DATA_PAR(2)                 */      \
 325 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO3 EBC_DATA_PAR(3)                 */      \
 326 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO4 EBC_DATA(20)    USB2_DATA(4)    */      \
 327 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO5 EBC_DATA(21)    USB2_DATA(5)    */      \
 328 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO6 EBC_DATA(22)    USB2_DATA(6)    */      \
 329 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO7 EBC_DATA(23)    USB2_DATA(7)    */      \
 330 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 CS(1)/NFCE(1)   IRQ(7)          */      \
 331 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 CS(2)/NFCE(2)   IRQ(8)          */      \
 332 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 CS(3)/NFCE(3)  IRQ(9)          */      \
 333 {GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO11 IRQ(6)                         */      \
 334 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO12 EBC_DATA(16)   USB2_DATA(0)    */      \
 335 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO13 EBC_DATA(17)   USB2_DATA(1)    */      \
 336 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO14 EBC_DATA(18)   USB2_DATA(2)    */      \
 337 {GPIO0_BASE, GPIO_BI,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO15 EBC_DATA(19)   USB2_DATA(3)    */      \
 338 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO16 UART0_DCD      UART1_CTS       */      \
 339 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO17 UART0_DSR      UART1_RTS       */      \
 340 {GPIO0_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_0}, /* GPIO18 UART0_CTS                      */      \
 341 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO19 UART0_RTS                      */      \
 342 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO20 UART0_DTR      UART1_TX        */      \
 343 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO21 UART0_RI       UART1_RX        */      \
 344 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO22 EBC_HOLD_REQ   DMA_ACK2        */      \
 345 {GPIO0_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_0}, /* GPIO23 EBC_HOLD_ACK   DMA_REQ2        */      \
 346 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO24 EBC_EXT_REQ    DMA_EOT2        IRQ(4) */ \
 347 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO25 EBC_EXT_ACK    DMA_ACK3        IRQ(3) */ \
 348 {GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO26 EBC_ADDR(5)    DMA_EOT0        TS(3) */ \
 349 {GPIO0_BASE, GPIO_IN,  GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EBC_BUS_REQ    DMA_EOT3        IRQ(5) */ \
 350 {GPIO0_BASE, GPIO_IN,  GPIO_SEL , GPIO_OUT_0}, /* GPIO28                                */      \
 351 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO29 DMA_EOT1       IRQ(2)          */      \
 352 {GPIO0_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_0}, /* GPIO30 DMA_REQ1       IRQ(1)          */      \
 353 {GPIO0_BASE, GPIO_IN,  GPIO_ALT2, GPIO_OUT_0}, /* GPIO31 DMA_ACK1       IRQ(0)          */      \
 354 }                                                                                               \
 355 }
 356
 357 #define CONFIG_SYS_GPIO_PCIE_RST        23
 358 #define CONFIG_SYS_GPIO_PCIE_CLKREQ     27
 359 #define CONFIG_SYS_GPIO_PCIE_WAKE       28
 360
 361 #endif  /* __CONFIG_H */