include/configs/ms7720se.h

   1 /*
   2  * Configuation settings for the Hitachi Solution Engine 7720
   3  *
   4  * Copyright (C) 2007 Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MS7720SE_H
  10 #define __MS7720SE_H
  11
  12 #define CONFIG_CPU_SH7720       1
  13
  14 #define CONFIG_BOOTFILE         "/boot/zImage"
  15 #define CONFIG_LOADADDR         0x8E000000
  16
  17 #define CONFIG_DISPLAY_BOARDINFO
  18 #undef  CONFIG_SHOW_BOOT_PROGRESS
  19
  20 /* MEMORY */
  21 #define MS7720SE_SDRAM_BASE             0x8C000000
  22 #define MS7720SE_FLASH_BASE_1           0xA0000000
  23 #define MS7720SE_FLASH_BANK_SIZE        (8 * 1024 * 1024)
  24
  25 #define CONFIG_SYS_TEXT_BASE    0x8FFC0000
  26 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  27 #define CONFIG_SYS_PBSIZE       256     /* Buffer size for Console output */
  28 /* List of legal baudrate settings for this board */
  29 #define CONFIG_SYS_BAUDRATE_TABLE       { 115200 }
  30
  31 /* SCIF */
  32 #define CONFIG_CONS_SCIF0       1
  33
  34 #define CONFIG_SYS_MEMTEST_START        MS7720SE_SDRAM_BASE
  35 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
  36
  37 #define CONFIG_SYS_SDRAM_BASE           MS7720SE_SDRAM_BASE
  38 #define CONFIG_SYS_SDRAM_SIZE           (64 * 1024 * 1024)
  39
  40 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
  41 #define CONFIG_SYS_MONITOR_BASE MS7720SE_FLASH_BASE_1
  42 #define CONFIG_SYS_MONITOR_LEN          (128 * 1024)
  43 #define CONFIG_SYS_MALLOC_LEN           (256 * 1024)
  44 #define CONFIG_SYS_BOOTMAPSZ            (8 * 1024 * 1024)
  45
  46 /* FLASH */
  47 #define CONFIG_SYS_FLASH_CFI
  48 #define CONFIG_FLASH_CFI_DRIVER
  49 #undef  CONFIG_SYS_FLASH_QUIET_TEST
  50 #define CONFIG_SYS_FLASH_EMPTY_INFO     /* print 'E' for empty sector on flinfo */
  51
  52 #define CONFIG_SYS_FLASH_BASE           MS7720SE_FLASH_BASE_1
  53
  54 #define CONFIG_SYS_MAX_FLASH_SECT       150
  55 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  56 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
  57
  58 #define CONFIG_ENV_SECT_SIZE    (64 * 1024)
  59 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
  60 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
  61 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000
  62 #define CONFIG_SYS_FLASH_WRITE_TOUT     500
  63
  64 /* Board Clock */
  65 #define CONFIG_SYS_CLK_FREQ     33333333
  66 #define CONFIG_SH_TMU_CLK_FREQ CONFIG_SYS_CLK_FREQ
  67 #define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
  68 #define CONFIG_SYS_TMU_CLK_DIV          4       /* 4 (default), 16, 64, 256 or 1024 */
  69
  70 /* PCMCIA */
  71 #define CONFIG_IDE_PCMCIA       1
  72 #define CONFIG_MARUBUN_PCCARD   1
  73 #define CONFIG_PCMCIA_SLOT_A    1
  74 #define CONFIG_SYS_IDE_MAXDEVICE        1
  75 #define CONFIG_SYS_MARUBUN_MRSHPC       0xb83fffe0
  76 #define CONFIG_SYS_MARUBUN_MW1          0xb8400000
  77 #define CONFIG_SYS_MARUBUN_MW2          0xb8500000
  78 #define CONFIG_SYS_MARUBUN_IO           0xb8600000
  79
  80 #define CONFIG_SYS_PIO_MODE             1
  81 #define CONFIG_SYS_IDE_MAXBUS           1
  82 #define CONFIG_SYS_ATA_BASE_ADDR        CONFIG_SYS_MARUBUN_IO   /* base address */
  83 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x01F0          /* ide0 offste */
  84 #define CONFIG_SYS_ATA_DATA_OFFSET      0               /* data reg offset */
  85 #define CONFIG_SYS_ATA_REG_OFFSET       0               /* reg offset */
  86 #define CONFIG_SYS_ATA_ALT_OFFSET       0x200           /* alternate register offset */
  87 #define CONFIG_IDE_SWAP_IO
  88
  89 #endif  /* __MS7720SE_H */