include/configs/mx25pdk.h

   1 /*
   2  * (C) Copyright 2011 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include <asm/arch/imx-regs.h>
  11
  12 /* High Level Configuration Options */
  13
  14 #define CONFIG_MX25
  15 #define CONFIG_SYS_TEXT_BASE            0x81200000
  16 #define CONFIG_MXC_GPIO
  17 #define CONFIG_SYS_FSL_CLK
  18
  19 #define CONFIG_SYS_TIMER_RATE           32768
  20 #define CONFIG_SYS_TIMER_COUNTER        \
  21         (&((struct gpt_regs *)IMX_GPT1_BASE)->counter)
  22
  23 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  24 #define CONFIG_SETUP_MEMORY_TAGS
  25 #define CONFIG_INITRD_TAG
  26
  27 #define CONFIG_MACH_TYPE        MACH_TYPE_MX25_3DS
  28
  29 /* Size of malloc() pool */
  30 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  31
  32 /* Physical Memory Map */
  33
  34 #define CONFIG_NR_DRAM_BANKS    1
  35 #define PHYS_SDRAM_1            0x80000000
  36 #define PHYS_SDRAM_1_SIZE       (64 * 1024 * 1024)
  37
  38 #define CONFIG_BOARD_EARLY_INIT_F
  39 #define CONFIG_BOARD_LATE_INIT
  40
  41 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  42 #define CONFIG_SYS_INIT_RAM_ADDR        IMX_RAM_BASE
  43 #define CONFIG_SYS_INIT_RAM_SIZE        IMX_RAM_SIZE
  44
  45 #define CONFIG_SYS_INIT_SP_OFFSET \
  46         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  47 #define CONFIG_SYS_INIT_SP_ADDR \
  48         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  49
  50 /* Memory Test */
  51 #define CONFIG_SYS_MEMTEST_START        (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE/2)
  52 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)
  53
  54 /* Serial Info */
  55 #define CONFIG_MXC_UART
  56 #define CONFIG_MXC_UART_BASE    UART1_BASE
  57 #define CONFIG_CONS_INDEX       1       /* use UART0 for console */
  58 #define CONFIG_BAUDRATE         115200  /* Default baud rate */
  59
  60 /* No NOR flash present */
  61 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
  62 #define CONFIG_ENV_SIZE        (8 * 1024)
  63 #define CONFIG_SYS_MMC_ENV_DEV          0
  64
  65 #define CONFIG_SYS_NO_FLASH
  66 #define CONFIG_ENV_IS_IN_MMC
  67 #define CONFIG_SYS_MMC_ENV_DEV 0
  68
  69 /* U-Boot general configuration */
  70 #define CONFIG_AUTO_COMPLETE
  71 #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size  */
  72 /* Print buffer sz */
  73 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + \
  74                 sizeof(CONFIG_SYS_PROMPT) + 16)
  75 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
  76 /* Boot Argument Buffer Size */
  77 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  78 #define CONFIG_CMDLINE_EDITING
  79 #define CONFIG_SYS_LONGHELP
  80
  81 /* U-Boot commands */
  82
  83 /* Ethernet */
  84 #define CONFIG_FEC_MXC
  85 #define CONFIG_FEC_MXC_PHYADDR          0x1f
  86 #define CONFIG_MII
  87 #define CONFIG_ENV_OVERWRITE
  88
  89 /* ESDHC driver */
  90 #define CONFIG_MMC
  91 #define CONFIG_GENERIC_MMC
  92 #define CONFIG_FSL_ESDHC
  93 #define CONFIG_SYS_FSL_ESDHC_ADDR       IMX_MMC_SDHC1_BASE
  94 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  95
  96 /* PMIC Configs */
  97 #define CONFIG_POWER
  98 #define CONFIG_POWER_I2C
  99 #define CONFIG_POWER_FSL
 100 #define CONFIG_POWER_FSL_MC34704
 101 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    0x54
 102
 103 #define CONFIG_DOS_PARTITION
 104
 105 /* I2C Configs */
 106 #define CONFIG_SYS_I2C
 107 #define CONFIG_SYS_I2C_MXC
 108 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 109 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 110
 111 /* RTC */
 112 #define CONFIG_RTC_IMXDI
 113 #define CONFIG_CMD_DATE
 114
 115 /* Ethernet Configs */
 116
 117
 118 #define CONFIG_LOADADDR         0x81000000      /* loadaddr env var */
 119 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 120
 121 #define CONFIG_EXTRA_ENV_SETTINGS \
 122         "script=boot.scr\0" \
 123         "image=zImage\0" \
 124         "console=ttymxc0\0" \
 125         "splashpos=m,m\0" \
 126         "fdt_high=0xffffffff\0" \
 127         "initrd_high=0xffffffff\0" \
 128         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 129         "fdt_addr=0x82000000\0" \
 130         "boot_fdt=try\0" \
 131         "ip_dyn=yes\0" \
 132         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 133         "mmcpart=1\0" \
 134         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 135         "update_sd_firmware_filename=u-boot.imx\0" \
 136         "update_sd_firmware=" \
 137                 "if test ${ip_dyn} = yes; then " \
 138                         "setenv get_cmd dhcp; " \
 139                 "else " \
 140                         "setenv get_cmd tftp; " \
 141                 "fi; " \
 142                 "if mmc dev ${mmcdev}; then "   \
 143                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 144                                 "setexpr fw_sz ${filesize} / 0x200; " \
 145                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 146                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 147                         "fi; "  \
 148                 "fi\0" \
 149         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 150                 "root=${mmcroot}\0" \
 151         "loadbootscript=" \
 152                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 153         "bootscript=echo Running bootscript from mmc ...; " \
 154                 "source\0" \
 155         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 156         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 157         "mmcboot=echo Booting from mmc ...; " \
 158                 "run mmcargs; " \
 159                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 160                         "if run loadfdt; then " \
 161                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 162                         "else " \
 163                                 "if test ${boot_fdt} = try; then " \
 164                                         "bootz; " \
 165                                 "else " \
 166                                         "echo WARN: Cannot load the DT; " \
 167                                 "fi; " \
 168                         "fi; " \
 169                 "else " \
 170                         "bootz; " \
 171                 "fi;\0" \
 172         "netargs=setenv bootargs console=${console},${baudrate} " \
 173                 "root=/dev/nfs " \
 174         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 175                 "netboot=echo Booting from net ...; " \
 176                 "run netargs; " \
 177                 "if test ${ip_dyn} = yes; then " \
 178                         "setenv get_cmd dhcp; " \
 179                 "else " \
 180                         "setenv get_cmd tftp; " \
 181                 "fi; " \
 182                 "${get_cmd} ${image}; " \
 183                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 184                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 185                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 186                         "else " \
 187                                 "if test ${boot_fdt} = try; then " \
 188                                         "bootz; " \
 189                                 "else " \
 190                                         "echo WARN: Cannot load the DT; " \
 191                                 "fi; " \
 192                         "fi; " \
 193                 "else " \
 194                         "bootz; " \
 195                 "fi;\0"
 196
 197 #define CONFIG_BOOTCOMMAND \
 198            "mmc dev ${mmcdev}; if mmc rescan; then " \
 199                    "if run loadbootscript; then " \
 200                            "run bootscript; " \
 201                    "else " \
 202                            "if run loadimage; then " \
 203                                    "run mmcboot; " \
 204                            "else run netboot; " \
 205                            "fi; " \
 206                    "fi; " \
 207            "else run netboot; fi"
 208
 209 /* Miscellaneous configurable options */
 210 #define CONFIG_SYS_LONGHELP
 211 #define CONFIG_AUTO_COMPLETE
 212
 213 #define CONFIG_SYS_MAXARGS             16
 214 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 215
 216 #endif /* __CONFIG_H */