include/configs/mx31ads.h

   1 /*
   2  * Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
   3  *
   4  * Configuration settings for the MX31ADS Freescale board.
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License as
   8  * published by the Free Software Foundation; either version 2 of
   9  * the License, or (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  19  * MA 02111-1307 USA
  20  */
  21
  22 #ifndef __CONFIG_H
  23 #define __CONFIG_H
  24
  25 #include <asm/arch/mx31-regs.h>
  26
  27  /* High Level Configuration Options */
  28 #define CONFIG_ARM1136          1               /* This is an arm1136 CPU core */
  29 #define CONFIG_MX31             1               /* in a mx31 */
  30 #define CONFIG_MX31_HCLK_FREQ   26000000        /* RedBoot says 26MHz */
  31 #define CONFIG_MX31_CLK32       32768
  32
  33 #define CONFIG_DISPLAY_CPUINFO
  34 #define CONFIG_DISPLAY_BOARDINFO
  35
  36 /*
  37  * Disabled for now due to build problems under Debian and a significant increase
  38  * in the final file size: 144260 vs. 109536 Bytes.
  39  */
  40 #if 0
  41 #define CONFIG_OF_LIBFDT                1
  42 #define CONFIG_FIT                      1
  43 #define CONFIG_FIT_VERBOSE              1
  44 #endif
  45
  46 #define CONFIG_CMDLINE_TAG              1       /* enable passing of ATAGs */
  47 #define CONFIG_SETUP_MEMORY_TAGS        1
  48 #define CONFIG_INITRD_TAG               1
  49
  50 /*
  51  * Size of malloc() pool
  52  */
  53 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 128 * 1024)
  54 #define CONFIG_SYS_GBL_DATA_SIZE        128     /* size in bytes reserved for initial data */
  55
  56 /*
  57  * Hardware drivers
  58  */
  59
  60 #define CONFIG_MXC_UART 1
  61 #define CONFIG_SYS_MX31_UART1           1
  62
  63 #define CONFIG_HARD_SPI         1
  64 #define CONFIG_MXC_SPI          1
  65 #define CONFIG_DEFAULT_SPI_BUS  1
  66 #define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH)
  67
  68 #define CONFIG_FSL_PMIC
  69 #define CONFIG_FSL_PMIC_BUS     1
  70 #define CONFIG_FSL_PMIC_CS      0
  71 #define CONFIG_FSL_PMIC_CLK     1000000
  72 #define CONFIG_FSL_PMIC_MODE    (SPI_MODE_0 | SPI_CS_HIGH)
  73 #define CONFIG_RTC_MC13783      1
  74
  75 /* allow to overwrite serial and ethaddr */
  76 #define CONFIG_ENV_OVERWRITE
  77 #define CONFIG_CONS_INDEX       1
  78 #define CONFIG_BAUDRATE         115200
  79 #define CONFIG_SYS_BAUDRATE_TABLE       {9600, 19200, 38400, 57600, 115200}
  80
  81 /***********************************************************
  82  * Command definition
  83  ***********************************************************/
  84
  85 #include <config_cmd_default.h>
  86
  87 #define CONFIG_CMD_PING
  88 #define CONFIG_CMD_DHCP
  89 #define CONFIG_CMD_SPI
  90 #define CONFIG_CMD_DATE
  91
  92 #define CONFIG_BOOTDELAY        3
  93
  94 #define CONFIG_LOADADDR         0x80800000      /* loadaddr env var */
  95
  96 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  97         "netdev=eth0\0"                                                 \
  98         "uboot_addr=0xa0000000\0"                                       \
  99         "uboot=mx31ads/u-boot.bin\0"                                    \
 100         "kernel=mx31ads/uImage\0"                                       \
 101         "nfsroot=/opt/eldk/arm\0"                                       \
 102         "bootargs_base=setenv bootargs console=ttymxc0,115200\0"        \
 103         "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs "       \
 104                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0"       \
 105         "bootcmd=run bootcmd_net\0"                                     \
 106         "bootcmd_net=run bootargs_base bootargs_nfs; "                  \
 107                 "tftpboot ${loadaddr} ${kernel}; bootm\0"               \
 108         "prg_uboot=tftpboot ${loadaddr} ${uboot}; "                     \
 109                 "protect off ${uboot_addr} 0xa003ffff; "                \
 110                 "erase ${uboot_addr} 0xa003ffff; "                      \
 111                 "cp.b ${loadaddr} ${uboot_addr} ${filesize}; "          \
 112                 "setenv filesize; saveenv\0"
 113
 114 #define CONFIG_NET_MULTI
 115 #define CONFIG_CS8900
 116 #define CONFIG_CS8900_BASE      0xb4020300
 117 #define CONFIG_CS8900_BUS16             1       /* follow the Linux driver */
 118
 119 /*
 120  * The MX31ADS board seems to have a hardware "peculiarity" confirmed under
 121  * U-Boot, RedBoot and Linux: the ethernet Rx signal is reaching the CS8900A
 122  * controller inverted. The controller is capable of detecting and correcting
 123  * this, but it needs 4 network packets for that. Which means, at startup, you
 124  * will not receive answers to the first 4 packest, unless there have been some
 125  * broadcasts on the network, or your board is on a hub. Reducing the ARP
 126  * timeout from default 5 seconds to 200ms we speed up the initial TFTP
 127  * transfer, should the user wish one, significantly.
 128  */
 129 #define CONFIG_ARP_TIMEOUT      200UL
 130
 131 /*
 132  * Miscellaneous configurable options
 133  */
 134 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 135 #define CONFIG_SYS_PROMPT               "=> "
 136 #define CONFIG_SYS_CBSIZE               256             /* Console I/O Buffer Size */
 137 /* Print Buffer Size */
 138 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 139 #define CONFIG_SYS_MAXARGS              16              /* max number of command args */
 140 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 141
 142 #define CONFIG_SYS_MEMTEST_START        0               /* memtest works on */
 143 #define CONFIG_SYS_MEMTEST_END          0x10000
 144
 145 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 146
 147 #define CONFIG_SYS_HZ                   1000
 148
 149 #define CONFIG_CMDLINE_EDITING  1
 150
 151 /*-----------------------------------------------------------------------
 152  * Stack sizes
 153  *
 154  * The stack sizes are set up in start.S using the settings below
 155  */
 156 #define CONFIG_STACKSIZE        (128 * 1024)    /* regular stack */
 157
 158 /*-----------------------------------------------------------------------
 159  * Physical Memory Map
 160  */
 161 #define CONFIG_NR_DRAM_BANKS    1
 162 #define PHYS_SDRAM_1            CSD0_BASE
 163 #define PHYS_SDRAM_1_SIZE       (128 * 1024 * 1024)
 164
 165 /*-----------------------------------------------------------------------
 166  * FLASH and environment organization
 167  */
 168 #define CONFIG_SYS_FLASH_BASE           CS0_BASE
 169 #define CONFIG_SYS_MAX_FLASH_BANKS      1               /* max number of memory banks */
 170 #define CONFIG_SYS_MAX_FLASH_SECT       262             /* max number of sectors on one chip */
 171 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE   /* Monitor at beginning of flash */
 172 #define CONFIG_SYS_MONITOR_LEN          (256 * 1024)    /* Reserve 256KiB */
 173
 174 #define CONFIG_ENV_IS_IN_FLASH  1
 175 #define CONFIG_ENV_SECT_SIZE    (32 * 1024)
 176 #define CONFIG_ENV_SIZE         CONFIG_ENV_SECT_SIZE
 177
 178 /* Address and size of Redundant Environment Sector     */
 179 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
 180 #define CONFIG_ENV_SIZE_REDUND  CONFIG_ENV_SIZE
 181
 182 /* S29WS256N NOR flash has 4 32KiB small sectors at the beginning and at the end.
 183  * The rest of 32MiB is in 128KiB big sectors. U-Boot occupies the low 4 sectors,
 184  * if we put environment next to it, we will have to occupy 128KiB for it.
 185  * Putting it at the top of flash we use only 32KiB. */
 186 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + CONFIG_ENV_SECT_SIZE)
 187
 188 /*-----------------------------------------------------------------------
 189  * CFI FLASH driver setup
 190  */
 191 #define CONFIG_SYS_FLASH_CFI                    1 /* Flash memory is CFI compliant */
 192 #define CONFIG_FLASH_CFI_DRIVER         1 /* Use drivers/cfi_flash.c */
 193 #define CONFIG_FLASH_SPANSION_S29WS_N   1 /* A non-standard buffered write algorithm */
 194 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       1 /* Use buffered writes (~10x faster) */
 195 #define CONFIG_SYS_FLASH_PROTECTION             1 /* Use hardware sector protection */
 196
 197 /*
 198  * JFFS2 partitions
 199  */
 200 #undef CONFIG_CMD_MTDPARTS
 201 #define CONFIG_JFFS2_DEV        "nor0"
 202
 203 #endif /* __CONFIG_H */