include/configs/mx31pdk.h

   1 /*
   2  * (C) Copyright 2008 Magnus Lilja <lilja.magnus@gmail.com>
   3  *
   4  * (C) Copyright 2004
   5  * Texas Instruments.
   6  * Richard Woodruff <r-woodruff2@ti.com>
   7  * Kshitij Gupta <kshitij@ti.com>
   8  *
   9  * Configuration settings for the Freescale i.MX31 PDK board.
  10  *
  11  * See file CREDITS for list of people who contributed to this
  12  * project.
  13  *
  14  * This program is free software; you can redistribute it and/or
  15  * modify it under the terms of the GNU General Public License as
  16  * published by the Free Software Foundation; either version 2 of
  17  * the License, or (at your option) any later version.
  18  *
  19  * This program is distributed in the hope that it will be useful,
  20  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  21  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  22  * GNU General Public License for more details.
  23  *
  24  * You should have received a copy of the GNU General Public License
  25  * along with this program; if not, write to the Free Software
  26  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  27  * MA 02111-1307 USA
  28  */
  29
  30 #ifndef __CONFIG_H
  31 #define __CONFIG_H
  32
  33 #include <asm/arch/imx-regs.h>
  34
  35 /* High Level Configuration Options */
  36 #define CONFIG_ARM1136                  /* This is an arm1136 CPU core */
  37 #define CONFIG_MX31                     /* in a mx31 */
  38 #define CONFIG_MX31_HCLK_FREQ   26000000
  39 #define CONFIG_MX31_CLK32       32768
  40
  41 #define CONFIG_DISPLAY_CPUINFO
  42 #define CONFIG_DISPLAY_BOARDINFO
  43
  44 #define CONFIG_CMDLINE_TAG                      /* enable passing of ATAGs */
  45 #define CONFIG_SETUP_MEMORY_TAGS
  46 #define CONFIG_INITRD_TAG
  47
  48 #if defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
  49 #define CONFIG_SKIP_LOWLEVEL_INIT
  50 #endif
  51
  52 /*
  53  * Size of malloc() pool
  54  */
  55 #define CONFIG_SYS_MALLOC_LEN           (2*CONFIG_ENV_SIZE + 2 * 128 * 1024)
  56
  57 /*
  58  * Hardware drivers
  59  */
  60
  61 #define CONFIG_MXC_UART
  62 #define CONFIG_SYS_MX31_UART1
  63 #define CONFIG_HW_WATCHDOG
  64
  65 #define CONFIG_HARD_SPI
  66 #define CONFIG_MXC_SPI
  67 #define CONFIG_DEFAULT_SPI_BUS  1
  68 #define CONFIG_DEFAULT_SPI_MODE (SPI_MODE_0 | SPI_CS_HIGH)
  69
  70 #define CONFIG_FSL_PMIC
  71 #define CONFIG_FSL_PMIC_BUS     1
  72 #define CONFIG_FSL_PMIC_CS      2
  73 #define CONFIG_FSL_PMIC_CLK     1000000
  74 #define CONFIG_FSL_PMIC_MODE    (SPI_MODE_0 | SPI_CS_HIGH)
  75 #define CONFIG_RTC_MC13783
  76
  77 /* allow to overwrite serial and ethaddr */
  78 #define CONFIG_ENV_OVERWRITE
  79 #define CONFIG_CONS_INDEX               1
  80 #define CONFIG_BAUDRATE                 115200
  81 #define CONFIG_SYS_BAUDRATE_TABLE       {9600, 19200, 38400, 57600, 115200}
  82
  83 /***********************************************************
  84  * Command definition
  85  ***********************************************************/
  86
  87 #include <config_cmd_default.h>
  88
  89 #define CONFIG_CMD_MII
  90 #define CONFIG_CMD_PING
  91 #define CONFIG_CMD_SPI
  92 #define CONFIG_CMD_DATE
  93 #define CONFIG_CMD_NAND
  94
  95 /*
  96  * Disabled due to compilation errors in cmd_bootm.c (IMLS seems to require
  97  * that CFG_NO_FLASH is undefined).
  98  */
  99 #undef CONFIG_CMD_IMLS
 100
 101 #define BOARD_LATE_INIT
 102
 103 #define CONFIG_BOOTDELAY        3
 104
 105 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 106         "bootargs_base=setenv bootargs console=ttymxc0,115200\0"        \
 107         "bootargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs "       \
 108                 "ip=dhcp nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0"     \
 109         "bootcmd=run bootcmd_net\0"                                     \
 110         "bootcmd_net=run bootargs_base bootargs_mtd bootargs_nfs; "     \
 111                 "tftpboot 0x81000000 uImage-mx31; bootm\0"              \
 112         "prg_uboot=tftpboot 0x81000000 u-boot-nand.bin; "               \
 113                 "nand erase 0x0 0x40000; "                              \
 114                 "nand write 0x81000000 0x0 0x40000\0"
 115
 116 #define CONFIG_NET_MULTI
 117 #define CONFIG_SMC911X
 118 #define CONFIG_SMC911X_BASE     0xB6000000
 119 #define CONFIG_SMC911X_32_BIT
 120
 121 /*
 122  * Miscellaneous configurable options
 123  */
 124 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
 125 #define CONFIG_SYS_PROMPT       "uboot> "
 126 #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
 127 /* Print Buffer Size */
 128 #define CONFIG_SYS_PBSIZE       (CONFIG_SYS_CBSIZE + \
 129                                 sizeof(CONFIG_SYS_PROMPT)+16)
 130 /* max number of command args */
 131 #define CONFIG_SYS_MAXARGS      16
 132 /* Boot Argument Buffer Size */
 133 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 134
 135 /* memtest works on */
 136 #define CONFIG_SYS_MEMTEST_START        0x80000000
 137 #define CONFIG_SYS_MEMTEST_END          0x10000
 138
 139 /* default load address */
 140 #define CONFIG_SYS_LOAD_ADDR            0x81000000
 141
 142 #define CONFIG_SYS_HZ                   1000
 143
 144 #define CONFIG_CMDLINE_EDITING
 145
 146 /*-----------------------------------------------------------------------
 147  * Stack sizes
 148  *
 149  * The stack sizes are set up in start.S using the settings below
 150  */
 151 #define CONFIG_STACKSIZE        (128 * 1024) /* regular stack */
 152
 153 /*-----------------------------------------------------------------------
 154  * Physical Memory Map
 155  */
 156 #define CONFIG_NR_DRAM_BANKS    1
 157 #define PHYS_SDRAM_1            CSD0_BASE
 158 #define PHYS_SDRAM_1_SIZE       (128 * 1024 * 1024)
 159 #define CONFIG_BOARD_EARLY_INIT_F
 160
 161 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 162 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 163 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 164 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 165 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)
 166
 167 /*-----------------------------------------------------------------------
 168  * FLASH and environment organization
 169  */
 170 /* No NOR flash present */
 171 #define CONFIG_SYS_NO_FLASH
 172
 173 #define CONFIG_ENV_IS_IN_NAND
 174 #define CONFIG_ENV_OFFSET               0x40000
 175 #define CONFIG_ENV_OFFSET_REDUND        0x60000
 176 #define CONFIG_ENV_SIZE                 (128 * 1024)
 177
 178 /*
 179  * NAND driver
 180  */
 181 #define CONFIG_NAND_MXC
 182 #define CONFIG_MXC_NAND_REGS_BASE      NFC_BASE_ADDR
 183 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 184 #define CONFIG_SYS_NAND_BASE           NFC_BASE_ADDR
 185 #define CONFIG_MXC_NAND_HWECC
 186 #define CONFIG_SYS_NAND_LARGEPAGE
 187
 188 /* NAND configuration for the NAND_SPL */
 189
 190 /* Start copying real U-boot from the second page */
 191 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x800
 192 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x30000
 193 /* Load U-Boot to this address */
 194 #define CONFIG_SYS_NAND_U_BOOT_DST      0x87f00000
 195 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_NAND_U_BOOT_DST
 196
 197 #define CONFIG_SYS_NAND_PAGE_SIZE       0x800
 198 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 199 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 200 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
 201 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 202
 203
 204 /* Configuration of lowlevel_init.S (clocks and SDRAM) */
 205 #define CCM_CCMR_SETUP          0x074B0BF5
 206 #define CCM_PDR0_SETUP_532MHZ   (PDR0_CSI_PODF(0x1ff) | PDR0_PER_PODF(7) | \
 207                                  PDR0_HSP_PODF(3) | PDR0_NFC_PODF(5) |     \
 208                                  PDR0_IPG_PODF(1) | PDR0_MAX_PODF(3) |     \
 209                                  PDR0_MCU_PODF(0))
 210 #define CCM_MPCTL_SETUP_532MHZ  (PLL_PD(0) | PLL_MFD(51) | PLL_MFI(10) |   \
 211                                  PLL_MFN(12))
 212
 213 #define ESDMISC_MDDR_SETUP      0x00000004
 214 #define ESDMISC_MDDR_RESET_DL   0x0000000c
 215 #define ESDCFG0_MDDR_SETUP      0x006ac73a
 216
 217 #define ESDCTL_ROW_COL          (ESDCTL_SDE | ESDCTL_ROW(2) | ESDCTL_COL(2))
 218 #define ESDCTL_SETTINGS         (ESDCTL_ROW_COL | ESDCTL_SREFR(3) | \
 219                                  ESDCTL_DSIZ(2) | ESDCTL_BL(1))
 220 #define ESDCTL_PRECHARGE        (ESDCTL_ROW_COL | ESDCTL_CMD_PRECHARGE)
 221 #define ESDCTL_AUTOREFRESH      (ESDCTL_ROW_COL | ESDCTL_CMD_AUTOREFRESH)
 222 #define ESDCTL_LOADMODEREG      (ESDCTL_ROW_COL | ESDCTL_CMD_LOADMODEREG)
 223 #define ESDCTL_RW               ESDCTL_SETTINGS
 224
 225 #endif /* __CONFIG_H */