]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/mx51evk.h
Add initial support for Freescale mx51evk board
[people/ms/u-boot.git] / include / configs / mx51evk.h
1 /*
2 * Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
3 *
4 * (C) Copyright 2009 Freescale Semiconductor, Inc.
5 *
6 * Configuration settings for the MX51EVK Board
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24 #ifndef __CONFIG_H
25 #define __CONFIG_H
26
27
28 /* High Level Configuration Options */
29
30 #define CONFIG_MX51 /* in a mx51 */
31 #define CONFIG_SKIP_RELOCATE_UBOOT
32
33 #define CONFIG_MX51_HCLK_FREQ 24000000 /* RedBoot says 26MHz */
34 #define CONFIG_MX51_CLK32 32768
35 #define CONFIG_DISPLAY_CPUINFO
36 #define CONFIG_DISPLAY_BOARDINFO
37
38 #define CONFIG_L2_OFF
39
40 /*
41 * Disabled for now due to build problems under Debian and a significant
42 * increase in the final file size: 144260 vs. 109536 Bytes.
43 */
44
45 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
46 #define CONFIG_REVISION_TAG 1
47 #define CONFIG_SETUP_MEMORY_TAGS 1
48 #define CONFIG_INITRD_TAG 1
49
50 /*
51 * Size of malloc() pool
52 */
53 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
54 /* size in bytes reserved for initial data */
55 #define CONFIG_SYS_GBL_DATA_SIZE 128
56
57 /*
58 * Hardware drivers
59 */
60 #define CONFIG_MXC_UART
61 #define CONFIG_SYS_MX51_UART1
62
63 /*
64 * MMC Configs
65 * */
66 #define CONFIG_FSL_ESDHC
67 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
68 #define CONFIG_SYS_FSL_ESDHC_NUM 2
69
70 #define CONFIG_MMC
71
72 #define CONFIG_CMD_MMC
73 #define CONFIG_GENERIC_MMC
74 #define CONFIG_CMD_FAT
75 #define CONFIG_DOS_PARTITION
76
77 /*
78 * Eth Configs
79 */
80 #define CONFIG_HAS_ETH1
81 #define CONFIG_NET_MULTI
82 #define CONFIG_MII
83 #define CONFIG_DISCOVER_PHY
84
85 #define CONFIG_FEC_MXC
86 #define IMX_FEC_BASE FEC_BASE_ADDR
87 #define CONFIG_FEC_MXC_PHYADDR 0x1F
88
89 #define CONFIG_CMD_PING
90 #define CONFIG_CMD_DHCP
91 #define CONFIG_CMD_MII
92 #define CONFIG_CMD_NET
93
94 /* allow to overwrite serial and ethaddr */
95 #define CONFIG_ENV_OVERWRITE
96 #define CONFIG_CONS_INDEX 1
97 #define CONFIG_BAUDRATE 115200
98 #define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
99
100 /***********************************************************
101 * Command definition
102 ***********************************************************/
103
104 #include <config_cmd_default.h>
105
106 #undef CONFIG_CMD_IMLS
107
108 #define CONFIG_BOOTDELAY 3
109
110 #define CONFIG_PRIME "FEC0"
111
112 #define CONFIG_LOADADDR 0x90800000 /* loadaddr env var */
113
114 #define CONFIG_EXTRA_ENV_SETTINGS \
115 "netdev=eth0\0" \
116 "uboot_addr=0xa0000000\0" \
117 "uboot=u-boot.bin\0" \
118 "loadaddr=0x90800000\0" \
119 "bootargs_base=setenv bootargs console=tty "\
120 "console=ttymxc0,${baudrate}\0"\
121 "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs "\
122 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0"\
123 "bootcmd=run bootcmd_net\0" \
124 "bootcmd_net=run bootargs_base bootargs_nfs; " \
125 "tftpboot ${loadaddr} ${kernel}; bootm\0"
126
127 #define CONFIG_ARP_TIMEOUT 200UL
128
129 /*
130 * Miscellaneous configurable options
131 */
132 #define CONFIG_SYS_LONGHELP /* undef to save memory */
133 #define CONFIG_SYS_PROMPT "MX51EVK U-Boot > "
134 #define CONFIG_AUTO_COMPLETE
135 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
136 /* Print Buffer Size */
137 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
138 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
139 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
140
141 #define CONFIG_SYS_MEMTEST_START 0x90000000
142 #define CONFIG_SYS_MEMTEST_END 0x10000
143
144 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
145
146 #define CONFIG_SYS_HZ 1000
147 #define CONFIG_CMDLINE_EDITING
148
149 /*-----------------------------------------------------------------------
150 * Stack sizes
151 *
152 * The stack sizes are set up in start.S using the settings below
153 */
154 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
155
156 /*-----------------------------------------------------------------------
157 * Physical Memory Map
158 */
159 #define CONFIG_NR_DRAM_BANKS 1
160 #define PHYS_SDRAM_1 CSD0_BASE_ADDR
161 #define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024)
162
163 /*-----------------------------------------------------------------------
164 * FLASH and environment organization
165 */
166 #define CONFIG_SYS_NO_FLASH
167
168 #define CONFIG_ENV_SECT_SIZE (128 * 1024)
169 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
170 #define CONFIG_ENV_IS_NOWHERE
171
172 #endif