include/configs/mx53ard.h

   1 /*
   2  * Copyright (C) 2011 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the MX53ARD Freescale board.
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License as
   8  * published by the Free Software Foundation; either version 2 of
   9  * the License, or (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  19  * MA 02111-1307 USA
  20  */
  21
  22 #ifndef __CONFIG_H
  23 #define __CONFIG_H
  24
  25 #define CONFIG_MX53
  26
  27 #define CONFIG_DISPLAY_CPUINFO
  28 #define CONFIG_DISPLAY_BOARDINFO
  29
  30 #define CONFIG_MACH_TYPE        MACH_TYPE_MX53_ARD
  31
  32 #include <asm/arch/imx-regs.h>
  33
  34 #define CONFIG_CMDLINE_TAG                      /* enable passing of ATAGs */
  35 #define CONFIG_SETUP_MEMORY_TAGS
  36 #define CONFIG_INITRD_TAG
  37 #define CONFIG_REVISION_TAG
  38
  39 /* Size of malloc() pool */
  40 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  41
  42 #define CONFIG_BOARD_EARLY_INIT_F
  43 #define CONFIG_MXC_GPIO
  44
  45 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  46 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR_AXI
  47 #define CONFIG_NAND_MXC
  48 #define CONFIG_MXC_NAND_REGS_BASE       NFC_BASE_ADDR_AXI
  49 #define CONFIG_MXC_NAND_IP_REGS_BASE    NFC_BASE_ADDR
  50 #define CONFIG_SYS_NAND_LARGEPAGE
  51 #define CONFIG_MXC_NAND_HWECC
  52 #define CONFIG_SYS_NAND_USE_FLASH_BBT
  53 #define CONFIG_CMD_NAND
  54
  55 #define CONFIG_MXC_UART
  56 #define CONFIG_MXC_UART_BASE    UART1_BASE
  57
  58 /* I2C Configs */
  59 #define CONFIG_CMD_I2C
  60 #define CONFIG_HARD_I2C
  61 #define CONFIG_I2C_MXC
  62 #define CONFIG_SYS_I2C_BASE             I2C2_BASE_ADDR
  63 #define CONFIG_SYS_I2C_SPEED            100000
  64
  65 /* MMC Configs */
  66 #define CONFIG_FSL_ESDHC
  67 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  68 #define CONFIG_SYS_FSL_ESDHC_NUM        2
  69
  70 #define CONFIG_MMC
  71 #define CONFIG_CMD_MMC
  72 #define CONFIG_GENERIC_MMC
  73 #define CONFIG_CMD_FAT
  74 #define CONFIG_DOS_PARTITION
  75
  76 /* Eth Configs */
  77 #define CONFIG_HAS_ETH1
  78 #define CONFIG_MII
  79
  80 #define CONFIG_CMD_PING
  81 #define CONFIG_CMD_DHCP
  82 #define CONFIG_CMD_MII
  83 #define CONFIG_CMD_NET
  84
  85 /* allow to overwrite serial and ethaddr */
  86 #define CONFIG_ENV_OVERWRITE
  87 #define CONFIG_CONS_INDEX               1
  88 #define CONFIG_BAUDRATE                 115200
  89
  90 /* Command definition */
  91 #include <config_cmd_default.h>
  92
  93 #undef CONFIG_CMD_IMLS
  94 #define CONFIG_CMD_SETEXPR
  95
  96 #define CONFIG_BOOTDELAY        3
  97
  98 #define CONFIG_ETHPRIME         "smc911x"
  99
 100 /*Support LAN9217*/
 101 #define CONFIG_SMC911X
 102 #define CONFIG_SMC911X_16_BIT
 103 #define CONFIG_SMC911X_BASE CS1_BASE_ADDR
 104
 105 #define CONFIG_LOADADDR         0x72000000      /* loadaddr env var */
 106 #define CONFIG_SYS_TEXT_BASE    0x77800000
 107
 108 #define CONFIG_DEFAULT_FDT_FILE         "imx53-ard.dtb"
 109
 110 #define CONFIG_EXTRA_ENV_SETTINGS \
 111         "script=boot.scr\0" \
 112         "uimage=uImage\0" \
 113         "console=ttymxc0\0" \
 114         "fdt_high=0xffffffff\0" \
 115         "initrd_high=0xffffffff\0" \
 116         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 117         "fdt_addr=0x71000000\0" \
 118         "boot_fdt=try\0" \
 119         "ip_dyn=yes\0" \
 120         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 121         "mmcpart=1\0" \
 122         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 123         "update_sd_firmware_filename=u-boot.imx\0" \
 124         "update_sd_firmware=" \
 125                 "if test ${ip_dyn} = yes; then " \
 126                         "setenv get_cmd dhcp; " \
 127                 "else " \
 128                         "setenv get_cmd tftp; " \
 129                 "fi; " \
 130                 "if mmc dev ${mmcdev}; then "   \
 131                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 132                                 "setexpr fw_sz ${filesize} / 0x200; " \
 133                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 134                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 135                         "fi; "  \
 136                 "fi\0" \
 137         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 138                 "root=${mmcroot}\0" \
 139         "loadbootscript=" \
 140                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 141         "bootscript=echo Running bootscript from mmc ...; " \
 142                 "source\0" \
 143         "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
 144         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 145         "mmcboot=echo Booting from mmc ...; " \
 146                 "run mmcargs; " \
 147                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 148                         "if run loadfdt; then " \
 149                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 150                         "else " \
 151                                 "if test ${boot_fdt} = try; then " \
 152                                         "bootm; " \
 153                                 "else " \
 154                                         "echo WARN: Cannot load the DT; " \
 155                                 "fi; " \
 156                         "fi; " \
 157                 "else " \
 158                         "bootm; " \
 159                 "fi;\0" \
 160         "netargs=setenv bootargs console=${console},${baudrate} " \
 161                 "root=/dev/nfs " \
 162         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 163                 "netboot=echo Booting from net ...; " \
 164                 "run netargs; " \
 165                 "if test ${ip_dyn} = yes; then " \
 166                         "setenv get_cmd dhcp; " \
 167                 "else " \
 168                         "setenv get_cmd tftp; " \
 169                 "fi; " \
 170                 "${get_cmd} ${uimage}; " \
 171                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 172                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 173                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 174                         "else " \
 175                                 "if test ${boot_fdt} = try; then " \
 176                                         "bootm; " \
 177                                 "else " \
 178                                         "echo WARN: Cannot load the DT; " \
 179                                 "fi; " \
 180                         "fi; " \
 181                 "else " \
 182                         "bootm; " \
 183                 "fi;\0"
 184
 185 #define CONFIG_BOOTCOMMAND \
 186            "mmc dev ${mmcdev}; if mmc rescan; then " \
 187                    "if run loadbootscript; then " \
 188                            "run bootscript; " \
 189                    "else " \
 190                            "if run loaduimage; then " \
 191                                    "run mmcboot; " \
 192                            "else run netboot; " \
 193                            "fi; " \
 194                    "fi; " \
 195            "else run netboot; fi"
 196
 197 #define CONFIG_ARP_TIMEOUT      200UL
 198
 199 /* Miscellaneous configurable options */
 200 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 201 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 202 #define CONFIG_SYS_PROMPT               "MX53ARD U-Boot > "
 203 #define CONFIG_AUTO_COMPLETE
 204 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 205
 206 /* Print Buffer Size */
 207 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 208 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 209 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 210
 211 #define CONFIG_SYS_MEMTEST_START       0x70000000
 212 #define CONFIG_SYS_MEMTEST_END         0x70010000
 213
 214 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 215
 216 #define CONFIG_SYS_HZ           1000
 217 #define CONFIG_CMDLINE_EDITING
 218
 219 /* Physical Memory Map */
 220 #define CONFIG_NR_DRAM_BANKS    2
 221 #define PHYS_SDRAM_1            CSD0_BASE_ADDR
 222 #define PHYS_SDRAM_1_SIZE       (512 * 1024 * 1024)
 223 #define PHYS_SDRAM_2            CSD1_BASE_ADDR
 224 #define PHYS_SDRAM_2_SIZE       (512 * 1024 * 1024)
 225 #define PHYS_SDRAM_SIZE         (PHYS_SDRAM_1_SIZE + PHYS_SDRAM_2_SIZE)
 226
 227 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
 228 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
 229 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
 230
 231 #define CONFIG_SYS_INIT_SP_OFFSET \
 232         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 233 #define CONFIG_SYS_INIT_SP_ADDR \
 234         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 235
 236 /* FLASH and environment organization */
 237 #define CONFIG_SYS_NO_FLASH
 238
 239 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
 240 #define CONFIG_ENV_SIZE        (8 * 1024)
 241 #define CONFIG_ENV_IS_IN_MMC
 242 #define CONFIG_SYS_MMC_ENV_DEV  0
 243
 244 #define CONFIG_OF_LIBFDT
 245
 246 #define MX53ARD_CS1GCR1         (CSEN | DSZ(2))
 247 #define MX53ARD_CS1RCR1         (RCSN(2) | OEN (1) | RWSC(22))
 248 #define MX53ARD_CS1RCR2         RBEN(2)
 249 #define MX53ARD_CS1WCR1         (WCSN(2) | WEN(2) | WBEN(2) | WWSC(22))
 250
 251 #endif                          /* __CONFIG_H */