include/configs/mx53loco.h

   1 /*
   2  * Copyright (C) 2011 Freescale Semiconductor, Inc.
   3  * Jason Liu <r64343@freescale.com>
   4  *
   5  * Configuration settings for Freescale MX53 low cost board.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_MX53
  14
  15 #define CONFIG_MACH_TYPE        MACH_TYPE_MX53_LOCO
  16
  17 #include <asm/arch/imx-regs.h>
  18
  19 #define CONFIG_CMDLINE_TAG
  20 #define CONFIG_SETUP_MEMORY_TAGS
  21 #define CONFIG_INITRD_TAG
  22
  23 #define CONFIG_SYS_FSL_CLK
  24
  25 /* Size of malloc() pool */
  26 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  27
  28 #define CONFIG_MXC_GPIO
  29 #define CONFIG_REVISION_TAG
  30
  31 #define CONFIG_MXC_UART
  32 #define CONFIG_MXC_UART_BASE    UART1_BASE
  33
  34 /* MMC Configs */
  35 #define CONFIG_FSL_ESDHC
  36 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  37 #define CONFIG_SYS_FSL_ESDHC_NUM        2
  38
  39 /* Eth Configs */
  40 #define CONFIG_MII
  41
  42 #define CONFIG_FEC_MXC
  43 #define IMX_FEC_BASE    FEC_BASE_ADDR
  44 #define CONFIG_FEC_MXC_PHYADDR  0x1F
  45
  46 /* USB Configs */
  47 #define CONFIG_USB_EHCI
  48 #define CONFIG_USB_EHCI_MX5
  49 #define CONFIG_USB_HOST_ETHER
  50 #define CONFIG_USB_ETHER_ASIX
  51 #define CONFIG_USB_ETHER_MCS7830
  52 #define CONFIG_USB_ETHER_SMSC95XX
  53 #define CONFIG_MXC_USB_PORT     1
  54 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  55 #define CONFIG_MXC_USB_FLAGS    0
  56
  57 /* I2C Configs */
  58 #define CONFIG_SYS_I2C
  59 #define CONFIG_SYS_I2C_MXC
  60 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  61 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  62 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  63
  64 /* PMIC Controller */
  65 #define CONFIG_POWER
  66 #define CONFIG_POWER_I2C
  67 #define CONFIG_DIALOG_POWER
  68 #define CONFIG_POWER_FSL
  69 #define CONFIG_POWER_FSL_MC13892
  70 #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48
  71 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR    0x8
  72
  73 /* allow to overwrite serial and ethaddr */
  74 #define CONFIG_ENV_OVERWRITE
  75 #define CONFIG_CONS_INDEX               1
  76
  77 /* Command definition */
  78 #define CONFIG_SUPPORT_RAW_INITRD
  79
  80
  81 #define CONFIG_ETHPRIME         "FEC0"
  82
  83 #define CONFIG_LOADADDR         0x72000000      /* loadaddr env var */
  84 #define CONFIG_SYS_TEXT_BASE    0x77800000
  85
  86 #define CONFIG_EXTRA_ENV_SETTINGS \
  87         "script=boot.scr\0" \
  88         "image=zImage\0" \
  89         "fdt_addr=0x71000000\0" \
  90         "boot_fdt=try\0" \
  91         "ip_dyn=yes\0" \
  92         "mmcdev=0\0" \
  93         "mmcpart=1\0" \
  94         "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
  95         "mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot}\0" \
  96         "loadbootscript=" \
  97                 "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  98         "bootscript=echo Running bootscript from mmc ...; " \
  99                 "source\0" \
 100         "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 101         "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 102         "mmcboot=echo Booting from mmc ...; " \
 103                 "run mmcargs; " \
 104                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 105                         "if run loadfdt; then " \
 106                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 107                         "else " \
 108                                 "if test ${boot_fdt} = try; then " \
 109                                         "bootz; " \
 110                                 "else " \
 111                                         "echo WARN: Cannot load the DT; " \
 112                                 "fi; " \
 113                         "fi; " \
 114                 "else " \
 115                         "bootz; " \
 116                 "fi;\0" \
 117         "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
 118                 "root=/dev/nfs " \
 119                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 120         "netboot=echo Booting from net ...; " \
 121                 "run netargs; " \
 122                 "if test ${ip_dyn} = yes; then " \
 123                         "setenv get_cmd dhcp; " \
 124                 "else " \
 125                         "setenv get_cmd tftp; " \
 126                 "fi; " \
 127                 "${get_cmd} ${image}; " \
 128                 "if test ${boot_fdt} = yes ||  test ${boot_fdt} = try; then " \
 129                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 130                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 131                         "else " \
 132                                 "if test ${boot_fdt} = try; then " \
 133                                         "bootz; " \
 134                                 "else " \
 135                                         "echo ERROR: Cannot load the DT; " \
 136                                         "exit; " \
 137                                 "fi; " \
 138                         "fi; " \
 139                 "else " \
 140                         "bootz; " \
 141                 "fi;\0"
 142
 143 #define CONFIG_BOOTCOMMAND \
 144         "mmc dev ${mmcdev}; if mmc rescan; then " \
 145                 "if run loadbootscript; then " \
 146                         "run bootscript; " \
 147                 "else " \
 148                         "if run loadimage; then " \
 149                                 "run mmcboot; " \
 150                         "else run netboot; " \
 151                         "fi; " \
 152                 "fi; " \
 153         "else run netboot; fi"
 154
 155 #define CONFIG_ARP_TIMEOUT      200UL
 156
 157 /* Miscellaneous configurable options */
 158 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 159 #define CONFIG_AUTO_COMPLETE
 160 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 161
 162 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 163 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 164
 165 #define CONFIG_SYS_MEMTEST_START       0x70000000
 166 #define CONFIG_SYS_MEMTEST_END         0x70010000
 167
 168 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 169
 170 #define CONFIG_CMDLINE_EDITING
 171
 172 /* Physical Memory Map */
 173 #define CONFIG_NR_DRAM_BANKS    2
 174 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
 175 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
 176 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
 177 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
 178 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
 179
 180 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
 181 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
 182 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
 183
 184 #define CONFIG_SYS_INIT_SP_OFFSET \
 185         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 186 #define CONFIG_SYS_INIT_SP_ADDR \
 187         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 188
 189 /* environment organization */
 190 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
 191 #define CONFIG_ENV_SIZE        (8 * 1024)
 192 #define CONFIG_ENV_IS_IN_MMC
 193 #define CONFIG_SYS_MMC_ENV_DEV 0
 194
 195 #define CONFIG_CMD_SATA
 196 #ifdef CONFIG_CMD_SATA
 197         #define CONFIG_DWC_AHSATA
 198         #define CONFIG_SYS_SATA_MAX_DEVICE      1
 199         #define CONFIG_DWC_AHSATA_PORT_ID       0
 200         #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
 201         #define CONFIG_LBA48
 202         #define CONFIG_LIBATA
 203 #endif
 204
 205 /* Framebuffer and LCD */
 206 #define CONFIG_PREBOOT
 207 #define CONFIG_VIDEO_IPUV3
 208 #define CONFIG_VIDEO_BMP_RLE8
 209 #define CONFIG_SPLASH_SCREEN
 210 #define CONFIG_BMP_16BPP
 211 #define CONFIG_VIDEO_LOGO
 212 #define CONFIG_IPUV3_CLK        200000000
 213
 214 #endif                          /* __CONFIG_H */