]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/mx53loco.h
common/board_f.c: modify the macro to use get_clocks() more common
[people/ms/u-boot.git] / include / configs / mx53loco.h
1 /*
2 * Copyright (C) 2011 Freescale Semiconductor, Inc.
3 * Jason Liu <r64343@freescale.com>
4 *
5 * Configuration settings for Freescale MX53 low cost board.
6 *
7 * SPDX-License-Identifier: GPL-2.0+
8 */
9
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13 #define CONFIG_MX53
14
15 #define CONFIG_DISPLAY_BOARDINFO
16
17 #define CONFIG_MACH_TYPE MACH_TYPE_MX53_LOCO
18
19 #include <asm/arch/imx-regs.h>
20
21 #define CONFIG_CMDLINE_TAG
22 #define CONFIG_SETUP_MEMORY_TAGS
23 #define CONFIG_INITRD_TAG
24
25 #define CONFIG_FSL_CLK
26
27 /* Size of malloc() pool */
28 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
29
30 #define CONFIG_BOARD_EARLY_INIT_F
31 #define CONFIG_BOARD_LATE_INIT
32 #define CONFIG_MXC_GPIO
33 #define CONFIG_REVISION_TAG
34
35 #define CONFIG_MXC_UART
36 #define CONFIG_MXC_UART_BASE UART1_BASE
37
38 /* MMC Configs */
39 #define CONFIG_FSL_ESDHC
40 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
41 #define CONFIG_SYS_FSL_ESDHC_NUM 2
42
43 #define CONFIG_MMC
44 #define CONFIG_CMD_MMC
45 #define CONFIG_GENERIC_MMC
46 #define CONFIG_CMD_FS_GENERIC
47 #define CONFIG_CMD_FAT
48 #define CONFIG_CMD_EXT2
49 #define CONFIG_DOS_PARTITION
50
51 /* Eth Configs */
52 #define CONFIG_MII
53
54 #define CONFIG_FEC_MXC
55 #define IMX_FEC_BASE FEC_BASE_ADDR
56 #define CONFIG_FEC_MXC_PHYADDR 0x1F
57
58 #define CONFIG_CMD_PING
59 #define CONFIG_CMD_DHCP
60 #define CONFIG_CMD_MII
61
62 /* USB Configs */
63 #define CONFIG_CMD_USB
64 #define CONFIG_CMD_FAT
65 #define CONFIG_USB_EHCI
66 #define CONFIG_USB_EHCI_MX5
67 #define CONFIG_USB_STORAGE
68 #define CONFIG_USB_HOST_ETHER
69 #define CONFIG_USB_ETHER_ASIX
70 #define CONFIG_USB_ETHER_MCS7830
71 #define CONFIG_USB_ETHER_SMSC95XX
72 #define CONFIG_MXC_USB_PORT 1
73 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
74 #define CONFIG_MXC_USB_FLAGS 0
75
76 /* I2C Configs */
77 #define CONFIG_SYS_I2C
78 #define CONFIG_SYS_I2C_MXC
79 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
80 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
81 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
82
83 /* PMIC Controller */
84 #define CONFIG_POWER
85 #define CONFIG_POWER_I2C
86 #define CONFIG_DIALOG_POWER
87 #define CONFIG_POWER_FSL
88 #define CONFIG_POWER_FSL_MC13892
89 #define CONFIG_SYS_DIALOG_PMIC_I2C_ADDR 0x48
90 #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 0x8
91
92 /* allow to overwrite serial and ethaddr */
93 #define CONFIG_ENV_OVERWRITE
94 #define CONFIG_CONS_INDEX 1
95 #define CONFIG_BAUDRATE 115200
96
97 /* Command definition */
98 #define CONFIG_CMD_BOOTZ
99 #define CONFIG_SUPPORT_RAW_INITRD
100
101 #define CONFIG_BOOTDELAY 1
102
103 #define CONFIG_ETHPRIME "FEC0"
104
105 #define CONFIG_LOADADDR 0x72000000 /* loadaddr env var */
106 #define CONFIG_SYS_TEXT_BASE 0x77800000
107
108 #define CONFIG_EXTRA_ENV_SETTINGS \
109 "script=boot.scr\0" \
110 "image=zImage\0" \
111 "fdt_addr=0x71000000\0" \
112 "boot_fdt=try\0" \
113 "ip_dyn=yes\0" \
114 "mmcdev=0\0" \
115 "mmcpart=1\0" \
116 "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
117 "mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot}\0" \
118 "loadbootscript=" \
119 "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
120 "bootscript=echo Running bootscript from mmc ...; " \
121 "source\0" \
122 "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
123 "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
124 "mmcboot=echo Booting from mmc ...; " \
125 "run mmcargs; " \
126 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
127 "if run loadfdt; then " \
128 "bootz ${loadaddr} - ${fdt_addr}; " \
129 "else " \
130 "if test ${boot_fdt} = try; then " \
131 "bootz; " \
132 "else " \
133 "echo WARN: Cannot load the DT; " \
134 "fi; " \
135 "fi; " \
136 "else " \
137 "bootz; " \
138 "fi;\0" \
139 "netargs=setenv bootargs console=ttymxc0,${baudrate} " \
140 "root=/dev/nfs " \
141 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
142 "netboot=echo Booting from net ...; " \
143 "run netargs; " \
144 "if test ${ip_dyn} = yes; then " \
145 "setenv get_cmd dhcp; " \
146 "else " \
147 "setenv get_cmd tftp; " \
148 "fi; " \
149 "${get_cmd} ${image}; " \
150 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
151 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
152 "bootz ${loadaddr} - ${fdt_addr}; " \
153 "else " \
154 "if test ${boot_fdt} = try; then " \
155 "bootz; " \
156 "else " \
157 "echo ERROR: Cannot load the DT; " \
158 "exit; " \
159 "fi; " \
160 "fi; " \
161 "else " \
162 "bootz; " \
163 "fi;\0"
164
165 #define CONFIG_BOOTCOMMAND \
166 "mmc dev ${mmcdev}; if mmc rescan; then " \
167 "if run loadbootscript; then " \
168 "run bootscript; " \
169 "else " \
170 "if run loadimage; then " \
171 "run mmcboot; " \
172 "else run netboot; " \
173 "fi; " \
174 "fi; " \
175 "else run netboot; fi"
176
177 #define CONFIG_ARP_TIMEOUT 200UL
178
179 /* Miscellaneous configurable options */
180 #define CONFIG_SYS_LONGHELP /* undef to save memory */
181 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
182 #define CONFIG_AUTO_COMPLETE
183 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
184
185 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
186 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
187
188 #define CONFIG_SYS_MEMTEST_START 0x70000000
189 #define CONFIG_SYS_MEMTEST_END 0x70010000
190
191 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
192
193 #define CONFIG_CMDLINE_EDITING
194
195 /* Physical Memory Map */
196 #define CONFIG_NR_DRAM_BANKS 2
197 #define PHYS_SDRAM_1 CSD0_BASE_ADDR
198 #define PHYS_SDRAM_1_SIZE (gd->bd->bi_dram[0].size)
199 #define PHYS_SDRAM_2 CSD1_BASE_ADDR
200 #define PHYS_SDRAM_2_SIZE (gd->bd->bi_dram[1].size)
201 #define PHYS_SDRAM_SIZE (gd->ram_size)
202
203 #define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
204 #define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
205 #define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
206
207 #define CONFIG_SYS_INIT_SP_OFFSET \
208 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
209 #define CONFIG_SYS_INIT_SP_ADDR \
210 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
211
212 /* FLASH and environment organization */
213 #define CONFIG_SYS_NO_FLASH
214
215 #define CONFIG_ENV_OFFSET (6 * 64 * 1024)
216 #define CONFIG_ENV_SIZE (8 * 1024)
217 #define CONFIG_ENV_IS_IN_MMC
218 #define CONFIG_SYS_MMC_ENV_DEV 0
219
220 #define CONFIG_OF_LIBFDT
221
222 #define CONFIG_CMD_SATA
223 #ifdef CONFIG_CMD_SATA
224 #define CONFIG_DWC_AHSATA
225 #define CONFIG_SYS_SATA_MAX_DEVICE 1
226 #define CONFIG_DWC_AHSATA_PORT_ID 0
227 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR
228 #define CONFIG_LBA48
229 #define CONFIG_LIBATA
230 #endif
231
232 /* Framebuffer and LCD */
233 #define CONFIG_PREBOOT
234 #define CONFIG_VIDEO
235 #define CONFIG_VIDEO_IPUV3
236 #define CONFIG_CFB_CONSOLE
237 #define CONFIG_VGA_AS_SINGLE_DEVICE
238 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
239 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
240 #define CONFIG_VIDEO_BMP_RLE8
241 #define CONFIG_SPLASH_SCREEN
242 #define CONFIG_BMP_16BPP
243 #define CONFIG_VIDEO_LOGO
244 #define CONFIG_IPUV3_CLK 200000000
245
246 #endif /* __CONFIG_H */