include/configs/mx6sabre_common.h

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX6QSABRE_COMMON_CONFIG_H
  10 #define __MX6QSABRE_COMMON_CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define CONFIG_IMX_THERMAL
  15
  16 /* Size of malloc() pool */
  17 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  18
  19 #define CONFIG_BOARD_EARLY_INIT_F
  20 #define CONFIG_BOARD_LATE_INIT
  21
  22 #define CONFIG_MXC_UART
  23
  24 /* MMC Configs */
  25 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  26
  27 #define CONFIG_CMD_PING
  28 #define CONFIG_CMD_DHCP
  29 #define CONFIG_CMD_MII
  30 #define CONFIG_FEC_MXC
  31 #define CONFIG_MII
  32 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  33 #define CONFIG_FEC_XCV_TYPE             RGMII
  34 #define CONFIG_ETHPRIME                 "FEC"
  35 #define CONFIG_FEC_MXC_PHYADDR          1
  36
  37 #define CONFIG_PHYLIB
  38 #define CONFIG_PHY_ATHEROS
  39
  40 #define CONFIG_CMD_SF
  41 #ifdef CONFIG_CMD_SF
  42 #define CONFIG_SPI_FLASH_STMICRO
  43 #define CONFIG_MXC_SPI
  44 #define CONFIG_SF_DEFAULT_BUS           0
  45 #define CONFIG_SF_DEFAULT_CS            0
  46 #define CONFIG_SF_DEFAULT_SPEED         20000000
  47 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  48 #endif
  49
  50 /* Command definition */
  51 #define CONFIG_CMD_BMODE
  52
  53 #ifdef CONFIG_SUPPORT_EMMC_BOOT
  54 #define EMMC_ENV \
  55         "emmcdev=2\0" \
  56         "update_emmc_firmware=" \
  57                 "if test ${ip_dyn} = yes; then " \
  58                         "setenv get_cmd dhcp; " \
  59                 "else " \
  60                         "setenv get_cmd tftp; " \
  61                 "fi; " \
  62                 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
  63                         "if mmc dev ${emmcdev} 1; then "        \
  64                                 "setexpr fw_sz ${filesize} / 0x200; " \
  65                                 "setexpr fw_sz ${fw_sz} + 1; "  \
  66                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
  67                         "fi; "  \
  68                 "fi\0"
  69 #else
  70 #define EMMC_ENV ""
  71 #endif
  72
  73 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  74
  75 #define CONFIG_EXTRA_ENV_SETTINGS \
  76         "script=boot.scr\0" \
  77         "image=zImage\0" \
  78         "fdt_file=undefined\0" \
  79         "fdt_addr=0x18000000\0" \
  80         "boot_fdt=try\0" \
  81         "ip_dyn=yes\0" \
  82         "console=" CONFIG_CONSOLE_DEV "\0" \
  83         "dfuspi=dfu 0 sf 0:0:10000000:0\0" \
  84         "dfu_alt_info_spl=spl raw 0x400\0" \
  85         "dfu_alt_info_img=u-boot raw 0x10000\0" \
  86         "dfu_alt_info=spl raw 0x400\0" \
  87         "fdt_high=0xffffffff\0"   \
  88         "initrd_high=0xffffffff\0" \
  89         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
  90         "mmcpart=1\0" \
  91         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
  92         "update_sd_firmware=" \
  93                 "if test ${ip_dyn} = yes; then " \
  94                         "setenv get_cmd dhcp; " \
  95                 "else " \
  96                         "setenv get_cmd tftp; " \
  97                 "fi; " \
  98                 "if mmc dev ${mmcdev}; then "   \
  99                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 100                                 "setexpr fw_sz ${filesize} / 0x200; " \
 101                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 102                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 103                         "fi; "  \
 104                 "fi\0" \
 105         EMMC_ENV          \
 106         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 107                 "root=${mmcroot}\0" \
 108         "loadbootscript=" \
 109                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 110         "bootscript=echo Running bootscript from mmc ...; " \
 111                 "source\0" \
 112         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 113         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 114         "mmcboot=echo Booting from mmc ...; " \
 115                 "run mmcargs; " \
 116                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 117                         "if run loadfdt; then " \
 118                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 119                         "else " \
 120                                 "if test ${boot_fdt} = try; then " \
 121                                         "bootz; " \
 122                                 "else " \
 123                                         "echo WARN: Cannot load the DT; " \
 124                                 "fi; " \
 125                         "fi; " \
 126                 "else " \
 127                         "bootz; " \
 128                 "fi;\0" \
 129         "netargs=setenv bootargs console=${console},${baudrate} " \
 130                 "root=/dev/nfs " \
 131                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 132         "netboot=echo Booting from net ...; " \
 133                 "run netargs; " \
 134                 "if test ${ip_dyn} = yes; then " \
 135                         "setenv get_cmd dhcp; " \
 136                 "else " \
 137                         "setenv get_cmd tftp; " \
 138                 "fi; " \
 139                 "${get_cmd} ${image}; " \
 140                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 141                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 142                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 143                         "else " \
 144                                 "if test ${boot_fdt} = try; then " \
 145                                         "bootz; " \
 146                                 "else " \
 147                                         "echo WARN: Cannot load the DT; " \
 148                                 "fi; " \
 149                         "fi; " \
 150                 "else " \
 151                         "bootz; " \
 152                 "fi;\0" \
 153                 "findfdt="\
 154                         "if test $fdt_file = undefined; then " \
 155                                 "if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \
 156                                         "setenv fdt_file imx6qp-sabreauto.dtb; fi; " \
 157                                 "if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \
 158                                         "setenv fdt_file imx6q-sabreauto.dtb; fi; " \
 159                                 "if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \
 160                                         "setenv fdt_file imx6dl-sabreauto.dtb; fi; " \
 161                                 "if test $board_name = SABRESD && test $board_rev = MX6QP; then " \
 162                                         "setenv fdt_file imx6qp-sabresd.dtb; fi; " \
 163                                 "if test $board_name = SABRESD && test $board_rev = MX6Q; then " \
 164                                         "setenv fdt_file imx6q-sabresd.dtb; fi; " \
 165                                 "if test $board_name = SABRESD && test $board_rev = MX6DL; then " \
 166                                         "setenv fdt_file imx6dl-sabresd.dtb; fi; " \
 167                                 "if test $fdt_file = undefined; then " \
 168                                         "echo WARNING: Could not determine dtb to use; fi; " \
 169                         "fi;\0" \
 170
 171
 172 #define CONFIG_BOOTCOMMAND \
 173         "run findfdt;" \
 174         "mmc dev ${mmcdev};" \
 175         "if mmc rescan; then " \
 176                 "if run loadbootscript; then " \
 177                 "run bootscript; " \
 178                 "else " \
 179                         "if run loadimage; then " \
 180                                 "run mmcboot; " \
 181                         "else run netboot; " \
 182                         "fi; " \
 183                 "fi; " \
 184         "else run netboot; fi"
 185
 186 #define CONFIG_ARP_TIMEOUT     200UL
 187
 188 #define CONFIG_SYS_MEMTEST_START       0x10000000
 189 #define CONFIG_SYS_MEMTEST_END         0x10010000
 190 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 191
 192 #define CONFIG_STACKSIZE               (128 * 1024)
 193
 194 /* Physical Memory Map */
 195 #define CONFIG_NR_DRAM_BANKS           1
 196 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 197
 198 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 199 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 200 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 201
 202 #define CONFIG_SYS_INIT_SP_OFFSET \
 203         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 204 #define CONFIG_SYS_INIT_SP_ADDR \
 205         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 206
 207 /* Environment organization */
 208 #define CONFIG_ENV_SIZE                 (8 * 1024)
 209
 210 #define CONFIG_ENV_IS_IN_MMC
 211
 212 #if defined(CONFIG_ENV_IS_IN_MMC)
 213 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 214 #endif
 215
 216 /* Framebuffer */
 217 #define CONFIG_VIDEO
 218 #define CONFIG_VIDEO_IPUV3
 219 #define CONFIG_CFB_CONSOLE
 220 #define CONFIG_VGA_AS_SINGLE_DEVICE
 221 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 222 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 223 #define CONFIG_VIDEO_BMP_RLE8
 224 #define CONFIG_SPLASH_SCREEN
 225 #define CONFIG_SPLASH_SCREEN_ALIGN
 226 #define CONFIG_BMP_16BPP
 227 #define CONFIG_VIDEO_LOGO
 228 #define CONFIG_VIDEO_BMP_LOGO
 229 #define CONFIG_IPUV3_CLK 260000000
 230 #define CONFIG_IMX_HDMI
 231 #define CONFIG_IMX_VIDEO_SKIP
 232
 233 #ifndef CONFIG_SPL
 234 #define CONFIG_CI_UDC
 235 #define CONFIG_USBD_HS
 236 #define CONFIG_USB_GADGET_DUALSPEED
 237
 238 #define CONFIG_USB_GADGET
 239 #define CONFIG_CMD_USB_MASS_STORAGE
 240 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 241 #define CONFIG_USB_GADGET_DOWNLOAD
 242 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 243
 244 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
 245 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
 246 #define CONFIG_G_DNL_MANUFACTURER       "FSL"
 247
 248 #define CONFIG_USB_FUNCTION_FASTBOOT
 249 #define CONFIG_CMD_FASTBOOT
 250 #define CONFIG_ANDROID_BOOT_IMAGE
 251 #define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
 252 #define CONFIG_FASTBOOT_BUF_SIZE   0x07000000
 253
 254 /* USB Device Firmware Update support */
 255 #define CONFIG_CMD_DFU
 256 #define CONFIG_USB_FUNCTION_DFU
 257 #define CONFIG_DFU_MMC
 258 #define CONFIG_DFU_SF
 259 #endif
 260
 261 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */