include/configs/mx6sabre_common.h

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX6QSABRE_COMMON_CONFIG_H
  10 #define __MX6QSABRE_COMMON_CONFIG_H
  11
  12 #define CONFIG_MX6
  13
  14 #include "mx6_common.h"
  15 #include <linux/sizes.h>
  16
  17 #define CONFIG_DISPLAY_CPUINFO
  18 #define CONFIG_DISPLAY_BOARDINFO
  19
  20 #include <asm/arch/imx-regs.h>
  21 #include <asm/imx-common/gpio.h>
  22
  23 #define CONFIG_CMDLINE_TAG
  24 #define CONFIG_SETUP_MEMORY_TAGS
  25 #define CONFIG_INITRD_TAG
  26 #define CONFIG_REVISION_TAG
  27
  28 #define CONFIG_DM
  29 #define CONFIG_DM_THERMAL
  30 #define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
  31 #define CONFIG_IMX6_THERMAL
  32
  33 #define CONFIG_SYS_GENERIC_BOARD
  34
  35 /* Size of malloc() pool */
  36 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  37
  38 #define CONFIG_BOARD_EARLY_INIT_F
  39 #define CONFIG_BOARD_LATE_INIT
  40 #define CONFIG_MXC_GPIO
  41
  42 #define CONFIG_MXC_UART
  43
  44 #define CONFIG_CMD_FUSE
  45 #if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
  46 #define CONFIG_MXC_OCOTP
  47 #endif
  48
  49 /* MMC Configs */
  50 #define CONFIG_FSL_ESDHC
  51 #define CONFIG_FSL_USDHC
  52 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  53
  54 #define CONFIG_MMC
  55 #define CONFIG_CMD_MMC
  56 #define CONFIG_GENERIC_MMC
  57 #define CONFIG_BOUNCE_BUFFER
  58 #define CONFIG_CMD_EXT2
  59 #define CONFIG_CMD_FAT
  60 #define CONFIG_DOS_PARTITION
  61
  62 #define CONFIG_CMD_PING
  63 #define CONFIG_CMD_DHCP
  64 #define CONFIG_CMD_MII
  65 #define CONFIG_CMD_NET
  66 #define CONFIG_FEC_MXC
  67 #define CONFIG_MII
  68 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  69 #define CONFIG_FEC_XCV_TYPE             RGMII
  70 #define CONFIG_ETHPRIME                 "FEC"
  71 #define CONFIG_FEC_MXC_PHYADDR          1
  72
  73 #define CONFIG_PHYLIB
  74 #define CONFIG_PHY_ATHEROS
  75
  76 #define CONFIG_CMD_SF
  77 #ifdef CONFIG_CMD_SF
  78 #define CONFIG_SPI_FLASH
  79 #define CONFIG_SPI_FLASH_STMICRO
  80 #define CONFIG_MXC_SPI
  81 #define CONFIG_SF_DEFAULT_BUS           0
  82 #define CONFIG_SF_DEFAULT_CS            0
  83 #define CONFIG_SF_DEFAULT_SPEED         20000000
  84 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  85 #endif
  86
  87 /* allow to overwrite serial and ethaddr */
  88 #define CONFIG_ENV_OVERWRITE
  89 #define CONFIG_CONS_INDEX              1
  90 #define CONFIG_BAUDRATE                        115200
  91
  92 /* Command definition */
  93 #include <config_cmd_default.h>
  94
  95 #define CONFIG_CMD_BMODE
  96 #define CONFIG_CMD_BOOTZ
  97 #define CONFIG_CMD_SETEXPR
  98 #undef CONFIG_CMD_IMLS
  99
 100 #define CONFIG_BOOTDELAY               1
 101
 102 #define CONFIG_LOADADDR                        0x12000000
 103 #define CONFIG_SYS_TEXT_BASE           0x17800000
 104
 105 #ifdef CONFIG_SUPPORT_EMMC_BOOT
 106 #define EMMC_ENV \
 107         "emmcdev=2\0" \
 108         "update_emmc_firmware=" \
 109                 "if test ${ip_dyn} = yes; then " \
 110                         "setenv get_cmd dhcp; " \
 111                 "else " \
 112                         "setenv get_cmd tftp; " \
 113                 "fi; " \
 114                 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 115                         "if mmc dev ${emmcdev} && " \
 116                                 "mmc open ${emmcdev} 1; then "  \
 117                                 "setexpr fw_sz ${filesize} / 0x200; " \
 118                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 119                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 120                                 "mmc close ${emmcdev} 1; " \
 121                         "fi; "  \
 122                 "fi\0"
 123 #else
 124 #define EMMC_ENV ""
 125 #endif
 126
 127 #define CONFIG_EXTRA_ENV_SETTINGS \
 128         "script=boot.scr\0" \
 129         "image=zImage\0" \
 130         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 131         "fdt_addr=0x18000000\0" \
 132         "boot_fdt=try\0" \
 133         "ip_dyn=yes\0" \
 134         "console=" CONFIG_CONSOLE_DEV "\0" \
 135         "fdt_high=0xffffffff\0"   \
 136         "initrd_high=0xffffffff\0" \
 137         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 138         "mmcpart=1\0" \
 139         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 140         "update_sd_firmware=" \
 141                 "if test ${ip_dyn} = yes; then " \
 142                         "setenv get_cmd dhcp; " \
 143                 "else " \
 144                         "setenv get_cmd tftp; " \
 145                 "fi; " \
 146                 "if mmc dev ${mmcdev}; then "   \
 147                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 148                                 "setexpr fw_sz ${filesize} / 0x200; " \
 149                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 150                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 151                         "fi; "  \
 152                 "fi\0" \
 153         EMMC_ENV          \
 154         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 155                 "root=${mmcroot}\0" \
 156         "loadbootscript=" \
 157                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 158         "bootscript=echo Running bootscript from mmc ...; " \
 159                 "source\0" \
 160         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 161         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 162         "mmcboot=echo Booting from mmc ...; " \
 163                 "run mmcargs; " \
 164                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 165                         "if run loadfdt; then " \
 166                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 167                         "else " \
 168                                 "if test ${boot_fdt} = try; then " \
 169                                         "bootz; " \
 170                                 "else " \
 171                                         "echo WARN: Cannot load the DT; " \
 172                                 "fi; " \
 173                         "fi; " \
 174                 "else " \
 175                         "bootz; " \
 176                 "fi;\0" \
 177         "netargs=setenv bootargs console=${console},${baudrate} " \
 178                 "root=/dev/nfs " \
 179                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 180         "netboot=echo Booting from net ...; " \
 181                 "run netargs; " \
 182                 "if test ${ip_dyn} = yes; then " \
 183                         "setenv get_cmd dhcp; " \
 184                 "else " \
 185                         "setenv get_cmd tftp; " \
 186                 "fi; " \
 187                 "${get_cmd} ${image}; " \
 188                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 189                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 190                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 191                         "else " \
 192                                 "if test ${boot_fdt} = try; then " \
 193                                         "bootz; " \
 194                                 "else " \
 195                                         "echo WARN: Cannot load the DT; " \
 196                                 "fi; " \
 197                         "fi; " \
 198                 "else " \
 199                         "bootz; " \
 200                 "fi;\0"
 201
 202 #define CONFIG_BOOTCOMMAND \
 203         "mmc dev ${mmcdev};" \
 204         "if mmc rescan; then " \
 205                 "if run loadbootscript; then " \
 206                 "run bootscript; " \
 207                 "else " \
 208                         "if run loadimage; then " \
 209                                 "run mmcboot; " \
 210                         "else run netboot; " \
 211                         "fi; " \
 212                 "fi; " \
 213         "else run netboot; fi"
 214
 215 #define CONFIG_ARP_TIMEOUT     200UL
 216
 217 /* Miscellaneous configurable options */
 218 #define CONFIG_SYS_LONGHELP
 219 #define CONFIG_SYS_HUSH_PARSER
 220 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 221 #define CONFIG_AUTO_COMPLETE
 222 #define CONFIG_SYS_CBSIZE              256
 223 #define CONFIG_SYS_MAXARGS             16
 224 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 225
 226 #define CONFIG_SYS_MEMTEST_START       0x10000000
 227 #define CONFIG_SYS_MEMTEST_END         0x10010000
 228 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 229
 230 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 231
 232 #define CONFIG_CMDLINE_EDITING
 233 #define CONFIG_STACKSIZE               (128 * 1024)
 234
 235 /* Physical Memory Map */
 236 #define CONFIG_NR_DRAM_BANKS           1
 237 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 238
 239 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 240 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 241 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 242
 243 #define CONFIG_SYS_INIT_SP_OFFSET \
 244         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 245 #define CONFIG_SYS_INIT_SP_ADDR \
 246         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 247
 248 /* FLASH and environment organization */
 249 #define CONFIG_SYS_NO_FLASH
 250
 251 #define CONFIG_ENV_SIZE                 (8 * 1024)
 252
 253 #define CONFIG_ENV_IS_IN_MMC
 254
 255 #if defined(CONFIG_ENV_IS_IN_MMC)
 256 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 257 #endif
 258
 259 #define CONFIG_OF_LIBFDT
 260
 261 #ifndef CONFIG_SYS_DCACHE_OFF
 262 #define CONFIG_CMD_CACHE
 263 #endif
 264
 265 /* Framebuffer */
 266 #define CONFIG_VIDEO
 267 #define CONFIG_VIDEO_IPUV3
 268 #define CONFIG_CFB_CONSOLE
 269 #define CONFIG_VGA_AS_SINGLE_DEVICE
 270 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 271 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 272 #define CONFIG_VIDEO_BMP_RLE8
 273 #define CONFIG_SPLASH_SCREEN
 274 #define CONFIG_SPLASH_SCREEN_ALIGN
 275 #define CONFIG_BMP_16BPP
 276 #define CONFIG_VIDEO_LOGO
 277 #define CONFIG_VIDEO_BMP_LOGO
 278 #define CONFIG_IPUV3_CLK 260000000
 279 #define CONFIG_IMX_HDMI
 280 #define CONFIG_IMX_VIDEO_SKIP
 281
 282 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */