include/configs/mx6sabre_common.h

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX6QSABRE_COMMON_CONFIG_H
  10 #define __MX6QSABRE_COMMON_CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define CONFIG_CMDLINE_TAG
  15 #define CONFIG_SETUP_MEMORY_TAGS
  16 #define CONFIG_INITRD_TAG
  17 #define CONFIG_REVISION_TAG
  18
  19 #define CONFIG_IMX6_THERMAL
  20
  21 /* Size of malloc() pool */
  22 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  23
  24 #define CONFIG_BOARD_EARLY_INIT_F
  25 #define CONFIG_BOARD_LATE_INIT
  26 #define CONFIG_MXC_GPIO
  27
  28 #define CONFIG_MXC_UART
  29
  30 #define CONFIG_CMD_FUSE
  31 #if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
  32 #define CONFIG_MXC_OCOTP
  33 #endif
  34
  35 /* MMC Configs */
  36 #define CONFIG_FSL_ESDHC
  37 #define CONFIG_FSL_USDHC
  38 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  39
  40 #define CONFIG_MMC
  41 #define CONFIG_CMD_MMC
  42 #define CONFIG_GENERIC_MMC
  43 #define CONFIG_BOUNCE_BUFFER
  44 #define CONFIG_CMD_EXT2
  45 #define CONFIG_CMD_EXT4
  46 #define CONFIG_CMD_EXT4_WRITE
  47 #define CONFIG_CMD_FAT
  48 #define CONFIG_DOS_PARTITION
  49
  50 #define CONFIG_CMD_PING
  51 #define CONFIG_CMD_DHCP
  52 #define CONFIG_CMD_MII
  53 #define CONFIG_CMD_NET
  54 #define CONFIG_FEC_MXC
  55 #define CONFIG_MII
  56 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  57 #define CONFIG_FEC_XCV_TYPE             RGMII
  58 #define CONFIG_ETHPRIME                 "FEC"
  59 #define CONFIG_FEC_MXC_PHYADDR          1
  60
  61 #define CONFIG_PHYLIB
  62 #define CONFIG_PHY_ATHEROS
  63
  64 #define CONFIG_CMD_SF
  65 #ifdef CONFIG_CMD_SF
  66 #define CONFIG_SPI_FLASH
  67 #define CONFIG_SPI_FLASH_STMICRO
  68 #define CONFIG_MXC_SPI
  69 #define CONFIG_SF_DEFAULT_BUS           0
  70 #define CONFIG_SF_DEFAULT_CS            0
  71 #define CONFIG_SF_DEFAULT_SPEED         20000000
  72 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  73 #endif
  74
  75 /* allow to overwrite serial and ethaddr */
  76 #define CONFIG_ENV_OVERWRITE
  77 #define CONFIG_CONS_INDEX              1
  78 #define CONFIG_BAUDRATE                        115200
  79
  80 /* Command definition */
  81 #define CONFIG_CMD_BMODE
  82 #define CONFIG_CMD_BOOTZ
  83 #define CONFIG_CMD_SETEXPR
  84
  85 #define CONFIG_BOOTDELAY               1
  86
  87 #define CONFIG_LOADADDR                        0x12000000
  88 #define CONFIG_SYS_TEXT_BASE           0x17800000
  89
  90 #ifdef CONFIG_SUPPORT_EMMC_BOOT
  91 #define EMMC_ENV \
  92         "emmcdev=2\0" \
  93         "update_emmc_firmware=" \
  94                 "if test ${ip_dyn} = yes; then " \
  95                         "setenv get_cmd dhcp; " \
  96                 "else " \
  97                         "setenv get_cmd tftp; " \
  98                 "fi; " \
  99                 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 100                         "if mmc dev ${emmcdev} 1; then "        \
 101                                 "setexpr fw_sz ${filesize} / 0x200; " \
 102                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 103                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 104                         "fi; "  \
 105                 "fi\0"
 106 #else
 107 #define EMMC_ENV ""
 108 #endif
 109
 110 #define CONFIG_EXTRA_ENV_SETTINGS \
 111         "script=boot.scr\0" \
 112         "image=zImage\0" \
 113         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 114         "fdt_addr=0x18000000\0" \
 115         "boot_fdt=try\0" \
 116         "ip_dyn=yes\0" \
 117         "console=" CONFIG_CONSOLE_DEV "\0" \
 118         "fdt_high=0xffffffff\0"   \
 119         "initrd_high=0xffffffff\0" \
 120         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 121         "mmcpart=1\0" \
 122         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 123         "update_sd_firmware=" \
 124                 "if test ${ip_dyn} = yes; then " \
 125                         "setenv get_cmd dhcp; " \
 126                 "else " \
 127                         "setenv get_cmd tftp; " \
 128                 "fi; " \
 129                 "if mmc dev ${mmcdev}; then "   \
 130                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 131                                 "setexpr fw_sz ${filesize} / 0x200; " \
 132                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 133                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 134                         "fi; "  \
 135                 "fi\0" \
 136         EMMC_ENV          \
 137         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 138                 "root=${mmcroot}\0" \
 139         "loadbootscript=" \
 140                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 141         "bootscript=echo Running bootscript from mmc ...; " \
 142                 "source\0" \
 143         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 144         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 145         "mmcboot=echo Booting from mmc ...; " \
 146                 "run mmcargs; " \
 147                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 148                         "if run loadfdt; then " \
 149                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 150                         "else " \
 151                                 "if test ${boot_fdt} = try; then " \
 152                                         "bootz; " \
 153                                 "else " \
 154                                         "echo WARN: Cannot load the DT; " \
 155                                 "fi; " \
 156                         "fi; " \
 157                 "else " \
 158                         "bootz; " \
 159                 "fi;\0" \
 160         "netargs=setenv bootargs console=${console},${baudrate} " \
 161                 "root=/dev/nfs " \
 162                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 163         "netboot=echo Booting from net ...; " \
 164                 "run netargs; " \
 165                 "if test ${ip_dyn} = yes; then " \
 166                         "setenv get_cmd dhcp; " \
 167                 "else " \
 168                         "setenv get_cmd tftp; " \
 169                 "fi; " \
 170                 "${get_cmd} ${image}; " \
 171                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 172                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 173                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 174                         "else " \
 175                                 "if test ${boot_fdt} = try; then " \
 176                                         "bootz; " \
 177                                 "else " \
 178                                         "echo WARN: Cannot load the DT; " \
 179                                 "fi; " \
 180                         "fi; " \
 181                 "else " \
 182                         "bootz; " \
 183                 "fi;\0"
 184
 185 #define CONFIG_BOOTCOMMAND \
 186         "mmc dev ${mmcdev};" \
 187         "if mmc rescan; then " \
 188                 "if run loadbootscript; then " \
 189                 "run bootscript; " \
 190                 "else " \
 191                         "if run loadimage; then " \
 192                                 "run mmcboot; " \
 193                         "else run netboot; " \
 194                         "fi; " \
 195                 "fi; " \
 196         "else run netboot; fi"
 197
 198 #define CONFIG_ARP_TIMEOUT     200UL
 199
 200 /* Miscellaneous configurable options */
 201 #define CONFIG_SYS_LONGHELP
 202 #define CONFIG_SYS_HUSH_PARSER
 203 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 204 #define CONFIG_AUTO_COMPLETE
 205 #define CONFIG_SYS_CBSIZE              256
 206 #define CONFIG_SYS_MAXARGS             16
 207 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 208
 209 #define CONFIG_SYS_MEMTEST_START       0x10000000
 210 #define CONFIG_SYS_MEMTEST_END         0x10010000
 211 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 212
 213 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 214
 215 #define CONFIG_CMDLINE_EDITING
 216 #define CONFIG_STACKSIZE               (128 * 1024)
 217
 218 /* Physical Memory Map */
 219 #define CONFIG_NR_DRAM_BANKS           1
 220 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 221
 222 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 223 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 224 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 225
 226 #define CONFIG_SYS_INIT_SP_OFFSET \
 227         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 228 #define CONFIG_SYS_INIT_SP_ADDR \
 229         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 230
 231 /* Environment organization */
 232 #define CONFIG_ENV_SIZE                 (8 * 1024)
 233
 234 #define CONFIG_ENV_IS_IN_MMC
 235
 236 #if defined(CONFIG_ENV_IS_IN_MMC)
 237 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 238 #endif
 239
 240 #define CONFIG_OF_LIBFDT
 241
 242 #ifndef CONFIG_SYS_DCACHE_OFF
 243 #define CONFIG_CMD_CACHE
 244 #endif
 245
 246 /* Framebuffer */
 247 #define CONFIG_VIDEO
 248 #define CONFIG_VIDEO_IPUV3
 249 #define CONFIG_CFB_CONSOLE
 250 #define CONFIG_VGA_AS_SINGLE_DEVICE
 251 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 252 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 253 #define CONFIG_VIDEO_BMP_RLE8
 254 #define CONFIG_SPLASH_SCREEN
 255 #define CONFIG_SPLASH_SCREEN_ALIGN
 256 #define CONFIG_BMP_16BPP
 257 #define CONFIG_VIDEO_LOGO
 258 #define CONFIG_VIDEO_BMP_LOGO
 259 #define CONFIG_IPUV3_CLK 260000000
 260 #define CONFIG_IMX_HDMI
 261 #define CONFIG_IMX_VIDEO_SKIP
 262
 263 #ifndef CONFIG_SPL
 264 #define CONFIG_CI_UDC
 265 #define CONFIG_USBD_HS
 266 #define CONFIG_USB_GADGET_DUALSPEED
 267
 268 #define CONFIG_USB_GADGET
 269 #define CONFIG_CMD_USB_MASS_STORAGE
 270 #define CONFIG_USB_GADGET_MASS_STORAGE
 271 #define CONFIG_USBDOWNLOAD_GADGET
 272 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 273
 274 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
 275 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
 276 #define CONFIG_G_DNL_MANUFACTURER       "FSL"
 277 #endif
 278
 279 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */