include/configs/mx6sabre_common.h

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX6QSABRE_COMMON_CONFIG_H
  10 #define __MX6QSABRE_COMMON_CONFIG_H
  11
  12 #define CONFIG_MX6
  13
  14 #include "mx6_common.h"
  15 #include <linux/sizes.h>
  16
  17 #define CONFIG_DISPLAY_CPUINFO
  18 #define CONFIG_DISPLAY_BOARDINFO
  19
  20 #include <asm/arch/imx-regs.h>
  21 #include <asm/imx-common/gpio.h>
  22
  23 #define CONFIG_CMDLINE_TAG
  24 #define CONFIG_SETUP_MEMORY_TAGS
  25 #define CONFIG_INITRD_TAG
  26 #define CONFIG_REVISION_TAG
  27
  28 #define CONFIG_IMX6_THERMAL
  29
  30 #define CONFIG_SYS_GENERIC_BOARD
  31
  32 /* Size of malloc() pool */
  33 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  34
  35 #define CONFIG_BOARD_EARLY_INIT_F
  36 #define CONFIG_BOARD_LATE_INIT
  37 #define CONFIG_MXC_GPIO
  38
  39 #define CONFIG_MXC_UART
  40
  41 #define CONFIG_CMD_FUSE
  42 #if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL)
  43 #define CONFIG_MXC_OCOTP
  44 #endif
  45
  46 /* MMC Configs */
  47 #define CONFIG_FSL_ESDHC
  48 #define CONFIG_FSL_USDHC
  49 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  50
  51 #define CONFIG_MMC
  52 #define CONFIG_CMD_MMC
  53 #define CONFIG_GENERIC_MMC
  54 #define CONFIG_BOUNCE_BUFFER
  55 #define CONFIG_CMD_EXT2
  56 #define CONFIG_CMD_FAT
  57 #define CONFIG_DOS_PARTITION
  58
  59 #define CONFIG_CMD_PING
  60 #define CONFIG_CMD_DHCP
  61 #define CONFIG_CMD_MII
  62 #define CONFIG_CMD_NET
  63 #define CONFIG_FEC_MXC
  64 #define CONFIG_MII
  65 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  66 #define CONFIG_FEC_XCV_TYPE             RGMII
  67 #define CONFIG_ETHPRIME                 "FEC"
  68 #define CONFIG_FEC_MXC_PHYADDR          1
  69
  70 #define CONFIG_PHYLIB
  71 #define CONFIG_PHY_ATHEROS
  72
  73 #define CONFIG_CMD_SF
  74 #ifdef CONFIG_CMD_SF
  75 #define CONFIG_SPI_FLASH
  76 #define CONFIG_SPI_FLASH_STMICRO
  77 #define CONFIG_MXC_SPI
  78 #define CONFIG_SF_DEFAULT_BUS           0
  79 #define CONFIG_SF_DEFAULT_CS            0
  80 #define CONFIG_SF_DEFAULT_SPEED         20000000
  81 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  82 #endif
  83
  84 /* allow to overwrite serial and ethaddr */
  85 #define CONFIG_ENV_OVERWRITE
  86 #define CONFIG_CONS_INDEX              1
  87 #define CONFIG_BAUDRATE                        115200
  88
  89 /* Command definition */
  90 #include <config_cmd_default.h>
  91
  92 #define CONFIG_CMD_BMODE
  93 #define CONFIG_CMD_BOOTZ
  94 #define CONFIG_CMD_SETEXPR
  95 #undef CONFIG_CMD_IMLS
  96
  97 #define CONFIG_BOOTDELAY               1
  98
  99 #define CONFIG_LOADADDR                        0x12000000
 100 #define CONFIG_SYS_TEXT_BASE           0x17800000
 101
 102 #ifdef CONFIG_SUPPORT_EMMC_BOOT
 103 #define EMMC_ENV \
 104         "emmcdev=2\0" \
 105         "update_emmc_firmware=" \
 106                 "if test ${ip_dyn} = yes; then " \
 107                         "setenv get_cmd dhcp; " \
 108                 "else " \
 109                         "setenv get_cmd tftp; " \
 110                 "fi; " \
 111                 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 112                         "if mmc dev ${emmcdev} && " \
 113                                 "mmc open ${emmcdev} 1; then "  \
 114                                 "setexpr fw_sz ${filesize} / 0x200; " \
 115                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 116                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 117                                 "mmc close ${emmcdev} 1; " \
 118                         "fi; "  \
 119                 "fi\0"
 120 #else
 121 #define EMMC_ENV ""
 122 #endif
 123
 124 #define CONFIG_EXTRA_ENV_SETTINGS \
 125         "script=boot.scr\0" \
 126         "image=zImage\0" \
 127         "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 128         "fdt_addr=0x18000000\0" \
 129         "boot_fdt=try\0" \
 130         "ip_dyn=yes\0" \
 131         "console=" CONFIG_CONSOLE_DEV "\0" \
 132         "fdt_high=0xffffffff\0"   \
 133         "initrd_high=0xffffffff\0" \
 134         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 135         "mmcpart=1\0" \
 136         "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
 137         "update_sd_firmware=" \
 138                 "if test ${ip_dyn} = yes; then " \
 139                         "setenv get_cmd dhcp; " \
 140                 "else " \
 141                         "setenv get_cmd tftp; " \
 142                 "fi; " \
 143                 "if mmc dev ${mmcdev}; then "   \
 144                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 145                                 "setexpr fw_sz ${filesize} / 0x200; " \
 146                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 147                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 148                         "fi; "  \
 149                 "fi\0" \
 150         EMMC_ENV          \
 151         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 152                 "root=${mmcroot}\0" \
 153         "loadbootscript=" \
 154                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 155         "bootscript=echo Running bootscript from mmc ...; " \
 156                 "source\0" \
 157         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 158         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 159         "mmcboot=echo Booting from mmc ...; " \
 160                 "run mmcargs; " \
 161                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 162                         "if run loadfdt; then " \
 163                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 164                         "else " \
 165                                 "if test ${boot_fdt} = try; then " \
 166                                         "bootz; " \
 167                                 "else " \
 168                                         "echo WARN: Cannot load the DT; " \
 169                                 "fi; " \
 170                         "fi; " \
 171                 "else " \
 172                         "bootz; " \
 173                 "fi;\0" \
 174         "netargs=setenv bootargs console=${console},${baudrate} " \
 175                 "root=/dev/nfs " \
 176                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 177         "netboot=echo Booting from net ...; " \
 178                 "run netargs; " \
 179                 "if test ${ip_dyn} = yes; then " \
 180                         "setenv get_cmd dhcp; " \
 181                 "else " \
 182                         "setenv get_cmd tftp; " \
 183                 "fi; " \
 184                 "${get_cmd} ${image}; " \
 185                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 186                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 187                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 188                         "else " \
 189                                 "if test ${boot_fdt} = try; then " \
 190                                         "bootz; " \
 191                                 "else " \
 192                                         "echo WARN: Cannot load the DT; " \
 193                                 "fi; " \
 194                         "fi; " \
 195                 "else " \
 196                         "bootz; " \
 197                 "fi;\0"
 198
 199 #define CONFIG_BOOTCOMMAND \
 200         "mmc dev ${mmcdev};" \
 201         "if mmc rescan; then " \
 202                 "if run loadbootscript; then " \
 203                 "run bootscript; " \
 204                 "else " \
 205                         "if run loadimage; then " \
 206                                 "run mmcboot; " \
 207                         "else run netboot; " \
 208                         "fi; " \
 209                 "fi; " \
 210         "else run netboot; fi"
 211
 212 #define CONFIG_ARP_TIMEOUT     200UL
 213
 214 /* Miscellaneous configurable options */
 215 #define CONFIG_SYS_LONGHELP
 216 #define CONFIG_SYS_HUSH_PARSER
 217 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
 218 #define CONFIG_AUTO_COMPLETE
 219 #define CONFIG_SYS_CBSIZE              256
 220 #define CONFIG_SYS_MAXARGS             16
 221 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 222
 223 #define CONFIG_SYS_MEMTEST_START       0x10000000
 224 #define CONFIG_SYS_MEMTEST_END         0x10010000
 225 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 226
 227 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 228
 229 #define CONFIG_CMDLINE_EDITING
 230 #define CONFIG_STACKSIZE               (128 * 1024)
 231
 232 /* Physical Memory Map */
 233 #define CONFIG_NR_DRAM_BANKS           1
 234 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 235
 236 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 237 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 238 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 239
 240 #define CONFIG_SYS_INIT_SP_OFFSET \
 241         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 242 #define CONFIG_SYS_INIT_SP_ADDR \
 243         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 244
 245 /* FLASH and environment organization */
 246 #define CONFIG_SYS_NO_FLASH
 247
 248 #define CONFIG_ENV_SIZE                 (8 * 1024)
 249
 250 #define CONFIG_ENV_IS_IN_MMC
 251
 252 #if defined(CONFIG_ENV_IS_IN_MMC)
 253 #define CONFIG_ENV_OFFSET               (8 * 64 * 1024)
 254 #endif
 255
 256 #define CONFIG_OF_LIBFDT
 257
 258 #ifndef CONFIG_SYS_DCACHE_OFF
 259 #define CONFIG_CMD_CACHE
 260 #endif
 261
 262 /* Framebuffer */
 263 #define CONFIG_VIDEO
 264 #define CONFIG_VIDEO_IPUV3
 265 #define CONFIG_CFB_CONSOLE
 266 #define CONFIG_VGA_AS_SINGLE_DEVICE
 267 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 268 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 269 #define CONFIG_VIDEO_BMP_RLE8
 270 #define CONFIG_SPLASH_SCREEN
 271 #define CONFIG_SPLASH_SCREEN_ALIGN
 272 #define CONFIG_BMP_16BPP
 273 #define CONFIG_VIDEO_LOGO
 274 #define CONFIG_VIDEO_BMP_LOGO
 275 #define CONFIG_IPUV3_CLK 260000000
 276 #define CONFIG_IMX_HDMI
 277 #define CONFIG_IMX_VIDEO_SKIP
 278
 279 #endif                         /* __MX6QSABRE_COMMON_CONFIG_H */