include/configs/mx6sabresd.h

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX6QSABRESD_CONFIG_H
  10 #define __MX6QSABRESD_CONFIG_H
  11
  12 #include <asm/arch/imx-regs.h>
  13 #include <asm/imx-common/gpio.h>
  14
  15 #ifdef CONFIG_SPL
  16 #define CONFIG_SPL_LIBCOMMON_SUPPORT
  17 #define CONFIG_SPL_MMC_SUPPORT
  18 #include "imx6_spl.h"
  19 #endif
  20
  21 #define CONFIG_MACH_TYPE        3980
  22 #define CONFIG_MXC_UART_BASE    UART1_BASE
  23 #define CONFIG_CONSOLE_DEV              "ttymxc0"
  24 #define CONFIG_MMCROOT                  "/dev/mmcblk1p2"
  25 #if defined(CONFIG_MX6Q)
  26 #define CONFIG_DEFAULT_FDT_FILE "imx6q-sabresd.dtb"
  27 #elif defined(CONFIG_MX6DL)
  28 #define CONFIG_DEFAULT_FDT_FILE "imx6dl-sabresd.dtb"
  29 #endif
  30 #define PHYS_SDRAM_SIZE         (1u * 1024 * 1024 * 1024)
  31
  32 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
  33
  34 #include "mx6sabre_common.h"
  35
  36 #define CONFIG_SYS_FSL_USDHC_NUM        3
  37 #if defined(CONFIG_ENV_IS_IN_MMC)
  38 #define CONFIG_SYS_MMC_ENV_DEV          1       /* SDHC3 */
  39 #endif
  40
  41 #define CONFIG_CMD_PCI
  42 #ifdef CONFIG_CMD_PCI
  43 #define CONFIG_PCI
  44 #define CONFIG_PCI_PNP
  45 #define CONFIG_PCI_SCAN_SHOW
  46 #define CONFIG_PCIE_IMX
  47 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
  48 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(3, 19)
  49 #endif
  50
  51 /* I2C Configs */
  52 #define CONFIG_CMD_I2C
  53 #define CONFIG_SYS_I2C
  54 #define CONFIG_SYS_I2C_MXC
  55 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  56 #define CONFIG_SYS_I2C_SPEED              100000
  57
  58 /* PMIC */
  59 #define CONFIG_POWER
  60 #define CONFIG_POWER_I2C
  61 #define CONFIG_POWER_PFUZE100
  62 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  63
  64 /* USB Configs */
  65 #define CONFIG_CMD_USB
  66 #ifdef CONFIG_CMD_USB
  67 #define CONFIG_USB_EHCI
  68 #define CONFIG_USB_EHCI_MX6
  69 #define CONFIG_USB_STORAGE
  70 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  71 #define CONFIG_USB_HOST_ETHER
  72 #define CONFIG_USB_ETHER_ASIX
  73 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  74 #define CONFIG_MXC_USB_FLAGS            0
  75 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Enabled USB controller number */
  76 #endif
  77
  78 #endif                         /* __MX6QSABRESD_CONFIG_H */