include/configs/mx6sabresd.h

   1 /*
   2  * Copyright (C) 2012 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q SabreSD board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __MX6QSABRESD_CONFIG_H
  10 #define __MX6QSABRESD_CONFIG_H
  11
  12 #ifdef CONFIG_SPL
  13 #include "imx6_spl.h"
  14 #endif
  15
  16 #define CONFIG_MACH_TYPE        3980
  17 #define CONFIG_MXC_UART_BASE    UART1_BASE
  18 #define CONSOLE_DEV             "ttymxc0"
  19 #define CONFIG_MMCROOT                  "/dev/mmcblk1p2"
  20
  21 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
  22
  23 #include "mx6sabre_common.h"
  24
  25 #define CONFIG_SYS_FSL_USDHC_NUM        3
  26 #if defined(CONFIG_ENV_IS_IN_MMC)
  27 #define CONFIG_SYS_MMC_ENV_DEV          1       /* SDHC3 */
  28 #endif
  29
  30 #define CONFIG_CMD_PCI
  31 #ifdef CONFIG_CMD_PCI
  32 #define CONFIG_PCI_SCAN_SHOW
  33 #define CONFIG_PCIE_IMX
  34 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
  35 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(3, 19)
  36 #endif
  37
  38 /* I2C Configs */
  39 #define CONFIG_SYS_I2C
  40 #define CONFIG_SYS_I2C_MXC
  41 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  42 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  43 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  44 #define CONFIG_SYS_I2C_SPEED              100000
  45
  46 /* PMIC */
  47 #define CONFIG_POWER
  48 #define CONFIG_POWER_I2C
  49 #define CONFIG_POWER_PFUZE100
  50 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
  51
  52 /* USB Configs */
  53 #ifdef CONFIG_CMD_USB
  54 #define CONFIG_USB_EHCI
  55 #define CONFIG_USB_EHCI_MX6
  56 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  57 #define CONFIG_USB_HOST_ETHER
  58 #define CONFIG_USB_ETHER_ASIX
  59 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  60 #define CONFIG_MXC_USB_FLAGS            0
  61 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Enabled USB controller number */
  62 #endif
  63
  64 #endif                         /* __MX6QSABRESD_CONFIG_H */