include/configs/nas220.h

   1 /*
   2  * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
   3  *
   4  * based on work from:
   5  * (C) Copyright 2009
   6  * Marvell Semiconductor <www.marvell.com>
   7  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef _CONFIG_NAS220_H
  13 #define _CONFIG_NAS220_H
  14
  15 /*
  16  * Machine type ID
  17  */
  18 #define CONFIG_MACH_TYPE                MACH_TYPE_RD88F6192_NAS
  19
  20 /*
  21  * High Level Configuration Options (easy to change)
  22  */
  23 #define CONFIG_FEROCEON_88FR131         /* #define CPU Core subversion */
  24 #define CONFIG_KW88F6192                /* SOC Name */
  25 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  26
  27 /* power-on led, regulator, sata0, sata1 */
  28 #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))
  29 #define NAS220_GE_OE_VAL_HIGH (0)
  30 #define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)))
  31 #define NAS220_GE_OE_HIGH (~(0))
  32
  33 /* PHY related */
  34 #define MV88E1116_LED_FCTRL_REG         10
  35 #define MV88E1116_CPRSP_CR3_REG         21
  36 #define MV88E1116_MAC_CTRL_REG          21
  37 #define MV88E1116_PGADR_REG             22
  38 #define MV88E1116_RGMII_TXTM_CTRL       (1 << 4)
  39 #define MV88E1116_RGMII_RXTM_CTRL       (1 << 5)
  40
  41 /*
  42  * Commands configuration
  43  */
  44 #define CONFIG_CMD_NAND
  45 #define CONFIG_SYS_LONGHELP
  46 #define CONFIG_AUTO_COMPLETE
  47 #define CONFIG_CMDLINE_EDITING
  48
  49 /*
  50  * mv-common.h should be defined after CMD configs since it used them
  51  * to enable certain macros
  52  */
  53 #include "mv-common.h"
  54
  55 /*
  56  *  Environment variables configurations
  57  */
  58 #ifdef CONFIG_CMD_NAND
  59 #define CONFIG_ENV_SECT_SIZE 0x10000
  60 #endif
  61
  62 #define CONFIG_ENV_SIZE 0x10000
  63 #define CONFIG_ENV_OFFSET 0xa0000
  64
  65 /*
  66  * Default environment variables
  67  */
  68 #define CONFIG_BOOTCOMMAND ""
  69
  70 #define CONFIG_EXTRA_ENV_SETTINGS \
  71         "bootargs=console=ttyS0,115200\0" \
  72         "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\
  73         "0x010000@0xa0000(env),"\
  74         "0x500000@0xc0000(uimage),"\
  75         "0x1a40000@0x5c0000(rootfs)\0" \
  76         "mtdids=nand0=orion_nand\0"\
  77         "bootdelay=-1\0"\
  78         "autostart=no\0"\
  79         "autoload=no\0"
  80
  81 /*
  82  * Ethernet Driver configuration
  83  */
  84 #ifdef CONFIG_CMD_NET
  85 #define CONFIG_MVGBE_PORTS {1, 0}       /* enable port 0 only */
  86 #define CONFIG_PHY_BASE_ADR 8
  87 #endif /* CONFIG_CMD_NET */
  88
  89 /*
  90  * USB/EHCI
  91  */
  92 #ifdef CONFIG_CMD_USB
  93 #define CONFIG_USB_EHCI_KIRKWOOD        /* on Kirkwood platform */
  94 #define CONFIG_EHCI_IS_TDI
  95 #define CONFIG_SUPPORT_VFAT
  96 #endif /* CONFIG_CMD_USB */
  97
  98 /*
  99  * File system
 100  */
 101 #define CONFIG_JFFS2_NAND
 102 #define CONFIG_JFFS2_LZO
 103 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 104 #define CONFIG_MTD_PARTITIONS
 105
 106 /*
 107  * SATA
 108  */
 109 #ifdef CONFIG_MVSATA_IDE
 110 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 111 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
 112 #endif
 113
 114 /*
 115  * EFI partition
 116  */
 117
 118 /*
 119  *  Date Time
 120  */
 121 #ifdef CONFIG_CMD_DATE
 122 #define CONFIG_RTC_MV
 123 #endif /* CONFIG_CMD_DATE */
 124
 125 #define CONFIG_KIRKWOOD_GPIO
 126
 127 #endif /* _CONFIG_NAS220_H */
 128