include/configs/nas220.h

   1 /*
   2  * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
   3  *
   4  * based on work from:
   5  * (C) Copyright 2009
   6  * Marvell Semiconductor <www.marvell.com>
   7  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef _CONFIG_NAS220_H
  13 #define _CONFIG_NAS220_H
  14
  15 /*
  16  * Machine type ID
  17  */
  18 #define CONFIG_MACH_TYPE                MACH_TYPE_RD88F6192_NAS
  19
  20 /*
  21  * High Level Configuration Options (easy to change)
  22  */
  23 #define CONFIG_FEROCEON_88FR131         /* #define CPU Core subversion */
  24 #define CONFIG_KW88F6192                /* SOC Name */
  25 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  26
  27 /* power-on led, regulator, sata0, sata1 */
  28 #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))
  29 #define NAS220_GE_OE_VAL_HIGH (0)
  30 #define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)))
  31 #define NAS220_GE_OE_HIGH (~(0))
  32
  33 /* PHY related */
  34 #define MV88E1116_LED_FCTRL_REG         10
  35 #define MV88E1116_CPRSP_CR3_REG         21
  36 #define MV88E1116_MAC_CTRL_REG          21
  37 #define MV88E1116_PGADR_REG             22
  38 #define MV88E1116_RGMII_TXTM_CTRL       (1 << 4)
  39 #define MV88E1116_RGMII_RXTM_CTRL       (1 << 5)
  40
  41 /*
  42  * Commands configuration
  43  */
  44 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  45 #define CONFIG_CMD_NAND
  46 #define CONFIG_CMD_DATE
  47 #define CONFIG_CMD_IDE
  48 #define CONFIG_SYS_LONGHELP
  49 #define CONFIG_AUTO_COMPLETE
  50 #define CONFIG_CMDLINE_EDITING
  51
  52 /*
  53  * mv-common.h should be defined after CMD configs since it used them
  54  * to enable certain macros
  55  */
  56 #include "mv-common.h"
  57
  58 /*
  59  *  Environment variables configurations
  60  */
  61 #ifdef CONFIG_CMD_NAND
  62 #define CONFIG_ENV_IS_IN_NAND
  63 #define CONFIG_ENV_SECT_SIZE 0x10000
  64 #else
  65 #define CONFIG_ENV_IS_NOWHERE
  66 #endif
  67
  68 #define CONFIG_ENV_SIZE 0x10000
  69 #define CONFIG_ENV_OFFSET 0xa0000
  70
  71 /*
  72  * Default environment variables
  73  */
  74 #define CONFIG_BOOTCOMMAND ""
  75
  76 #define CONFIG_EXTRA_ENV_SETTINGS \
  77         "bootargs=console=ttyS0,115200\0" \
  78         "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\
  79         "0x010000@0xa0000(env),"\
  80         "0x500000@0xc0000(uimage),"\
  81         "0x1a40000@0x5c0000(rootfs)\0" \
  82         "mtdids=nand0=orion_nand\0"\
  83         "bootdelay=-1\0"\
  84         "autostart=no\0"\
  85         "autoload=no\0"
  86
  87 /*
  88  * Ethernet Driver configuration
  89  */
  90 #ifdef CONFIG_CMD_NET
  91 #define CONFIG_MVGBE_PORTS {1, 0}       /* enable port 0 only */
  92 #define CONFIG_PHY_BASE_ADR 8
  93 #endif /* CONFIG_CMD_NET */
  94
  95 /*
  96  * USB/EHCI
  97  */
  98 #ifdef CONFIG_CMD_USB
  99 #define CONFIG_USB_EHCI                 /* Enable EHCI USB support */
 100 #define CONFIG_USB_EHCI_KIRKWOOD        /* on Kirkwood platform */
 101 #define CONFIG_EHCI_IS_TDI
 102 #define CONFIG_SUPPORT_VFAT
 103 #endif /* CONFIG_CMD_USB */
 104
 105 /*
 106  * File system
 107  */
 108 #define CONFIG_CMD_JFFS2
 109 #define CONFIG_JFFS2_NAND
 110 #define CONFIG_JFFS2_LZO
 111 #define CONFIG_CMD_UBIFS
 112 #define CONFIG_RBTREE
 113 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 114 #define CONFIG_MTD_PARTITIONS
 115 #define CONFIG_CMD_MTDPARTS
 116 #define CONFIG_LZO
 117
 118 /*
 119  * SATA
 120  */
 121 #ifdef CONFIG_MVSATA_IDE
 122 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 123 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
 124 #endif
 125
 126 /*
 127  * EFI partition
 128  */
 129
 130 /*
 131  *  Date Time
 132  */
 133 #ifdef CONFIG_CMD_DATE
 134 #define CONFIG_RTC_MV
 135 #endif /* CONFIG_CMD_DATE */
 136
 137 #define CONFIG_KIRKWOOD_GPIO
 138
 139 #endif /* _CONFIG_NAS220_H */
 140