]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/nas220.h
configs: Re-sync with cmd/Kconfig
[people/ms/u-boot.git] / include / configs / nas220.h
1 /*
2 * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
3 *
4 * based on work from:
5 * (C) Copyright 2009
6 * Marvell Semiconductor <www.marvell.com>
7 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
8 *
9 * SPDX-License-Identifier: GPL-2.0+
10 */
11
12 #ifndef _CONFIG_NAS220_H
13 #define _CONFIG_NAS220_H
14
15 /*
16 * Machine type definition and ID
17 */
18 #define MACH_TYPE_NAS220 MACH_TYPE_RD88F6192_NAS
19 #define CONFIG_MACH_TYPE MACH_TYPE_NAS220
20 #define CONFIG_IDENT_STRING "\nNAS 220"
21
22 /*
23 * High Level Configuration Options (easy to change)
24 */
25 #define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */
26 #define CONFIG_KW88F6192 /* SOC Name */
27 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
28
29 /* power-on led, regulator, sata0, sata1 */
30 #define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))
31 #define NAS220_GE_OE_VAL_HIGH (0)
32 #define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)))
33 #define NAS220_GE_OE_HIGH (~(0))
34
35 /* PHY related */
36 #define MV88E1116_LED_FCTRL_REG 10
37 #define MV88E1116_CPRSP_CR3_REG 21
38 #define MV88E1116_MAC_CTRL_REG 21
39 #define MV88E1116_PGADR_REG 22
40 #define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
41 #define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
42
43 /*
44 * Commands configuration
45 */
46 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
47 #define CONFIG_CMD_NAND
48 #define CONFIG_CMD_DATE
49 #define CONFIG_CMD_IDE
50 #define CONFIG_SYS_LONGHELP
51 #define CONFIG_AUTO_COMPLETE
52 #define CONFIG_CMDLINE_EDITING
53
54 /*
55 * mv-common.h should be defined after CMD configs since it used them
56 * to enable certain macros
57 */
58 #include "mv-common.h"
59
60 /*
61 * Environment variables configurations
62 */
63 #ifdef CONFIG_CMD_NAND
64 #define CONFIG_ENV_IS_IN_NAND
65 #define CONFIG_ENV_SECT_SIZE 0x10000
66 #else
67 #define CONFIG_ENV_IS_NOWHERE
68 #endif
69
70 #define CONFIG_ENV_SIZE 0x10000
71 #define CONFIG_ENV_OFFSET 0xa0000
72
73 /*
74 * Default environment variables
75 */
76 #define CONFIG_BOOTCOMMAND ""
77
78 #define CONFIG_EXTRA_ENV_SETTINGS \
79 "bootargs=console=ttyS0,115200\0" \
80 "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\
81 "0x010000@0xa0000(env),"\
82 "0x500000@0xc0000(uimage),"\
83 "0x1a40000@0x5c0000(rootfs)\0" \
84 "mtdids=nand0=orion_nand\0"\
85 "bootdelay=-1\0"\
86 "autostart=no\0"\
87 "autoload=no\0"
88
89 /*
90 * Ethernet Driver configuration
91 */
92 #ifdef CONFIG_CMD_NET
93 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
94 #define CONFIG_PHY_BASE_ADR 8
95 #endif /* CONFIG_CMD_NET */
96
97 /*
98 * USB/EHCI
99 */
100 #ifdef CONFIG_CMD_USB
101 #define CONFIG_USB_EHCI /* Enable EHCI USB support */
102 #define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */
103 #define CONFIG_EHCI_IS_TDI
104 #define CONFIG_USB_STORAGE
105 #define CONFIG_DOS_PARTITION
106 #define CONFIG_SUPPORT_VFAT
107 #endif /* CONFIG_CMD_USB */
108
109 /*
110 * File system
111 */
112 #define CONFIG_CMD_JFFS2
113 #define CONFIG_JFFS2_NAND
114 #define CONFIG_JFFS2_LZO
115 #define CONFIG_CMD_UBI
116 #define CONFIG_CMD_UBIFS
117 #define CONFIG_RBTREE
118 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
119 #define CONFIG_MTD_PARTITIONS
120 #define CONFIG_CMD_MTDPARTS
121 #define CONFIG_LZO
122
123 /*
124 * SATA
125 */
126 #ifdef CONFIG_MVSATA_IDE
127 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
128 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
129 #endif
130
131 /*
132 * EFI partition
133 */
134 #define CONFIG_EFI_PARTITION
135
136 /*
137 * Date Time
138 */
139 #ifdef CONFIG_CMD_DATE
140 #define CONFIG_RTC_MV
141 #endif /* CONFIG_CMD_DATE */
142
143 #define CONFIG_KIRKWOOD_GPIO
144
145 #endif /* _CONFIG_NAS220_H */
146