include/configs/neo.h

   1 /*
   2  * (C) Copyright 2007-2008
   3  * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11
  12 #define CONFIG_405EP            1       /* this is a PPC405 CPU */
  13 #define CONFIG_NEO              1       /*  on a Neo board */
  14
  15 #define CONFIG_SYS_TEXT_BASE    0xFFFC0000
  16
  17 /*
  18  * Include common defines/options for all AMCC eval boards
  19  */
  20 #define CONFIG_HOSTNAME         neo
  21 #define CONFIG_IDENT_STRING     " neo 0.02"
  22 #include "amcc-common.h"
  23
  24 #define CONFIG_BOARD_EARLY_INIT_F
  25 #define CONFIG_BOARD_EARLY_INIT_R
  26 #define CONFIG_MISC_INIT_R
  27 #define CONFIG_LAST_STAGE_INIT
  28 #define CONFIG_SYS_GENERIC_BOARD
  29
  30 #define CONFIG_SYS_CLK_FREQ     33333333 /* external frequency to pll   */
  31
  32 /*
  33  * Configure PLL
  34  */
  35 #define PLLMR0_DEFAULT PLLMR0_266_133_66_33
  36 #define PLLMR1_DEFAULT PLLMR1_266_133_66_33
  37
  38 /* new uImage format support */
  39 #define CONFIG_FIT
  40 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
  41 #define CONFIG_FIT_DISABLE_SHA256
  42
  43 #define CONFIG_ENV_IS_IN_FLASH  /* use FLASH for environment vars */
  44
  45 /*
  46  * Default environment variables
  47  */
  48 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  49         CONFIG_AMCC_DEF_ENV                                             \
  50         CONFIG_AMCC_DEF_ENV_POWERPC                                     \
  51         CONFIG_AMCC_DEF_ENV_NOR_UPD                                     \
  52         "kernel_addr=fc000000\0"                                        \
  53         "fdt_addr=fc1e0000\0"                                           \
  54         "ramdisk_addr=fc200000\0"                                       \
  55         ""
  56
  57 #define CONFIG_PHY_ADDR         4       /* PHY address                  */
  58 #define CONFIG_HAS_ETH0
  59 #define CONFIG_HAS_ETH1
  60 #define CONFIG_PHY1_ADDR        0xc     /* EMAC1 PHY address            */
  61 #define CONFIG_PHY_CLK_FREQ    EMAC_STACR_CLK_66MHZ
  62
  63 /*
  64  * Commands additional to the ones defined in amcc-common.h
  65  */
  66 #define CONFIG_CMD_DTT
  67 #undef CONFIG_CMD_DHCP
  68 #undef CONFIG_CMD_DIAG
  69 #undef CONFIG_CMD_EEPROM
  70 #undef CONFIG_CMD_ELF
  71 #undef CONFIG_CMD_I2C
  72 #undef CONFIG_CMD_IRQ
  73 #undef CONFIG_CMD_NFS
  74
  75 /*
  76  * SDRAM configuration (please see cpu/ppc/sdram.[ch])
  77  */
  78 #define CONFIG_SDRAM_BANK0      1       /* init onboard SDRAM bank 0 */
  79
  80 /* SDRAM timings used in datasheet */
  81 #define CONFIG_SYS_SDRAM_CL            3        /* CAS latency */
  82 #define CONFIG_SYS_SDRAM_tRP           20       /* PRECHARGE command period */
  83 #define CONFIG_SYS_SDRAM_tRC           66       /* ACTIVE-to-ACTIVE command period */
  84 #define CONFIG_SYS_SDRAM_tRCD          20       /* ACTIVE-to-READ delay */
  85 #define CONFIG_SYS_SDRAM_tRFC           66      /* Auto refresh period */
  86
  87 /*
  88  * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
  89  * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
  90  * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD value.
  91  * The Linux BASE_BAUD define should match this configuration.
  92  *    baseBaud = cpuClock/(uartDivisor*16)
  93  * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
  94  * set Linux BASE_BAUD to 403200.
  95  */
  96 #define CONFIG_CONS_INDEX       1       /* Use UART0                    */
  97 #define CONFIG_SYS_NS16550
  98 #define CONFIG_SYS_NS16550_SERIAL
  99 #define CONFIG_SYS_NS16550_REG_SIZE     1
 100 #define CONFIG_SYS_NS16550_CLK          get_serial_clock()
 101
 102 #undef  CONFIG_SYS_EXT_SERIAL_CLOCK           /* external serial clock */
 103 #undef  CONFIG_SYS_405_UART_ERRATA_59         /* 405GP/CR Rev. D silicon */
 104 #define CONFIG_SYS_BASE_BAUD            691200
 105
 106 /*
 107  * I2C stuff
 108  */
 109 #define CONFIG_SYS_I2C_PPC4XX_SPEED_0           100000
 110
 111 /* RTC */
 112 #define CONFIG_RTC_DS1337
 113 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
 114
 115 /* Temp sensor/hwmon/dtt */
 116 #define CONFIG_DTT_LM63         1       /* National LM63        */
 117 #define CONFIG_DTT_SENSORS      { 0 }   /* Sensor addresses     */
 118 #define CONFIG_DTT_PWM_LOOKUPTABLE      \
 119                 { { 40, 10 }, { 50, 20 }, { 60, 40 } }
 120 #define CONFIG_DTT_TACH_LIMIT   0xa10
 121
 122 /*
 123  * FLASH organization
 124  */
 125 #define CONFIG_SYS_FLASH_CFI                            /* The flash is CFI compatible  */
 126 #define CONFIG_FLASH_CFI_DRIVER                 /* Use common CFI driver        */
 127
 128 #define CONFIG_SYS_FLASH_BASE           0xFC000000
 129 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
 130
 131 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks           */
 132 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* max number of sectors on one chip    */
 133
 134 #define CONFIG_SYS_FLASH_ERASE_TOUT     120000  /* Timeout for Flash Erase (in ms)      */
 135 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Timeout for Flash Write (in ms)      */
 136
 137 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1     /* use buffered writes (20x faster)     */
 138
 139 #define CONFIG_SYS_FLASH_EMPTY_INFO             /* print 'E' for empty sector on flinfo */
 140 #define CONFIG_SYS_FLASH_QUIET_TEST     1       /* don't warn upon unknown flash        */
 141
 142 #ifdef CONFIG_ENV_IS_IN_FLASH
 143 #define CONFIG_ENV_SECT_SIZE    0x20000 /* size of one complete sector          */
 144 #define CONFIG_ENV_ADDR         0xFFF00000
 145 #define CONFIG_ENV_SIZE         0x20000 /* Total Size of Environment Sector */
 146
 147 /* Address and size of Redundant Environment Sector     */
 148 #define CONFIG_ENV_ADDR_REDUND  0xFFF20000
 149 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 150 #endif
 151
 152 /*
 153  * PPC405 GPIO Configuration
 154  */
 155 #define CONFIG_SYS_4xx_GPIO_TABLE { \
 156 { \
 157 /* GPIO Core 0 */ \
 158 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO0   PerBLast   */ \
 159 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO1   TS1E       */ \
 160 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO2   TS2E       */ \
 161 { GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO3   TS1O       */ \
 162 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO4   TS2O       */ \
 163 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_1      }, /* GPIO5   TS3        */ \
 164 { GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO6   TS4        */ \
 165 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO7   TS5        */ \
 166 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO8   TS6        */ \
 167 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO9   TrcClk     */ \
 168 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10  PerCS1     */ \
 169 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11  PerCS2     */ \
 170 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12  PerCS3     */ \
 171 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13  PerCS4     */ \
 172 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14  PerAddr03  */ \
 173 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15  PerAddr04  */ \
 174 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16  PerAddr05  */ \
 175 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17  IRQ0       */ \
 176 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18  IRQ1       */ \
 177 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19  IRQ2       */ \
 178 { GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO20  IRQ3       */ \
 179 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO21  IRQ4       */ \
 180 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO22  IRQ5       */ \
 181 { GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO23  IRQ6       */ \
 182 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24  UART0_DCD  */ \
 183 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25  UART0_DSR  */ \
 184 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26  UART0_RI   */ \
 185 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27  UART0_DTR  */ \
 186 { GPIO_BASE, GPIO_IN,  GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28  UART1_Rx   */ \
 187 { GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29  UART1_Tx   */ \
 188 { GPIO_BASE, GPIO_OUT, GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO30  RejectPkt0 */ \
 189 { GPIO_BASE, GPIO_IN,  GPIO_SEL,  GPIO_OUT_NO_CHG }, /* GPIO31  RejectPkt1 */ \
 190 } \
 191 }
 192
 193 /*
 194  * Definitions for initial stack pointer and data area (in data cache)
 195  */
 196 /* use on chip memory (OCM) for temperary stack until sdram is tested */
 197 #define CONFIG_SYS_TEMP_STACK_OCM        1
 198
 199 /* On Chip Memory location */
 200 #define CONFIG_SYS_OCM_DATA_ADDR        0xF8000000
 201 #define CONFIG_SYS_OCM_DATA_SIZE        0x1000
 202 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_OCM_DATA_ADDR /* inside of SDRAM             */
 203 #define CONFIG_SYS_INIT_RAM_SIZE        CONFIG_SYS_OCM_DATA_SIZE /* Size of used area in RAM    */
 204
 205 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 206 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 207
 208 /*
 209  * External Bus Controller (EBC) Setup
 210  */
 211
 212 /* Memory Bank 0 (NOR-FLASH) initialization                    */
 213 #define CONFIG_SYS_EBC_PB0AP            0x92015480
 214 #define CONFIG_SYS_EBC_PB0CR            0xFC0DA000  /* BAS=0xFC0,BS=64MB,BU=R/W,BW=16bit */
 215
 216 /* Memory Bank 1 (NVRAM) initialization                                        */
 217 #define CONFIG_SYS_EBC_PB1AP            0x92015480
 218 #define CONFIG_SYS_EBC_PB1CR            0xFB85A000  /* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit  */
 219
 220 /* Memory Bank 2 (FPGA) initialization                 */
 221 #define CONFIG_SYS_FPGA0_BASE           0x7f100000
 222 #define CONFIG_SYS_EBC_PB2AP            0x92015480
 223 #define CONFIG_SYS_EBC_PB2CR            0x7f11a000  /* BAS=0x7f1,BS=1MB,BU=R/W,BW=16bit */
 224
 225 #define CONFIG_SYS_FPGA_BASE(k)         CONFIG_SYS_FPGA0_BASE
 226
 227 #define CONFIG_SYS_FPGA_COUNT           1
 228
 229 #define CONFIG_SYS_FPGA_PTR \
 230         { (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE }
 231
 232 #define CONFIG_SYS_FPGA_COMMON
 233
 234 /* Memory Bank 3 (Latches) initialization                      */
 235 #define CONFIG_SYS_LATCH_BASE           0x7f200000
 236 #define CONFIG_SYS_EBC_PB3AP            0x92015480
 237 #define CONFIG_SYS_EBC_PB3CR            0x7f21a000  /* BAS=0x7f2,BS=1MB,BU=R/W,BW=16bit */
 238
 239 #define CONFIG_SYS_LATCH0_RESET         0xffff
 240 #define CONFIG_SYS_LATCH0_BOOT          0xffff
 241 #define CONFIG_SYS_LATCH1_RESET         0xffbf
 242 #define CONFIG_SYS_LATCH1_BOOT          0xffff
 243
 244 #endif  /* __CONFIG_H */