include/configs/nitrogen6x.h

   1 /*
   2  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Boundary Devices Nitrogen6X
   5  * and Freescale i.MX6Q Sabre Lite boards.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #include "mx6_common.h"
  14
  15 #define CONFIG_MACH_TYPE        3769
  16
  17 /* Size of malloc() pool */
  18 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  19
  20 #define CONFIG_BOARD_EARLY_INIT_F
  21 #define CONFIG_MISC_INIT_R
  22 #define CONFIG_CI_UDC
  23 #define CONFIG_USBD_HS
  24 #define CONFIG_USB_GADGET_DUALSPEED
  25 #define CONFIG_USB_ETHER
  26 #define CONFIG_USB_ETH_CDC
  27 #define CONFIG_NETCONSOLE
  28
  29 #define CONFIG_MXC_UART
  30 #define CONFIG_MXC_UART_BASE           UART2_BASE
  31
  32 #define CONFIG_CMD_SF
  33 #ifdef CONFIG_CMD_SF
  34 #define CONFIG_SPI_FLASH_SST
  35 #define CONFIG_MXC_SPI
  36 #define CONFIG_SF_DEFAULT_BUS  0
  37 #define CONFIG_SF_DEFAULT_CS   0
  38 #define CONFIG_SF_DEFAULT_SPEED 25000000
  39 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
  40 #endif
  41
  42 /* I2C Configs */
  43 #define CONFIG_CMD_I2C
  44 #define CONFIG_SYS_I2C
  45 #define CONFIG_SYS_I2C_MXC
  46 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  47 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  48 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  49 #define CONFIG_SYS_I2C_SPEED            100000
  50 #define CONFIG_I2C_EDID
  51
  52 /* MMC Configs */
  53 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  54 #define CONFIG_SYS_FSL_USDHC_NUM       2
  55
  56 #ifdef CONFIG_MX6Q
  57 #define CONFIG_CMD_SATA
  58 #endif
  59
  60 /*
  61  * SATA Configs
  62  */
  63 #ifdef CONFIG_CMD_SATA
  64 #define CONFIG_DWC_AHSATA
  65 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  66 #define CONFIG_DWC_AHSATA_PORT_ID       0
  67 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  68 #define CONFIG_LBA48
  69 #define CONFIG_LIBATA
  70 #endif
  71
  72 #define CONFIG_CMD_PING
  73 #define CONFIG_CMD_DHCP
  74 #define CONFIG_CMD_MII
  75 #define CONFIG_FEC_MXC
  76 #define CONFIG_MII
  77 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  78 #define CONFIG_FEC_XCV_TYPE             RGMII
  79 #define CONFIG_ETHPRIME                 "FEC"
  80 #define CONFIG_FEC_MXC_PHYADDR          6
  81 #define CONFIG_PHYLIB
  82 #define CONFIG_PHY_MICREL
  83 #define CONFIG_PHY_MICREL_KSZ9021
  84
  85 /* USB Configs */
  86 #define CONFIG_CMD_USB
  87 #define CONFIG_USB_EHCI
  88 #define CONFIG_USB_EHCI_MX6
  89 #define CONFIG_USB_STORAGE
  90 #define CONFIG_USB_HOST_ETHER
  91 #define CONFIG_USB_ETHER_ASIX
  92 #define CONFIG_USB_ETHER_MCS7830
  93 #define CONFIG_USB_ETHER_SMSC95XX
  94 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  95 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
  96 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  97 #define CONFIG_MXC_USB_FLAGS    0
  98 #define CONFIG_USB_KEYBOARD
  99 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 100
 101 /* Miscellaneous commands */
 102 #define CONFIG_CMD_BMODE
 103
 104 /* Framebuffer and LCD */
 105 #define CONFIG_VIDEO
 106 #define CONFIG_VIDEO_IPUV3
 107 #define CONFIG_CFB_CONSOLE
 108 #define CONFIG_VGA_AS_SINGLE_DEVICE
 109 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 110 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 111 #define CONFIG_VIDEO_BMP_RLE8
 112 #define CONFIG_SPLASH_SCREEN
 113 #define CONFIG_SPLASH_SCREEN_ALIGN
 114 #define CONFIG_VIDEO_BMP_GZIP
 115 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024)
 116 #define CONFIG_BMP_16BPP
 117 #define CONFIG_IPUV3_CLK 260000000
 118 #define CONFIG_CMD_HDMIDETECT
 119 #define CONFIG_CONSOLE_MUX
 120 #define CONFIG_IMX_HDMI
 121 #define CONFIG_IMX_VIDEO_SKIP
 122
 123 #define CONFIG_PREBOOT                 ""
 124
 125 #ifdef CONFIG_CMD_SATA
 126 #define CONFIG_DRIVE_SATA "sata "
 127 #else
 128 #define CONFIG_DRIVE_SATA
 129 #endif
 130
 131 #ifdef CONFIG_CMD_MMC
 132 #define CONFIG_DRIVE_MMC "mmc "
 133 #else
 134 #define CONFIG_DRIVE_MMC
 135 #endif
 136
 137 #ifdef CONFIG_USB_STORAGE
 138 #define CONFIG_DRIVE_USB "usb "
 139 #else
 140 #define CONFIG_DRIVE_USB
 141 #endif
 142
 143 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
 144 #define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 145
 146 #if defined(CONFIG_SABRELITE)
 147 #define CONFIG_EXTRA_ENV_SETTINGS \
 148         "script=boot.scr\0" \
 149         "uimage=uImage\0" \
 150         "console=ttymxc1\0" \
 151         "fdt_high=0xffffffff\0" \
 152         "initrd_high=0xffffffff\0" \
 153         "fdt_file=imx6q-sabrelite.dtb\0" \
 154         "fdt_addr=0x18000000\0" \
 155         "boot_fdt=try\0" \
 156         "ip_dyn=yes\0" \
 157         "mmcdevs=0 1\0" \
 158         "mmcpart=1\0" \
 159         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 160         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 161                 "root=${mmcroot}\0" \
 162         "loadbootscript=" \
 163                 "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 164         "bootscript=echo Running bootscript from mmc ...; " \
 165                 "source\0" \
 166         "loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
 167         "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 168         "mmcboot=echo Booting from mmc ...; " \
 169                 "run mmcargs; " \
 170                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 171                         "if run loadfdt; then " \
 172                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 173                         "else " \
 174                                 "if test ${boot_fdt} = try; then " \
 175                                         "bootm; " \
 176                                 "else " \
 177                                         "echo WARN: Cannot load the DT; " \
 178                                 "fi; " \
 179                         "fi; " \
 180                 "else " \
 181                         "bootm; " \
 182                 "fi;\0" \
 183         "netargs=setenv bootargs console=${console},${baudrate} " \
 184                 "root=/dev/nfs " \
 185         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 186                 "netboot=echo Booting from net ...; " \
 187                 "run netargs; " \
 188                 "if test ${ip_dyn} = yes; then " \
 189                         "setenv get_cmd dhcp; " \
 190                 "else " \
 191                         "setenv get_cmd tftp; " \
 192                 "fi; " \
 193                 "${get_cmd} ${uimage}; " \
 194                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 195                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 196                                 "bootm ${loadaddr} - ${fdt_addr}; " \
 197                         "else " \
 198                                 "if test ${boot_fdt} = try; then " \
 199                                         "bootm; " \
 200                                 "else " \
 201                                         "echo WARN: Cannot load the DT; " \
 202                                 "fi; " \
 203                         "fi; " \
 204                 "else " \
 205                         "bootm; " \
 206                 "fi;\0"
 207
 208 #define CONFIG_BOOTCOMMAND \
 209         "for mmcdev in ${mmcdevs}; do " \
 210                 "mmc dev ${mmcdev}; " \
 211                 "if mmc rescan; then " \
 212                         "if run loadbootscript; then " \
 213                                 "run bootscript; " \
 214                         "else " \
 215                                 "if run loaduimage; then " \
 216                                         "run mmcboot; " \
 217                                 "fi; " \
 218                         "fi; " \
 219                 "fi; " \
 220         "done; " \
 221         "run netboot; "
 222 #else
 223 #define CONFIG_EXTRA_ENV_SETTINGS \
 224         "bootdevs=" CONFIG_DRIVE_TYPES "\0" \
 225         "umsdevs=" CONFIG_UMSDEVS "\0" \
 226         "console=ttymxc1\0" \
 227         "clearenv=if sf probe || sf probe || sf probe 1 ; then " \
 228                 "sf erase 0xc0000 0x2000 && " \
 229                 "echo restored environment to factory default ; fi\0" \
 230         "bootcmd=for dtype in ${bootdevs}" \
 231                 "; do " \
 232                         "if itest.s \"xusb\" == \"x${dtype}\" ; then " \
 233                                 "usb start ;" \
 234                         "fi; " \
 235                         "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
 236                                 "load " \
 237                                         "${dtype} ${disk}:1 " \
 238                                         "10008000 " \
 239                                         "/6x_bootscript" \
 240                                         "&& source 10008000 ; " \
 241                         "done ; " \
 242                 "done; " \
 243                 "setenv stdout serial,vga ; " \
 244                 "echo ; echo 6x_bootscript not found ; " \
 245                 "echo ; echo serial console at 115200, 8N1 ; echo ; " \
 246                 "echo details at http://boundarydevices.com/6q_bootscript ; " \
 247                 "setenv stdout serial;" \
 248                 "setenv stdin serial,usbkbd;" \
 249                 "for dtype in ${umsdevs} ; do " \
 250                         "if itest.s sata == ${dtype}; then " \
 251                                 "initcmd='sata init' ;" \
 252                         "else " \
 253                                 "initcmd='mmc rescan' ;" \
 254                         "fi; " \
 255                         "for disk in 0 1 ; do " \
 256                                 "if $initcmd && $dtype dev $disk ; then " \
 257                                         "setenv stdout serial,vga; " \
 258                                         "echo expose ${dtype} ${disk} " \
 259                                                 "over USB; " \
 260                                         "ums 0 $dtype $disk ;" \
 261                                 "fi; " \
 262                 "       done; " \
 263                 "done ;" \
 264                 "setenv stdout serial,vga; " \
 265                 "echo no block devices found;" \
 266                 "\0" \
 267         "initrd_high=0xffffffff\0" \
 268         "upgradeu=for dtype in ${bootdevs}" \
 269                 "; do " \
 270                 "for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
 271                         "load ${dtype} ${disk}:1 10008000 " \
 272                                 "/6x_upgrade " \
 273                                 "&& source 10008000 ; " \
 274                 "done ; " \
 275         "done\0" \
 276
 277 #endif
 278 /* Miscellaneous configurable options */
 279 #define CONFIG_SYS_MEMTEST_START       0x10000000
 280 #define CONFIG_SYS_MEMTEST_END         0x10010000
 281 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 282
 283 /* Physical Memory Map */
 284 #define CONFIG_NR_DRAM_BANKS           1
 285 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 286
 287 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 288 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 289 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 290
 291 #define CONFIG_SYS_INIT_SP_OFFSET \
 292         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 293 #define CONFIG_SYS_INIT_SP_ADDR \
 294         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 295
 296 /* Environment organization */
 297 #define CONFIG_ENV_SIZE                 (8 * 1024)
 298
 299 #if defined(CONFIG_SABRELITE)
 300 #define CONFIG_ENV_IS_IN_MMC
 301 #else
 302 #define CONFIG_ENV_IS_IN_SPI_FLASH
 303 #endif
 304
 305 #if defined(CONFIG_ENV_IS_IN_MMC)
 306 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 307 #define CONFIG_SYS_MMC_ENV_DEV          0
 308 #elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
 309 #define CONFIG_ENV_OFFSET               (768 * 1024)
 310 #define CONFIG_ENV_SECT_SIZE            (8 * 1024)
 311 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 312 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 313 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 314 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 315 #endif
 316
 317 #define CONFIG_CMD_BMP
 318
 319 #define CONFIG_CMD_TIME
 320 #define CONFIG_CMD_MEMTEST
 321 #define CONFIG_SYS_ALT_MEMTEST
 322
 323 /*
 324  * PCI express
 325  */
 326 #ifdef CONFIG_CMD_PCI
 327 #define CONFIG_PCI
 328 #define CONFIG_PCI_PNP
 329 #define CONFIG_PCI_SCAN_SHOW
 330 #define CONFIG_PCIE_IMX
 331 #endif
 332
 333
 334 #define CONFIG_USB_GADGET
 335 #define CONFIG_CMD_USB_MASS_STORAGE
 336 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 337 #define CONFIG_USB_GADGET_DOWNLOAD
 338 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 339
 340 /* Netchip IDs */
 341 #define CONFIG_G_DNL_VENDOR_NUM 0x0525
 342 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
 343 #define CONFIG_G_DNL_MANUFACTURER "Boundary"
 344
 345 #define CONFIG_USB_FUNCTION_FASTBOOT
 346 #define CONFIG_CMD_FASTBOOT
 347 #define CONFIG_ANDROID_BOOT_IMAGE
 348 #define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
 349 #define CONFIG_FASTBOOT_BUF_SIZE   0x07000000
 350
 351 #endif         /* __CONFIG_H */