include/configs/nokia_rx51.h

   1 /*
   2  * (C) Copyright 2011-2012
   3  * Pali Rohár <pali.rohar@gmail.com>
   4  *
   5  * (C) Copyright 2010
   6  * Alistair Buxton <a.j.buxton@gmail.com>
   7  *
   8  * Derived from Beagle Board code:
   9  * (C) Copyright 2006-2008
  10  * Texas Instruments.
  11  * Richard Woodruff <r-woodruff2@ti.com>
  12  * Syed Mohammed Khasim <x0khasim@ti.com>
  13  *
  14  * Configuration settings for the Nokia RX-51 aka N900.
  15  *
  16  * SPDX-License-Identifier:     GPL-2.0+
  17  */
  18
  19 #ifndef __CONFIG_H
  20 #define __CONFIG_H
  21
  22 /*
  23  * High Level Configuration Options
  24  */
  25
  26 #define CONFIG_OMAP                     /* in a TI OMAP core */
  27 #define CONFIG_OMAP3430                 /* which is in a 3430 */
  28 #define CONFIG_OMAP3_RX51               /* working with RX51 */
  29 #define CONFIG_SYS_L2CACHE_OFF          /* pretend there is no L2 CACHE */
  30 #define CONFIG_OMAP_COMMON
  31 /* Common ARM Erratas */
  32 #define CONFIG_ARM_ERRATA_454179
  33 #define CONFIG_ARM_ERRATA_430973
  34 #define CONFIG_ARM_ERRATA_621766
  35
  36 #define CONFIG_MACH_TYPE                MACH_TYPE_NOKIA_RX51
  37
  38 /*
  39  * Nokia X-Loader loading secondary image to address 0x80400000
  40  * NOLO loading boot image to random place, so it doesn't really
  41  * matter what we set this to. We have to copy u-boot to this address
  42  */
  43 #define CONFIG_SYS_TEXT_BASE    0x80008000
  44
  45 #define CONFIG_SDRC                     /* The chip has SDRC controller */
  46
  47 #include <asm/arch/cpu.h>               /* get chip and board defs */
  48 #include <asm/arch/omap.h>
  49 #include <asm/arch/mem.h>
  50 #include <linux/stringify.h>
  51
  52 /* Clock Defines */
  53 #define V_OSCK                  26000000        /* Clock output from T2 */
  54 #define V_SCLK                  (V_OSCK >> 1)
  55
  56 #undef CONFIG_USE_IRQ                           /* no support for IRQs */
  57 #define CONFIG_MISC_INIT_R
  58 #define CONFIG_SKIP_LOWLEVEL_INIT               /* X-Loader set everything up */
  59
  60 #define CONFIG_CMDLINE_TAG      /* enable passing kernel command line string */
  61 #define CONFIG_INITRD_TAG                       /* enable passing initrd */
  62 #define CONFIG_REVISION_TAG                     /* enable passing revision tag*/
  63 #define CONFIG_SETUP_MEMORY_TAGS                /* enable memory tag */
  64
  65 /*
  66  * Size of malloc() pool
  67  */
  68 #define CONFIG_ENV_SIZE                 (128 << 10)
  69 #define CONFIG_UBI_SIZE                 (512 << 10)
  70 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
  71                                         (128 << 10))
  72
  73 /*
  74  * Hardware drivers
  75  */
  76
  77 /*
  78  * NS16550 Configuration
  79  */
  80 #define V_NS16550_CLK           48000000                /* 48MHz (APLL96/2) */
  81
  82 #define CONFIG_SYS_NS16550_SERIAL
  83 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  84 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  85
  86 /*
  87  * select serial console configuration
  88  */
  89 #define CONFIG_CONS_INDEX               3
  90 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  91 #define CONFIG_SERIAL3                  3               /* UART3 on RX-51 */
  92
  93 /* allow to overwrite serial and ethaddr */
  94 #define CONFIG_ENV_OVERWRITE
  95 #define CONFIG_BAUDRATE                 115200
  96 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
  97 #define CONFIG_MMC
  98 #define CONFIG_GENERIC_MMC
  99 #define CONFIG_OMAP_HSMMC
 100 #define CONFIG_DOS_PARTITION
 101
 102 /* USB */
 103 #define CONFIG_USB_MUSB_UDC
 104 #define CONFIG_USB_MUSB_HCD
 105 #define CONFIG_USB_OMAP3
 106 #define CONFIG_TWL4030_USB
 107
 108 /* USB device configuration */
 109 #define CONFIG_USB_DEVICE
 110 #define CONFIG_USBD_VENDORID            0x0421
 111 #define CONFIG_USBD_PRODUCTID           0x01c8
 112 #define CONFIG_USBD_MANUFACTURER        "Nokia"
 113 #define CONFIG_USBD_PRODUCT_NAME        "N900"
 114
 115 #define CONFIG_SYS_NO_FLASH
 116
 117 /* commands to include */
 118
 119 #define CONFIG_CMDLINE_EDITING          /* add command line history */
 120 #define CONFIG_AUTO_COMPLETE            /* add autocompletion support */
 121
 122 #define CONFIG_CMD_BOOTMENU             /* ANSI terminal Boot Menu */
 123 #define CONFIG_CMD_CLEAR                /* ANSI terminal clear screen command */
 124
 125 #ifdef ONENAND_SUPPORT
 126
 127 #define CONFIG_CMD_ONENAND              /* ONENAND support */
 128 #define CONFIG_CMD_MTDPARTS             /* mtd parts support */
 129
 130 #ifdef UBIFS_SUPPORT
 131 #define CONFIG_CMD_UBIFS                /* UBIFS Support */
 132 #endif
 133
 134 #endif
 135
 136 #define CONFIG_OMAP3_SPI
 137 #define CONFIG_SYS_I2C
 138 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
 139 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
 140 #define CONFIG_SYS_I2C_OMAP34XX
 141
 142 /*
 143  * TWL4030
 144  */
 145 #define CONFIG_TWL4030_POWER
 146 #define CONFIG_TWL4030_LED
 147 #define CONFIG_TWL4030_KEYPAD
 148
 149 #define CONFIG_OMAP_GPIO
 150 #define GPIO_SLIDE                      71
 151
 152 /*
 153  * Board ONENAND Info.
 154  */
 155
 156 #define PART1_NAME                      "bootloader"
 157 #define PART1_SIZE                      128
 158 #define PART1_MULL                      1024
 159 #define PART1_SUFF                      "k"
 160 #define PART1_OFFS                      0x00000000
 161 #define PART1_MASK                      0x00000003
 162
 163 #define PART2_NAME                      "config"
 164 #define PART2_SIZE                      384
 165 #define PART2_MULL                      1024
 166 #define PART2_SUFF                      "k"
 167 #define PART2_OFFS                      0x00020000
 168 #define PART2_MASK                      0x00000000
 169
 170 #define PART3_NAME                      "log"
 171 #define PART3_SIZE                      256
 172 #define PART3_MULL                      1024
 173 #define PART3_SUFF                      "k"
 174 #define PART3_OFFS                      0x00080000
 175 #define PART3_MASK                      0x00000000
 176
 177 #define PART4_NAME                      "kernel"
 178 #define PART4_SIZE                      2
 179 #define PART4_MULL                      1024*1024
 180 #define PART4_SUFF                      "m"
 181 #define PART4_OFFS                      0x000c0000
 182 #define PART4_MASK                      0x00000000
 183
 184 #define PART5_NAME                      "initfs"
 185 #define PART5_SIZE                      2
 186 #define PART5_MULL                      1024*1024
 187 #define PART5_SUFF                      "m"
 188 #define PART5_OFFS                      0x002c0000
 189 #define PART5_MASK                      0x00000000
 190
 191 #define PART6_NAME                      "rootfs"
 192 #define PART6_SIZE                      257280
 193 #define PART6_MULL                      1024
 194 #define PART6_SUFF                      "k"
 195 #define PART6_OFFS                      0x004c0000
 196 #define PART6_MASK                      0x00000000
 197
 198 #ifdef ONENAND_SUPPORT
 199
 200 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 201 #define CONFIG_MTD_DEVICE
 202 #define CONFIG_MTD_PARTITIONS
 203
 204 #ifdef UBIFS_SUPPORT
 205 #define CONFIG_RBTREE
 206 #define CONFIG_LZO
 207 #endif
 208
 209 #define MTDIDS_DEFAULT                  "onenand0=onenand"
 210 #define MTDPARTS_DEFAULT                "mtdparts=onenand:" \
 211                 __stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \
 212                 __stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \
 213                 __stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \
 214                 __stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \
 215                 __stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \
 216                 "-(" PART6_NAME ")"
 217
 218 #endif
 219
 220 /* Watchdog support */
 221 #define CONFIG_HW_WATCHDOG
 222
 223 /*
 224  * Framebuffer
 225  */
 226 /* Video console */
 227 #define CONFIG_CFB_CONSOLE
 228 #define CONFIG_CFB_CONSOLE_ANSI /* Enable ANSI escape codes in framebuffer */
 229 #define CONFIG_VIDEO_LOGO
 230 #define VIDEO_FB_16BPP_PIXEL_SWAP
 231 #define VIDEO_FB_16BPP_WORD_SWAP
 232 #define CONFIG_VIDEO_SW_CURSOR
 233 #define CONFIG_SPLASH_SCREEN
 234
 235 /* functions for cfb_console */
 236 #define VIDEO_KBD_INIT_FCT              rx51_kp_init()
 237 #define VIDEO_TSTC_FCT                  rx51_kp_tstc
 238 #define VIDEO_GETC_FCT                  rx51_kp_getc
 239 #ifndef __ASSEMBLY__
 240 struct stdio_dev;
 241 int rx51_kp_init(void);
 242 int rx51_kp_tstc(struct stdio_dev *sdev);
 243 int rx51_kp_getc(struct stdio_dev *sdev);
 244 #endif
 245
 246 #ifndef MTDPARTS_DEFAULT
 247 #define MTDPARTS_DEFAULT
 248 #endif
 249
 250 /* Environment information */
 251 #define CONFIG_EXTRA_ENV_SETTINGS \
 252         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 253         "usbtty=cdc_acm\0" \
 254         "stdin=vga\0" \
 255         "stdout=vga\0" \
 256         "stderr=vga\0" \
 257         "setcon=setenv stdin ${con};" \
 258                 "setenv stdout ${con};" \
 259                 "setenv stderr ${con}\0" \
 260         "sercon=setenv con serial; run setcon\0" \
 261         "usbcon=setenv con usbtty; run setcon\0" \
 262         "vgacon=setenv con vga; run setcon\0" \
 263         "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
 264         "switchmmc=mmc dev ${mmcnum}\0" \
 265         "kernaddr=0x82008000\0" \
 266         "initrdaddr=0x84008000\0" \
 267         "scriptaddr=0x86008000\0" \
 268         "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
 269                 "${loadaddr} ${mmcfile}\0" \
 270         "kernload=setenv loadaddr ${kernaddr};" \
 271                 "setenv mmcfile ${mmckernfile};" \
 272                 "run fileload\0" \
 273         "initrdload=setenv loadaddr ${initrdaddr};" \
 274                 "setenv mmcfile ${mmcinitrdfile};" \
 275                 "run fileload\0" \
 276         "scriptload=setenv loadaddr ${scriptaddr};" \
 277                 "setenv mmcfile ${mmcscriptfile};" \
 278                 "run fileload\0" \
 279         "scriptboot=echo Running ${mmcscriptfile} from mmc " \
 280                 "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
 281         "kernboot=echo Booting ${mmckernfile} from mmc " \
 282                 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \
 283         "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
 284                 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \
 285         "attachboot=echo Booting attached kernel image ...;" \
 286                 "setenv setup_omap_atag 1;" \
 287                 "bootm ${attkernaddr};" \
 288                 "setenv setup_omap_atag\0" \
 289         "trymmcscriptboot=if run switchmmc; then " \
 290                         "if run scriptload; then " \
 291                                 "run scriptboot;" \
 292                         "fi;" \
 293                 "fi\0" \
 294         "trymmckernboot=if run switchmmc; then " \
 295                         "if run kernload; then " \
 296                                 "run kernboot;" \
 297                         "fi;" \
 298                 "fi\0" \
 299         "trymmckerninitrdboot=if run switchmmc; then " \
 300                         "if run initrdload; then " \
 301                                 "if run kernload; then " \
 302                                         "run kerninitrdboot;" \
 303                                 "fi;" \
 304                         "fi; " \
 305                 "fi\0" \
 306         "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
 307                 "setenv mmckernfile uImage; run trymmckernboot\0" \
 308         "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
 309                 "setenv mmcpart 2; run trymmcpartboot;" \
 310                 "setenv mmcpart 3; run trymmcpartboot;" \
 311                 "setenv mmcpart 4; run trymmcpartboot\0" \
 312         "trymmcboot=if run switchmmc; then " \
 313                         "setenv mmctype fat;" \
 314                         "run trymmcallpartboot;" \
 315                         "setenv mmctype ext2;" \
 316                         "run trymmcallpartboot;" \
 317                         "setenv mmctype ext4;" \
 318                         "run trymmcallpartboot;" \
 319                 "fi\0" \
 320         "emmcboot=setenv mmcnum 1; run trymmcboot\0" \
 321         "sdboot=setenv mmcnum 0; run trymmcboot\0" \
 322         "menucmd=bootmenu\0" \
 323         "bootmenu_0=Attached kernel=run attachboot\0" \
 324         "bootmenu_1=Internal eMMC=run emmcboot\0" \
 325         "bootmenu_2=External SD card=run sdboot\0" \
 326         "bootmenu_3=U-Boot boot order=boot\0" \
 327         "bootmenu_delay=30\0" \
 328         ""
 329
 330 #define CONFIG_PREBOOT \
 331         "setenv mmcnum 1; setenv mmcpart 1;" \
 332         "setenv mmcscriptfile bootmenu.scr;" \
 333         "if run switchmmc; then " \
 334                 "setenv mmcdone true;" \
 335                 "setenv mmctype fat;" \
 336                 "if run scriptload; then true; else " \
 337                         "setenv mmctype ext2;" \
 338                         "if run scriptload; then true; else " \
 339                                 "setenv mmctype ext4;" \
 340                                 "if run scriptload; then true; else " \
 341                                         "setenv mmcdone false;" \
 342                                 "fi;" \
 343                         "fi;" \
 344                 "fi;" \
 345                 "if ${mmcdone}; then " \
 346                         "run scriptboot;" \
 347                 "fi;" \
 348         "fi;" \
 349         "if run slide; then true; else " \
 350                 "setenv bootmenu_delay 0;" \
 351                 "setenv bootdelay 0;" \
 352         "fi"
 353
 354 #define CONFIG_POSTBOOTMENU \
 355         "echo;" \
 356         "echo Extra commands:;" \
 357         "echo run sercon - Use serial port for control.;" \
 358         "echo run usbcon - Use usbtty for control.;" \
 359         "echo run vgacon - Use framebuffer/keyboard.;" \
 360         "echo run sdboot - Boot from SD card slot.;" \
 361         "echo run emmcboot - Boot internal eMMC memory.;" \
 362         "echo run attachboot - Boot attached kernel image.;" \
 363         "echo"
 364
 365 #define CONFIG_BOOTCOMMAND \
 366         "run sdboot;" \
 367         "run emmcboot;" \
 368         "run attachboot;" \
 369         "echo"
 370
 371 #define CONFIG_MENU
 372 #define CONFIG_MENU_SHOW
 373
 374 /*
 375  * Miscellaneous configurable options
 376  */
 377 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 378 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 379 /* Print Buffer Size */
 380 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 381                                                 sizeof(CONFIG_SYS_PROMPT) + 16)
 382 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 383 /* Boot Argument Buffer Size */
 384 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
 385
 386 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
 387 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/
 388
 389 /* default load address */
 390 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0)
 391
 392 /*
 393  * OMAP3 has 12 GP timers, they can be driven by the system clock
 394  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 395  * This rate is divided by a local divisor.
 396  */
 397 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
 398 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 399
 400 /*
 401  * Stack sizes
 402  *
 403  * The stack sizes are set up in start.S using the settings below
 404  */
 405 #define CONFIG_STACKSIZE                (128 << 10) /* regular stack 128 KiB */
 406
 407 /*
 408  * Physical Memory Map
 409  */
 410 #define CONFIG_NR_DRAM_BANKS            2
 411 #define PHYS_SDRAM_1                    OMAP34XX_SDRC_CS0
 412
 413 /*
 414  * FLASH and environment organization
 415  */
 416
 417 #define CONFIG_ENV_IS_NOWHERE
 418
 419 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 420 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 421 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 422 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 423                         CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 424
 425 /*
 426  * Attached kernel image
 427  */
 428
 429 #define SDRAM_SIZE                      0x10000000      /* 256 MB */
 430 #define SDRAM_END                       (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)
 431
 432 #define IMAGE_MAXSIZE                   0x1FF800        /* 2 MB - 2 kB */
 433 #define KERNEL_OFFSET                   0x40000         /* 256 kB */
 434 #define KERNEL_MAXSIZE                  (IMAGE_MAXSIZE-KERNEL_OFFSET)
 435 #define KERNEL_ADDRESS                  (SDRAM_END-KERNEL_MAXSIZE)
 436
 437 /* Reserve protected RAM for attached kernel */
 438 #define CONFIG_PRAM                     ((KERNEL_MAXSIZE >> 10)+1)
 439
 440 #endif /* __CONFIG_H */