include/configs/novena.h

   1 /*
   2  * Configuration settings for the Novena U-boot.
   3  *
   4  * Copyright (C) 2014 Marek Vasut <marex@denx.de>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 /* System configurations */
  13 #define CONFIG_BOARD_EARLY_INIT_F
  14 #define CONFIG_BOARD_LATE_INIT
  15 #define CONFIG_MISC_INIT_R
  16 #define CONFIG_FIT
  17 #define CONFIG_KEYBOARD
  18
  19 #include "mx6_common.h"
  20
  21 /* U-Boot Commands */
  22 #define CONFIG_CMD_ASKENV
  23 #define CONFIG_CMD_BMODE
  24 #define CONFIG_CMD_DHCP
  25 #define CONFIG_CMD_EEPROM
  26 #define CONFIG_CMD_I2C
  27 #define CONFIG_CMD_FUSE
  28 #define CONFIG_CMD_MII
  29 #define CONFIG_CMD_NET
  30 #define CONFIG_CMD_PCI
  31 #define CONFIG_CMD_PING
  32 #define CONFIG_CMD_SATA
  33 #define CONFIG_CMD_SETEXPR
  34 #define CONFIG_CMD_TIME
  35 #define CONFIG_CMD_USB
  36 #define CONFIG_VIDEO
  37
  38 /* U-Boot general configurations */
  39 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
  40
  41 /* U-Boot environment */
  42 #define CONFIG_ENV_SIZE                 (16 * 1024)
  43 /*
  44  * Environment is on MMC, starting at offset 512KiB from start of the card.
  45  * Please place first partition at offset 1MiB from the start of the card
  46  * as recommended by GNU/fdisk. See below for details:
  47  * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
  48  */
  49 #ifdef CONFIG_CMD_MMC
  50 #define CONFIG_ENV_IS_IN_MMC
  51 #define CONFIG_SYS_MMC_ENV_DEV          0
  52 #define CONFIG_ENV_OFFSET               (512 * 1024)
  53 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
  54 #define CONFIG_ENV_OFFSET_REDUND        \
  55                 (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
  56 #else
  57 #define CONFIG_ENV_IS_NOWHERE
  58 #endif
  59
  60 /* Booting Linux */
  61 #define CONFIG_BOOTFILE                 "fitImage"
  62 #define CONFIG_BOOTARGS                 "console=ttymxc1,115200 "
  63 #define CONFIG_BOOTCOMMAND              "run net_nfs"
  64 #define CONFIG_HOSTNAME                 novena
  65
  66 /* Physical Memory Map */
  67 #define CONFIG_NR_DRAM_BANKS            1
  68 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  69 #define PHYS_SDRAM_SIZE                 0xF0000000
  70
  71 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  72 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  73 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  74
  75 #define CONFIG_SYS_INIT_SP_OFFSET \
  76         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  77 #define CONFIG_SYS_INIT_SP_ADDR \
  78         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  79
  80 #define CONFIG_SYS_MEMTEST_START        0x10000000
  81 #define CONFIG_SYS_MEMTEST_END          0x20000000
  82
  83 #define CONFIG_SYS_MALLOC_LEN           (64 * 1024 * 1024)
  84
  85 /* SPL */
  86 #define CONFIG_SPL_FAT_SUPPORT
  87 #define CONFIG_SPL_MMC_SUPPORT
  88 #include "imx6_spl.h"                   /* common IMX6 SPL configuration */
  89
  90 /* Ethernet Configuration */
  91 #ifdef CONFIG_CMD_NET
  92 #define CONFIG_FEC_MXC
  93 #define CONFIG_MII
  94 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  95 #define CONFIG_FEC_XCV_TYPE             RGMII
  96 #define CONFIG_ETHPRIME                 "FEC"
  97 #define CONFIG_FEC_MXC_PHYADDR          0x7
  98 #define CONFIG_PHYLIB
  99 #define CONFIG_PHY_MICREL
 100 #define CONFIG_PHY_MICREL_KSZ9021
 101 #define CONFIG_ARP_TIMEOUT              200UL
 102 #endif
 103
 104 /* I2C */
 105 #define CONFIG_SYS_I2C
 106 #define CONFIG_SYS_I2C_MXC
 107 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 108 #define CONFIG_I2C_MULTI_BUS
 109 #define CONFIG_I2C_MXC
 110 #define CONFIG_SYS_I2C_SPEED            100000
 111
 112 /* I2C EEPROM */
 113 #ifdef CONFIG_CMD_EEPROM
 114 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 115 #define CONFIG_SYS_SPD_BUS_NUM          2
 116 #endif
 117
 118 /* MMC Configs */
 119 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 120 #define CONFIG_SYS_FSL_USDHC_NUM        2
 121
 122 /* OCOTP Configs */
 123 #ifdef CONFIG_CMD_FUSE
 124 #define CONFIG_MXC_OCOTP
 125 #endif
 126
 127 /* PCI express */
 128 #ifdef CONFIG_CMD_PCI
 129 #define CONFIG_PCI
 130 #define CONFIG_PCI_PNP
 131 #define CONFIG_PCI_SCAN_SHOW
 132 #define CONFIG_PCIE_IMX
 133 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(3, 29)
 134 #define CONFIG_PCIE_IMX_POWER_GPIO      IMX_GPIO_NR(7, 12)
 135 #endif
 136
 137 /* PMIC */
 138 #define CONFIG_POWER
 139 #define CONFIG_POWER_I2C
 140 #define CONFIG_POWER_PFUZE100
 141 #define CONFIG_POWER_PFUZE100_I2C_ADDR  0x08
 142
 143 /* SATA Configs */
 144 #ifdef CONFIG_CMD_SATA
 145 #define CONFIG_DWC_AHSATA
 146 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 147 #define CONFIG_DWC_AHSATA_PORT_ID       0
 148 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 149 #define CONFIG_LBA48
 150 #define CONFIG_LIBATA
 151 #endif
 152
 153 /* UART */
 154 #define CONFIG_MXC_UART
 155 #define CONFIG_MXC_UART_BASE            UART2_BASE
 156
 157 /* USB Configs */
 158 #ifdef CONFIG_CMD_USB
 159 #define CONFIG_USB_EHCI
 160 #define CONFIG_USB_EHCI_MX6
 161 #define CONFIG_USB_STORAGE
 162 #define CONFIG_USB_KEYBOARD
 163 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
 164 #define CONFIG_USB_HOST_ETHER
 165 #define CONFIG_USB_ETHER_ASIX
 166 #define CONFIG_USB_ETHER_SMSC95XX
 167 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 168 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 169 #define CONFIG_MXC_USB_FLAGS            0
 170 /* Gadget part */
 171 #define CONFIG_CI_UDC
 172 #define CONFIG_USBD_HS
 173 #define CONFIG_USB_GADGET_DUALSPEED
 174 #define CONFIG_USB_ETHER
 175 #define CONFIG_USB_ETH_CDC
 176 #define CONFIG_NETCONSOLE
 177 #endif
 178
 179 /* Video output */
 180 #ifdef CONFIG_VIDEO
 181 #define CONFIG_VIDEO_IPUV3
 182 #define CONFIG_CFB_CONSOLE
 183 #define CONFIG_VGA_AS_SINGLE_DEVICE
 184 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 185 #define CONFIG_VIDEO_BMP_RLE8
 186 #define CONFIG_SPLASH_SCREEN
 187 #define CONFIG_BMP_16BPP
 188 #define CONFIG_VIDEO_LOGO
 189 #define CONFIG_IPUV3_CLK                260000000
 190 #define CONFIG_CMD_HDMIDETECT
 191 #define CONFIG_CONSOLE_MUX
 192 #define CONFIG_IMX_HDMI
 193 #define CONFIG_IMX_VIDEO_SKIP
 194 #endif
 195
 196 /* Extra U-Boot environment. */
 197 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 198         "fdt_high=0xffffffff\0"                                         \
 199         "initrd_high=0xffffffff\0"                                      \
 200         "consdev=ttymxc1\0"                                             \
 201         "baudrate=115200\0"                                             \
 202         "bootdev=/dev/mmcblk0p1\0"                                      \
 203         "rootdev=/dev/mmcblk0p2\0"                                      \
 204         "netdev=eth0\0"                                                 \
 205         "kernel_addr_r=0x18000000\0"                                    \
 206         "addcons="                                                      \
 207                 "setenv bootargs ${bootargs} "                          \
 208                 "console=${consdev},${baudrate}\0"                      \
 209         "addip="                                                        \
 210                 "setenv bootargs ${bootargs} "                          \
 211                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 212                         "${netmask}:${hostname}:${netdev}:off\0"        \
 213         "addmisc="                                                      \
 214                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 215         "addargs=run addcons addmisc\0"                                 \
 216         "mmcload="                                                      \
 217                 "mmc rescan ; "                                         \
 218                 "ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"       \
 219         "netload="                                                      \
 220                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 221         "miscargs=nohlt panic=1\0"                                      \
 222         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 223         "nfsargs="                                                      \
 224                 "setenv bootargs root=/dev/nfs rw "                     \
 225                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 226         "mmc_mmc="                                                      \
 227                 "run mmcload mmcargs addargs ; "                        \
 228                 "bootm ${kernel_addr_r}\0"                              \
 229         "mmc_nfs="                                                      \
 230                 "run mmcload nfsargs addip addargs ; "                  \
 231                 "bootm ${kernel_addr_r}\0"                              \
 232         "net_mmc="                                                      \
 233                 "run netload mmcargs addargs ; "                        \
 234                 "bootm ${kernel_addr_r}\0"                              \
 235         "net_nfs="                                                      \
 236                 "run netload nfsargs addip addargs ; "                  \
 237                 "bootm ${kernel_addr_r}\0"                              \
 238         "update_sd_spl_filename=SPL\0"                                  \
 239         "update_sd_uboot_filename=u-boot.img\0"                         \
 240         "update_sd_firmware="   /* Update the SD firmware partition */  \
 241                 "if mmc rescan ; then "                                 \
 242                 "if dhcp ${update_sd_spl_filename} ; then "             \
 243                 "mmc write ${loadaddr} 2 0x200 ; "                      \
 244                 "fi ; "                                                 \
 245                 "if dhcp ${update_sd_uboot_filename} ; then "           \
 246                 "fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
 247                 "fi ; "                                                 \
 248                 "fi\0"                                                  \
 249
 250 #endif                          /* __CONFIG_H */