include/configs/o2dnt-common.h

   1 /*
   2  *  Common configuration options for ifm camera boards
   3  *
   4  * (C) Copyright 2005
   5  * Sebastien Cazaux, ifm electronic gmbh
   6  *
   7  * (C) Copyright 2012
   8  * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __O2D_CONFIG_H
  14 #define __O2D_CONFIG_H
  15
  16 /*
  17  * High Level Configuration Options
  18  */
  19 #define CONFIG_MPC5200
  20 #define CONFIG_DISPLAY_BOARDINFO
  21
  22 #define CONFIG_SYS_MPC5XXX_CLKIN        33000000 /* running at 33.000000MHz */
  23
  24 #define CONFIG_SYS_CACHELINE_SIZE       32      /* For MPC5xxx CPUs */
  25 #if defined(CONFIG_CMD_KGDB)
  26 /* log base 2 of the above value */
  27 #define CONFIG_SYS_CACHELINE_SHIFT      5
  28 #endif
  29
  30 /*
  31 #define CONFIG_POST     (CONFIG_SYS_POST_MEMORY | \
  32                          CONFIG_SYS_POST_I2C)
  33 */
  34
  35 #ifdef CONFIG_POST
  36 /* preserve space for the post_word at end of on-chip SRAM */
  37 #define MPC5XXX_SRAM_POST_SIZE  (MPC5XXX_SRAM_SIZE - 4)
  38 #endif
  39
  40 /*
  41  * Serial console configuration
  42  */
  43 #define CONFIG_PSC_CONSOLE      5       /* console is on PSC5 */
  44 #define CONFIG_BAUDRATE         115200  /* ... at 115200 bps */
  45 #define CONFIG_SYS_BAUDRATE_TABLE \
  46         { 9600, 19200, 38400, 57600, 115200, 230400 }
  47
  48 /*
  49  * PCI Mapping:
  50  * 0x40000000 - 0x4fffffff - PCI Memory
  51  * 0x50000000 - 0x50ffffff - PCI IO Space
  52  */
  53 #undef CONFIG_PCI
  54 #define CONFIG_PCI_PNP          1
  55
  56 #define CONFIG_PCI_MEM_BUS      0x40000000
  57 #define CONFIG_PCI_MEM_PHYS     CONFIG_PCI_MEM_BUS
  58 #define CONFIG_PCI_MEM_SIZE     0x10000000
  59
  60 #define CONFIG_PCI_IO_BUS       0x50000000
  61 #define CONFIG_PCI_IO_PHYS      CONFIG_PCI_IO_BUS
  62 #define CONFIG_PCI_IO_SIZE      0x01000000
  63
  64 #define CONFIG_SYS_XLB_PIPELINING       1
  65
  66 /* Partitions */
  67 #define CONFIG_MAC_PARTITION
  68 #define CONFIG_DOS_PARTITION
  69 #define CONFIG_ISO_PARTITION
  70
  71 #define CONFIG_TIMESTAMP        /* Print image info with timestamp */
  72
  73 #define CONFIG_SYS_ALT_MEMTEST  /* Much more complex memory test */
  74
  75 /*
  76  * Supported commands
  77  */
  78 #define CONFIG_CMD_EEPROM
  79 #define CONFIG_CMD_FAT
  80 #define CONFIG_CMD_MII
  81 #ifdef CONFIG_PCI
  82 #define CONFIG_CMD_PCI
  83 #endif
  84 #ifdef CONFIG_POST
  85 #define CONFIG_CMD_DIAG
  86 #endif
  87
  88 #if (CONFIG_SYS_TEXT_BASE == 0xFC000000) || (CONFIG_SYS_TEXT_BASE == 0xFF000000)
  89 /* Boot low with 16 or 32 MB Flash */
  90 #define CONFIG_SYS_LOWBOOT      1
  91 #elif (CONFIG_SYS_TEXT_BASE != 0x00100000)
  92 #error "CONFIG_SYS_TEXT_BASE value is invalid"
  93 #endif
  94
  95 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds */
  96
  97 #define CONFIG_PREBOOT  "run master"
  98
  99 #undef  CONFIG_BOOTARGS
 100
 101 #if !defined(CONFIG_CONSOLE_DEV)
 102 #define CONFIG_CONSOLE_DEV      "ttyPSC1"
 103 #endif
 104
 105 /*
 106  * Default environment for booting old and new kernel versions
 107  */
 108 #define CONFIG_IFM_DEFAULT_ENV_OLD                                      \
 109         "flash_self_old=run ramargs addip addmem;"                      \
 110                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 111         "flash_nfs_old=run nfsargs addip addmem;"                       \
 112                 "bootm ${kernel_addr}\0"                                \
 113         "net_nfs_old=tftp ${kernel_addr_r} ${bootfile};"                \
 114                 "run nfsargs addip addmem;"                             \
 115                 "bootm ${kernel_addr_r}\0"
 116
 117 #define CONFIG_IFM_DEFAULT_ENV_NEW                                      \
 118         "fdt_addr_r=900000\0"                                           \
 119         "fdt_file="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME".dtb\0"        \
 120         "flash_self=run ramargs addip addtty addmisc;"                  \
 121                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"    \
 122         "flash_nfs=run nfsargs addip addtty addmisc;"                   \
 123                 "bootm ${kernel_addr} - ${fdt_addr}\0"                  \
 124         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 125                 "tftp ${fdt_addr_r} ${fdt_file}; "                      \
 126                 "run nfsargs addip addtty addmisc;"                     \
 127                 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"              \
 128
 129 #define CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
 130         "IOpin=0x64\0"                                                  \
 131         "addip=setenv bootargs ${bootargs} "                            \
 132                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 133                 ":${hostname}:${netdev}:off panic=1\0"                  \
 134         "addmem=setenv bootargs ${bootargs} ${memlimit}\0"              \
 135         "addmisc=sete bootargs ${bootargs} ${miscargs}\0"               \
 136         "addtty=sete bootargs ${bootargs} console="                     \
 137                 CONFIG_CONSOLE_DEV ",${baudrate}\0"                     \
 138         "bootfile="CONFIG_BOARD_NAME"/uImage_"CONFIG_BOARD_NAME"_act\0" \
 139         "kernel_addr_r=600000\0"                                        \
 140         "initrd_high=0x03e00000\0"                                      \
 141         "memlimit=mem="CONFIG_BOARD_MEM_LIMIT"M\0"                      \
 142         "memtest=mtest 0x00100000 "__stringify(CONFIG_SYS_MEMTEST_END)" 0 1\0" \
 143         "netdev=eth0\0"                                                 \
 144         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 145                 "nfsroot=${serverip}:${rootpath}\0"                     \
 146         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 147         "linuxname="CONFIG_BOARD_NAME"/uImage_"CONFIG_BOARD_NAME"_act\0"\
 148         "progLinux=tftp 200000 ${linuxname};erase ${linbot} ${lintop};" \
 149                 "cp.b ${fileaddr} ${linbot} ${filesize}\0"              \
 150         "ramname="CONFIG_BOARD_NAME"/uRamdisk_"CONFIG_BOARD_NAME"_act\0"\
 151         "progRam=tftp 200000 ${ramname};erase ${rambot} ${ramtop};"     \
 152                 "cp.b ${fileaddr} ${rambot} ${filesize}\0"              \
 153         "jffname="CONFIG_BOARD_NAME"/uJFFS2_"CONFIG_BOARD_NAME"_act\0"  \
 154         "progJff=tftp 200000 ${jffname};erase ${jffbot} ${jfftop};"     \
 155                 "cp.b ${fileaddr} ${jffbot} ${filesize}\0"              \
 156         "rootpath=/opt/eldk/ppc_6xx\0"                                  \
 157         "uboname=" CONFIG_BOARD_NAME                                    \
 158                 "/u-boot.bin_" CONFIG_BOARD_NAME "_act\0"               \
 159         "progubo=tftp 200000 ${uboname};"                               \
 160                 "protect off ${ubobot} ${ubotop};"                      \
 161                 "erase ${ubobot} ${ubotop};"                            \
 162                 "cp.b ${fileaddr} ${ubobot} ${filesize}\0"              \
 163         "unlock=yes\0"                                                  \
 164         "post=echo !!! "CONFIG_BOARD_NAME" POWER ON SELF TEST !!!;"     \
 165                 "setenv bootdelay 1;"                                   \
 166                 "crc32 "__stringify(CONFIG_SYS_TEXT_BASE)" "            \
 167                         BOARD_POST_CRC32_END";"                         \
 168                 "setenv bootcmd "CONFIG_BOARD_BOOTCMD";saveenv;reset\0"
 169
 170 #define CONFIG_BOOTCOMMAND      "run post"
 171
 172 /*
 173  * IPB Bus clocking configuration.
 174  */
 175 #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK         /* define for 133MHz speed */
 176
 177 #if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
 178 /*
 179  * PCI Bus clocking configuration
 180  *
 181  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
 182  * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
 183  * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
 184  */
 185 #define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2    /* define for 66MHz speed */
 186 #endif
 187
 188 /*
 189  * I2C configuration
 190  */
 191 #define CONFIG_HARD_I2C                 1       /* I2C with hardware support */
 192 #define CONFIG_SYS_I2C_MODULE           1       /* Select I2C module #1 or #2 */
 193 #define CONFIG_SYS_I2C_SPEED            100000  /* 100 kHz */
 194 #define CONFIG_SYS_I2C_SLAVE            0x7F
 195
 196 /*
 197  * EEPROM configuration:
 198  *
 199  * O2DNT board is equiped with Ramtron FRAM device FM24CL16
 200  * 16 Kib Ferroelectric Nonvolatile serial RAM memory
 201  * organized as 2048 x 8 bits and addressable as eight I2C devices
 202  * 0x50 ... 0x57 each 256 bytes in size
 203  *
 204  */
 205 #define CONFIG_SYS_I2C_FRAM
 206 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50    /* 1010000x */
 207 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 208 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 209 /*
 210  * There is no write delay with FRAM, write operations are performed at bus
 211  * speed. Thus, no status polling or write delay is needed.
 212  */
 213
 214 /*
 215  * Flash configuration
 216  */
 217 #define CONFIG_SYS_FLASH_CFI            1
 218 #define CONFIG_FLASH_CFI_DRIVER         1
 219 #define CONFIG_FLASH_16BIT
 220 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 221 #define CONFIG_SYS_FLASH_CFI_AMD_RESET
 222 #define CONFIG_SYS_FLASH_EMPTY_INFO
 223
 224 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max num of memory banks */
 225 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
 226 #define CONFIG_SYS_FLASH_ERASE_TOUT     240000  /* Erase Timeout (in ms) */
 227 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Write Timeout (in ms) */
 228 /* Timeout for Flash Clear Lock Bits (in ms) */
 229 #define CONFIG_SYS_FLASH_UNLOCK_TOUT    10000
 230 /* "Real" (hardware) sectors protection */
 231 #define CONFIG_SYS_FLASH_PROTECTION
 232
 233 /*
 234  * Environment settings
 235  */
 236 #define CONFIG_ENV_IS_IN_FLASH  1
 237 #define CONFIG_ENV_SIZE         0x20000
 238 #define CONFIG_ENV_SECT_SIZE    0x20000
 239 #define CONFIG_ENV_OVERWRITE    1
 240 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + 0x00040000)
 241
 242 /*
 243  * Memory map
 244  */
 245 #define CONFIG_SYS_MBAR         0xF0000000
 246 #define CONFIG_SYS_SDRAM_BASE   0x00000000
 247 #define CONFIG_SYS_DEFAULT_MBAR 0x80000000
 248
 249 /* Use SRAM until RAM will be available */
 250 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 251 #ifdef CONFIG_POST
 252 /* preserve space for the post_word at end of on-chip SRAM */
 253 #define CONFIG_SYS_INIT_RAM_SIZE        MPC5XXX_SRAM_POST_SIZE
 254 #else
 255 /* End of used area in DPRAM */
 256 #define CONFIG_SYS_INIT_RAM_SIZE        MPC5XXX_SRAM_SIZE
 257 #endif
 258
 259 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 260                                          GENERATED_GBL_DATA_SIZE)
 261 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 262
 263 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 264 #define CONFIG_SYS_MONITOR_LEN          (192 << 10) /* 192 kB for Monitor */
 265 #define CONFIG_SYS_MALLOC_LEN           (128 << 10) /* 128 kB for malloc() */
 266 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)   /* Initial map for Linux */
 267
 268 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 269 #define CONFIG_SYS_RAMBOOT              1
 270 #endif
 271
 272 /*
 273  * Ethernet configuration
 274  */
 275 #define CONFIG_MPC5xxx_FEC
 276 #define CONFIG_MPC5xxx_FEC_MII100
 277 #define CONFIG_PHY_ADDR                 0x00
 278 #define CONFIG_RESET_PHY_R
 279
 280 /*
 281  * GPIO configuration
 282  */
 283 #define CONFIG_SYS_GPIO_DATADIR         0x00000064 /* PSC1_2, PSC2_1,2 output */
 284 #define CONFIG_SYS_GPIO_OPENDRAIN       0x00000000 /* No open drain */
 285 #define CONFIG_SYS_GPIO_DATAVALUE       0x00000000 /* PSC1_1 to 1, rest to 0 */
 286 #define CONFIG_SYS_GPIO_ENABLE          0x00000064 /* PSC1_2, PSC2_1,2 enable */
 287
 288 /*
 289  * Miscellaneous configurable options
 290  */
 291 #define CONFIG_SYS_LONGHELP                     /* undef to save memory     */
 292 #define CONFIG_CMDLINE_EDITING
 293
 294 #if defined(CONFIG_CMD_KGDB)
 295 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size  */
 296 #else
 297 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size  */
 298 #endif
 299 /* Print Buffer Size */
 300 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 301                                          sizeof(CONFIG_SYS_PROMPT) + 16)
 302 /* max number of command args */
 303 #define CONFIG_SYS_MAXARGS              16
 304 /* Boot Argument Buffer Size */
 305 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 306
 307 /* default load address */
 308 #define CONFIG_SYS_LOAD_ADDR            0x100000
 309
 310 /* decrementer freq: 1 ms ticks */
 311
 312 /*
 313  * Various low-level settings
 314  */
 315 #define CONFIG_SYS_HID0_INIT            HID0_ICE | HID0_ICFI
 316 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 317
 318 #define CONFIG_SYS_BOOTCS_START         CONFIG_SYS_FLASH_BASE
 319 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 320 #define CONFIG_SYS_CS0_START            CONFIG_SYS_FLASH_BASE
 321 #define CONFIG_SYS_CS0_SIZE             CONFIG_SYS_FLASH_SIZE
 322
 323 #define CONFIG_BOARD_EARLY_INIT_R
 324
 325 #define CONFIG_SYS_CS_BURST             0x00000000
 326 #define CONFIG_SYS_CS_DEADCYCLE         0x33333333
 327
 328 /*
 329  * DT support
 330  */
 331 #define OF_CPU                  "PowerPC,5200@0"
 332 #define OF_SOC                  "soc5200@f0000000"
 333 #define OF_TBCLK                (bd->bi_busfreq / 4)
 334
 335 #endif /* __O2D_CONFIG_H */