include/configs/o2dnt-common.h

   1 /*
   2  *  Common configuration options for ifm camera boards
   3  *
   4  * (C) Copyright 2005
   5  * Sebastien Cazaux, ifm electronic gmbh
   6  *
   7  * (C) Copyright 2012
   8  * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __O2D_CONFIG_H
  14 #define __O2D_CONFIG_H
  15
  16 /*
  17  * High Level Configuration Options
  18  */
  19 #define CONFIG_MPC5200
  20 #define CONFIG_DISPLAY_BOARDINFO
  21 #define CONFIG_SYS_GENERIC_BOARD
  22
  23 #define CONFIG_SYS_MPC5XXX_CLKIN        33000000 /* running at 33.000000MHz */
  24
  25 #define CONFIG_SYS_CACHELINE_SIZE       32      /* For MPC5xxx CPUs */
  26 #if defined(CONFIG_CMD_KGDB)
  27 /* log base 2 of the above value */
  28 #define CONFIG_SYS_CACHELINE_SHIFT      5
  29 #endif
  30
  31 /*
  32 #define CONFIG_POST     (CONFIG_SYS_POST_MEMORY | \
  33                          CONFIG_SYS_POST_I2C)
  34 */
  35
  36 #ifdef CONFIG_POST
  37 /* preserve space for the post_word at end of on-chip SRAM */
  38 #define MPC5XXX_SRAM_POST_SIZE  (MPC5XXX_SRAM_SIZE - 4)
  39 #endif
  40
  41 /*
  42  * Serial console configuration
  43  */
  44 #define CONFIG_PSC_CONSOLE      5       /* console is on PSC5 */
  45 #define CONFIG_BAUDRATE         115200  /* ... at 115200 bps */
  46 #define CONFIG_SYS_BAUDRATE_TABLE \
  47         { 9600, 19200, 38400, 57600, 115200, 230400 }
  48
  49 /*
  50  * PCI Mapping:
  51  * 0x40000000 - 0x4fffffff - PCI Memory
  52  * 0x50000000 - 0x50ffffff - PCI IO Space
  53  */
  54 #undef CONFIG_PCI
  55 #define CONFIG_PCI_PNP          1
  56
  57 #define CONFIG_PCI_MEM_BUS      0x40000000
  58 #define CONFIG_PCI_MEM_PHYS     CONFIG_PCI_MEM_BUS
  59 #define CONFIG_PCI_MEM_SIZE     0x10000000
  60
  61 #define CONFIG_PCI_IO_BUS       0x50000000
  62 #define CONFIG_PCI_IO_PHYS      CONFIG_PCI_IO_BUS
  63 #define CONFIG_PCI_IO_SIZE      0x01000000
  64
  65 #define CONFIG_SYS_XLB_PIPELINING       1
  66
  67 /* Partitions */
  68 #define CONFIG_MAC_PARTITION
  69 #define CONFIG_DOS_PARTITION
  70 #define CONFIG_ISO_PARTITION
  71
  72 #define CONFIG_TIMESTAMP        /* Print image info with timestamp */
  73
  74 #define CONFIG_SYS_ALT_MEMTEST  /* Much more complex memory test */
  75
  76 /*
  77  * Supported commands
  78  */
  79 #define CONFIG_CMD_EEPROM
  80 #define CONFIG_CMD_FAT
  81 #define CONFIG_CMD_I2C
  82 #define CONFIG_CMD_MII
  83 #define CONFIG_CMD_PING
  84 #define CONFIG_CMD_DHCP
  85 #ifdef CONFIG_PCI
  86 #define CONFIG_CMD_PCI
  87 #endif
  88 #ifdef CONFIG_POST
  89 #define CONFIG_CMD_DIAG
  90 #endif
  91
  92 #if (CONFIG_SYS_TEXT_BASE == 0xFC000000) || (CONFIG_SYS_TEXT_BASE == 0xFF000000)
  93 /* Boot low with 16 or 32 MB Flash */
  94 #define CONFIG_SYS_LOWBOOT      1
  95 #elif (CONFIG_SYS_TEXT_BASE != 0x00100000)
  96 #error "CONFIG_SYS_TEXT_BASE value is invalid"
  97 #endif
  98
  99 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds */
 100
 101 #define CONFIG_PREBOOT  "run master"
 102
 103 #undef  CONFIG_BOOTARGS
 104
 105 #if !defined(CONFIG_CONSOLE_DEV)
 106 #define CONFIG_CONSOLE_DEV      "ttyPSC1"
 107 #endif
 108
 109 /*
 110  * Default environment for booting old and new kernel versions
 111  */
 112 #define CONFIG_IFM_DEFAULT_ENV_OLD                                      \
 113         "flash_self_old=run ramargs addip addmem;"                      \
 114                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 115         "flash_nfs_old=run nfsargs addip addmem;"                       \
 116                 "bootm ${kernel_addr}\0"                                \
 117         "net_nfs_old=tftp ${kernel_addr_r} ${bootfile};"                \
 118                 "run nfsargs addip addmem;"                             \
 119                 "bootm ${kernel_addr_r}\0"
 120
 121 #define CONFIG_IFM_DEFAULT_ENV_NEW                                      \
 122         "fdt_addr_r=900000\0"                                           \
 123         "fdt_file="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME".dtb\0"        \
 124         "flash_self=run ramargs addip addtty addmisc;"                  \
 125                 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0"    \
 126         "flash_nfs=run nfsargs addip addtty addmisc;"                   \
 127                 "bootm ${kernel_addr} - ${fdt_addr}\0"                  \
 128         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 129                 "tftp ${fdt_addr_r} ${fdt_file}; "                      \
 130                 "run nfsargs addip addtty addmisc;"                     \
 131                 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"              \
 132
 133 #define CONFIG_IFM_DEFAULT_ENV_SETTINGS                                 \
 134         "IOpin=0x64\0"                                                  \
 135         "addip=setenv bootargs ${bootargs} "                            \
 136                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 137                 ":${hostname}:${netdev}:off panic=1\0"                  \
 138         "addmem=setenv bootargs ${bootargs} ${memlimit}\0"              \
 139         "addmisc=sete bootargs ${bootargs} ${miscargs}\0"               \
 140         "addtty=sete bootargs ${bootargs} console="                     \
 141                 CONFIG_CONSOLE_DEV ",${baudrate}\0"                     \
 142         "bootfile="CONFIG_BOARD_NAME"/uImage_"CONFIG_BOARD_NAME"_act\0" \
 143         "kernel_addr_r=600000\0"                                        \
 144         "initrd_high=0x03e00000\0"                                      \
 145         "memlimit=mem="CONFIG_BOARD_MEM_LIMIT"M\0"                      \
 146         "memtest=mtest 0x00100000 "__stringify(CONFIG_SYS_MEMTEST_END)" 0 1\0" \
 147         "netdev=eth0\0"                                                 \
 148         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 149                 "nfsroot=${serverip}:${rootpath}\0"                     \
 150         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 151         "linuxname="CONFIG_BOARD_NAME"/uImage_"CONFIG_BOARD_NAME"_act\0"\
 152         "progLinux=tftp 200000 ${linuxname};erase ${linbot} ${lintop};" \
 153                 "cp.b ${fileaddr} ${linbot} ${filesize}\0"              \
 154         "ramname="CONFIG_BOARD_NAME"/uRamdisk_"CONFIG_BOARD_NAME"_act\0"\
 155         "progRam=tftp 200000 ${ramname};erase ${rambot} ${ramtop};"     \
 156                 "cp.b ${fileaddr} ${rambot} ${filesize}\0"              \
 157         "jffname="CONFIG_BOARD_NAME"/uJFFS2_"CONFIG_BOARD_NAME"_act\0"  \
 158         "progJff=tftp 200000 ${jffname};erase ${jffbot} ${jfftop};"     \
 159                 "cp.b ${fileaddr} ${jffbot} ${filesize}\0"              \
 160         "rootpath=/opt/eldk/ppc_6xx\0"                                  \
 161         "uboname=" CONFIG_BOARD_NAME                                    \
 162                 "/u-boot.bin_" CONFIG_BOARD_NAME "_act\0"               \
 163         "progubo=tftp 200000 ${uboname};"                               \
 164                 "protect off ${ubobot} ${ubotop};"                      \
 165                 "erase ${ubobot} ${ubotop};"                            \
 166                 "cp.b ${fileaddr} ${ubobot} ${filesize}\0"              \
 167         "unlock=yes\0"                                                  \
 168         "post=echo !!! "CONFIG_BOARD_NAME" POWER ON SELF TEST !!!;"     \
 169                 "setenv bootdelay 1;"                                   \
 170                 "crc32 "__stringify(CONFIG_SYS_TEXT_BASE)" "            \
 171                         BOARD_POST_CRC32_END";"                         \
 172                 "setenv bootcmd "CONFIG_BOARD_BOOTCMD";saveenv;reset\0"
 173
 174 #define CONFIG_BOOTCOMMAND      "run post"
 175
 176 /*
 177  * IPB Bus clocking configuration.
 178  */
 179 #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK         /* define for 133MHz speed */
 180
 181 #if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK)
 182 /*
 183  * PCI Bus clocking configuration
 184  *
 185  * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
 186  * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock
 187  * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
 188  */
 189 #define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2    /* define for 66MHz speed */
 190 #endif
 191
 192 /*
 193  * I2C configuration
 194  */
 195 #define CONFIG_HARD_I2C                 1       /* I2C with hardware support */
 196 #define CONFIG_SYS_I2C_MODULE           1       /* Select I2C module #1 or #2 */
 197 #define CONFIG_SYS_I2C_SPEED            100000  /* 100 kHz */
 198 #define CONFIG_SYS_I2C_SLAVE            0x7F
 199
 200 /*
 201  * EEPROM configuration:
 202  *
 203  * O2DNT board is equiped with Ramtron FRAM device FM24CL16
 204  * 16 Kib Ferroelectric Nonvolatile serial RAM memory
 205  * organized as 2048 x 8 bits and addressable as eight I2C devices
 206  * 0x50 ... 0x57 each 256 bytes in size
 207  *
 208  */
 209 #define CONFIG_SYS_I2C_FRAM
 210 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50    /* 1010000x */
 211 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 212 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 213 /*
 214  * There is no write delay with FRAM, write operations are performed at bus
 215  * speed. Thus, no status polling or write delay is needed.
 216  */
 217
 218 /*
 219  * Flash configuration
 220  */
 221 #define CONFIG_SYS_FLASH_CFI            1
 222 #define CONFIG_FLASH_CFI_DRIVER         1
 223 #define CONFIG_FLASH_16BIT
 224 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
 225 #define CONFIG_SYS_FLASH_CFI_AMD_RESET
 226 #define CONFIG_SYS_FLASH_EMPTY_INFO
 227
 228 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max num of memory banks */
 229 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
 230 #define CONFIG_SYS_FLASH_ERASE_TOUT     240000  /* Erase Timeout (in ms) */
 231 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Write Timeout (in ms) */
 232 /* Timeout for Flash Clear Lock Bits (in ms) */
 233 #define CONFIG_SYS_FLASH_UNLOCK_TOUT    10000
 234 /* "Real" (hardware) sectors protection */
 235 #define CONFIG_SYS_FLASH_PROTECTION
 236
 237 /*
 238  * Environment settings
 239  */
 240 #define CONFIG_ENV_IS_IN_FLASH  1
 241 #define CONFIG_ENV_SIZE         0x20000
 242 #define CONFIG_ENV_SECT_SIZE    0x20000
 243 #define CONFIG_ENV_OVERWRITE    1
 244 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + 0x00040000)
 245
 246 /*
 247  * Memory map
 248  */
 249 #define CONFIG_SYS_MBAR         0xF0000000
 250 #define CONFIG_SYS_SDRAM_BASE   0x00000000
 251 #define CONFIG_SYS_DEFAULT_MBAR 0x80000000
 252
 253 /* Use SRAM until RAM will be available */
 254 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 255 #ifdef CONFIG_POST
 256 /* preserve space for the post_word at end of on-chip SRAM */
 257 #define CONFIG_SYS_INIT_RAM_END         MPC5XXX_SRAM_POST_SIZE
 258 #else
 259 /* End of used area in DPRAM */
 260 #define CONFIG_SYS_INIT_RAM_END         MPC5XXX_SRAM_SIZE
 261 #endif
 262
 263 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_END - \
 264                                          GENERATED_GBL_DATA_SIZE)
 265 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 266
 267 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 268 #define CONFIG_SYS_MONITOR_LEN          (192 << 10) /* 192 kB for Monitor */
 269 #define CONFIG_SYS_MALLOC_LEN           (128 << 10) /* 128 kB for malloc() */
 270 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)   /* Initial map for Linux */
 271
 272 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 273 #define CONFIG_SYS_RAMBOOT              1
 274 #endif
 275
 276 /*
 277  * Ethernet configuration
 278  */
 279 #define CONFIG_MPC5xxx_FEC
 280 #define CONFIG_MPC5xxx_FEC_MII100
 281 #define CONFIG_PHY_ADDR                 0x00
 282 #define CONFIG_RESET_PHY_R
 283
 284 /*
 285  * GPIO configuration
 286  */
 287 #define CONFIG_SYS_GPIO_DATADIR         0x00000064 /* PSC1_2, PSC2_1,2 output */
 288 #define CONFIG_SYS_GPIO_OPENDRAIN       0x00000000 /* No open drain */
 289 #define CONFIG_SYS_GPIO_DATAVALUE       0x00000000 /* PSC1_1 to 1, rest to 0 */
 290 #define CONFIG_SYS_GPIO_ENABLE          0x00000064 /* PSC1_2, PSC2_1,2 enable */
 291
 292 /*
 293  * Miscellaneous configurable options
 294  */
 295 #define CONFIG_SYS_LONGHELP                     /* undef to save memory     */
 296 #define CONFIG_CMDLINE_EDITING
 297 #define CONFIG_SYS_HUSH_PARSER
 298
 299 #if defined(CONFIG_CMD_KGDB)
 300 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size  */
 301 #else
 302 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size  */
 303 #endif
 304 /* Print Buffer Size */
 305 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 306                                          sizeof(CONFIG_SYS_PROMPT) + 16)
 307 /* max number of command args */
 308 #define CONFIG_SYS_MAXARGS              16
 309 /* Boot Argument Buffer Size */
 310 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 311
 312 /* default load address */
 313 #define CONFIG_SYS_LOAD_ADDR            0x100000
 314
 315 /* decrementer freq: 1 ms ticks */
 316
 317 /*
 318  * Various low-level settings
 319  */
 320 #define CONFIG_SYS_HID0_INIT            HID0_ICE | HID0_ICFI
 321 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 322
 323 #define CONFIG_SYS_BOOTCS_START         CONFIG_SYS_FLASH_BASE
 324 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 325 #define CONFIG_SYS_CS0_START            CONFIG_SYS_FLASH_BASE
 326 #define CONFIG_SYS_CS0_SIZE             CONFIG_SYS_FLASH_SIZE
 327
 328 #define CONFIG_BOARD_EARLY_INIT_R
 329
 330 #define CONFIG_SYS_CS_BURST             0x00000000
 331 #define CONFIG_SYS_CS_DEADCYCLE         0x33333333
 332
 333 /*
 334  * DT support
 335  */
 336 #define CONFIG_OF_LIBFDT        1
 337 #define CONFIG_OF_BOARD_SETUP   1
 338
 339 #define OF_CPU                  "PowerPC,5200@0"
 340 #define OF_SOC                  "soc5200@f0000000"
 341 #define OF_TBCLK                (bd->bi_busfreq / 4)
 342
 343 #endif /* __O2D_CONFIG_H */