include/configs/omap3_igep00x0.h

   1 /*
   2  * Common configuration settings for IGEP technology based boards
   3  *
   4  * (C) Copyright 2012
   5  * ISEE 2007 SL, <www.iseebcn.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __IGEP00X0_H
  11 #define __IGEP00X0_H
  12
  13 #define CONFIG_NR_DRAM_BANKS            2
  14
  15 #include <configs/ti_omap3_common.h>
  16
  17 /*
  18  * We are only ever GP parts and will utilize all of the "downloaded image"
  19  * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
  20  */
  21 #undef CONFIG_SPL_TEXT_BASE
  22 #define CONFIG_SPL_TEXT_BASE            0x40200000
  23
  24 #define CONFIG_MISC_INIT_R
  25
  26 #define CONFIG_REVISION_TAG             1
  27
  28 /* GPIO banks */
  29 #define CONFIG_OMAP3_GPIO_2             /* GPIO32..63   is in GPIO bank 2 */
  30 #define CONFIG_OMAP3_GPIO_4             /* GPIO96..127  is in GPIO bank 4 */
  31
  32 /* TPS65950 */
  33 #define PBIASLITEVMODE1                 (1 << 8)
  34
  35 /* LED */
  36 #define IGEP0020_GPIO_LED               27
  37 #define IGEP0030_GPIO_LED               16
  38
  39 /* Board and revision detection GPIOs */
  40 #define IGEP0030_USB_TRANSCEIVER_RESET          54
  41 #define GPIO_IGEP00X0_BOARD_DETECTION           28
  42 #define GPIO_IGEP00X0_REVISION_DETECTION        129
  43
  44 /* USB */
  45 #define CONFIG_USB_MUSB_UDC             1
  46 #define CONFIG_USB_OMAP3                1
  47 #define CONFIG_TWL4030_USB              1
  48
  49 /* USB device configuration */
  50 #define CONFIG_USB_DEVICE               1
  51 #define CONFIG_USB_TTY                  1
  52
  53 /* Change these to suit your needs */
  54 #define CONFIG_USBD_VENDORID            0x0451
  55 #define CONFIG_USBD_PRODUCTID           0x5678
  56 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
  57 #define CONFIG_USBD_PRODUCT_NAME        "IGEP"
  58
  59 #ifndef CONFIG_SPL_BUILD
  60
  61 /* Environment */
  62 #define ENV_DEVICE_SETTINGS \
  63         "stdin=serial\0" \
  64         "stdout=serial\0" \
  65         "stderr=serial\0"
  66
  67 #define MEM_LAYOUT_SETTINGS \
  68         DEFAULT_LINUX_BOOT_ENV \
  69         "scriptaddr=0x87E00000\0" \
  70         "pxefile_addr_r=0x87F00000\0"
  71
  72 #define BOOT_TARGET_DEVICES(func) \
  73         func(MMC, mmc, 0)
  74
  75 #define CONFIG_BOOTCOMMAND \
  76         "run findfdt; " \
  77         "run distro_bootcmd"
  78
  79 #include <config_distro_bootcmd.h>
  80
  81 #define ENV_FINDFDT \
  82         "findfdt="\
  83                 "if test ${board_name} = igep0020; then " \
  84                         "if test ${board_rev} = F; then " \
  85                                 "setenv fdtfile omap3-igep0020-rev-f.dtb; " \
  86                         "else " \
  87                                 "setenv fdtfile omap3-igep0020.dtb; fi; fi; " \
  88                 "if test ${board_name} = igep0030; then " \
  89                         "if test ${board_rev} = G; then " \
  90                                 "setenv fdtfile omap3-igep0030-rev-g.dtb; " \
  91                         "else " \
  92                                 "setenv fdtfile omap3-igep0030.dtb; fi; fi; " \
  93                 "if test ${fdtfile} = ''; then " \
  94                         "echo WARNING: Could not determine device tree to use; fi; \0"
  95
  96 #define CONFIG_EXTRA_ENV_SETTINGS \
  97         ENV_FINDFDT \
  98         ENV_DEVICE_SETTINGS \
  99         MEM_LAYOUT_SETTINGS \
 100         BOOTENV
 101
 102 #endif
 103
 104 /*
 105  * SMSC911x Ethernet
 106  */
 107 #if defined(CONFIG_CMD_NET)
 108 #define CONFIG_SMC911X
 109 #define CONFIG_SMC911X_32_BIT
 110 #define CONFIG_SMC911X_BASE             0x2C000000
 111 #endif /* (CONFIG_CMD_NET) */
 112
 113 #define CONFIG_MTD_PARTITIONS
 114 #define CONFIG_SYS_MTDPARTS_RUNTIME
 115
 116 /* OneNAND config */
 117 #define CONFIG_USE_ONENAND_BOARD_INIT
 118 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 119 #define CONFIG_SYS_ONENAND_BLOCK_SIZE   (128*1024)
 120
 121 /* NAND config */
 122 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 123 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 124 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 125 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 126 #define CONFIG_SYS_NAND_OOBSIZE         64
 127 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 128 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 129 #define CONFIG_SYS_NAND_ECCPOS          { 2,  3,  4,  5,  6,  7,  8,  9, \
 130                                          10, 11, 12, 13, 14, 15, 16, 17, \
 131                                          18, 19, 20, 21, 22, 23, 24, 25, \
 132                                          26, 27, 28, 29, 30, 31, 32, 33, \
 133                                          34, 35, 36, 37, 38, 39, 40, 41, \
 134                                          42, 43, 44, 45, 46, 47, 48, 49, \
 135                                          50, 51, 52, 53, 54, 55, 56, 57, }
 136 #define CONFIG_SYS_NAND_ECCSIZE         512
 137 #define CONFIG_SYS_NAND_ECCBYTES        14
 138 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 139 #define CONFIG_NAND_OMAP_GPMC
 140
 141 /* UBI configuration */
 142 #define CONFIG_SPL_UBI                  1
 143 #define CONFIG_SPL_UBI_MAX_VOL_LEBS     256
 144 #define CONFIG_SPL_UBI_MAX_PEB_SIZE     (256*1024)
 145 #define CONFIG_SPL_UBI_MAX_PEBS         4096
 146 #define CONFIG_SPL_UBI_VOL_IDS          8
 147 #define CONFIG_SPL_UBI_LOAD_MONITOR_ID  0
 148 #define CONFIG_SPL_UBI_LOAD_KERNEL_ID   3
 149 #define CONFIG_SPL_UBI_LOAD_ARGS_ID     4
 150 #define CONFIG_SPL_UBI_PEB_OFFSET       4
 151 #define CONFIG_SPL_UBI_VID_OFFSET       512
 152 #define CONFIG_SPL_UBI_LEB_START        2048
 153 #define CONFIG_SPL_UBI_INFO_ADDR        0x88080000
 154
 155 /* environment organization */
 156 #define CONFIG_ENV_UBI_PART             "UBI"
 157 #define CONFIG_ENV_UBI_VOLUME           "config"
 158 #define CONFIG_ENV_UBI_VOLUME_REDUND    "config_r"
 159 #define CONFIG_UBI_SILENCE_MSG          1
 160 #define CONFIG_UBIFS_SILENCE_MSG        1
 161 #define CONFIG_ENV_SIZE                 (32*1024)
 162
 163 #endif /* __IGEP00X0_H */