include/configs/omap3_igep00x0.h

   1 /*
   2  * Common configuration settings for IGEP technology based boards
   3  *
   4  * (C) Copyright 2012
   5  * ISEE 2007 SL, <www.iseebcn.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __IGEP00X0_H
  11 #define __IGEP00X0_H
  12
  13 #ifdef CONFIG_BOOT_NAND
  14 #define CONFIG_NAND
  15 #endif
  16
  17 #define CONFIG_NR_DRAM_BANKS            2
  18
  19 #include <configs/ti_omap3_common.h>
  20 #include <asm/mach-types.h>
  21
  22 /*
  23  * Display CPU and Board information
  24  */
  25 #define CONFIG_DISPLAY_CPUINFO          1
  26 #define CONFIG_DISPLAY_BOARDINFO        1
  27
  28 #define CONFIG_MISC_INIT_R
  29
  30 #define CONFIG_REVISION_TAG             1
  31
  32 /* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
  33 #if (CONFIG_MACH_TYPE != MACH_TYPE_IGEP0032)
  34 #define CONFIG_STATUS_LED
  35 #define CONFIG_BOARD_SPECIFIC_LED
  36 #define CONFIG_GPIO_LED
  37 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
  38 #define RED_LED_GPIO 27
  39 #elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
  40 #define RED_LED_GPIO 16
  41 #else
  42 #error "status LED not defined for this machine."
  43 #endif
  44 #define RED_LED_DEV                     0
  45 #define STATUS_LED_BIT                  RED_LED_GPIO
  46 #define STATUS_LED_STATE                STATUS_LED_ON
  47 #define STATUS_LED_PERIOD               (CONFIG_SYS_HZ / 2)
  48 #define STATUS_LED_BOOT                 RED_LED_DEV
  49 #endif
  50
  51 /* GPIO banks */
  52 #define CONFIG_OMAP3_GPIO_3             /* GPIO64 .. 95 is in GPIO bank 3 */
  53 #define CONFIG_OMAP3_GPIO_5             /* GPIO128..159 is in GPIO bank 5 */
  54 #define CONFIG_OMAP3_GPIO_6             /* GPIO160..191 is in GPIO bank 6 */
  55
  56 /* USB */
  57 #define CONFIG_USB_MUSB_UDC             1
  58 #define CONFIG_USB_OMAP3                1
  59 #define CONFIG_TWL4030_USB              1
  60
  61 /* USB device configuration */
  62 #define CONFIG_USB_DEVICE               1
  63 #define CONFIG_USB_TTY                  1
  64 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1
  65
  66 /* Change these to suit your needs */
  67 #define CONFIG_USBD_VENDORID            0x0451
  68 #define CONFIG_USBD_PRODUCTID           0x5678
  69 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
  70 #define CONFIG_USBD_PRODUCT_NAME        "IGEP"
  71
  72 #ifdef CONFIG_BOOT_ONENAND
  73 #define CONFIG_CMD_ONENAND      /* ONENAND support              */
  74 #endif
  75
  76 #ifndef CONFIG_SPL_BUILD
  77
  78 /* Environment */
  79 #define ENV_DEVICE_SETTINGS \
  80         "stdin=serial\0" \
  81         "stdout=serial\0" \
  82         "stderr=serial\0"
  83
  84 #define MEM_LAYOUT_SETTINGS \
  85         DEFAULT_LINUX_BOOT_ENV \
  86         "scriptaddr=0x87E00000\0" \
  87         "pxefile_addr_r=0x87F00000\0"
  88
  89 #define BOOT_TARGET_DEVICES(func) \
  90         func(MMC, mmc, 0)
  91
  92 #include <config_distro_bootcmd.h>
  93
  94 #define CONFIG_EXTRA_ENV_SETTINGS \
  95         ENV_DEVICE_SETTINGS \
  96         MEM_LAYOUT_SETTINGS \
  97         BOOTENV
  98
  99 #endif
 100
 101 /*
 102  * FLASH and environment organization
 103  */
 104
 105 #ifdef CONFIG_BOOT_ONENAND
 106 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 107
 108 #define ONENAND_ENV_OFFSET              0x260000 /* environment starts here */
 109
 110 #define CONFIG_ENV_IS_IN_ONENAND        1
 111 #define CONFIG_ENV_SIZE                 (512 << 10) /* Total Size Environment */
 112 #define CONFIG_ENV_ADDR                 ONENAND_ENV_OFFSET
 113 #endif
 114
 115 #ifdef CONFIG_NAND
 116 #define CONFIG_ENV_OFFSET               0x260000 /* environment starts here */
 117 #define CONFIG_ENV_IS_IN_NAND           1
 118 #define CONFIG_ENV_SIZE                 (512 << 10) /* Total Size Environment */
 119 #define CONFIG_ENV_ADDR                 NAND_ENV_OFFSET
 120 #endif
 121
 122 /*
 123  * SMSC911x Ethernet
 124  */
 125 #if defined(CONFIG_CMD_NET)
 126 #define CONFIG_SMC911X
 127 #define CONFIG_SMC911X_32_BIT
 128 #define CONFIG_SMC911X_BASE             0x2C000000
 129 #endif /* (CONFIG_CMD_NET) */
 130
 131 /* OneNAND boot config */
 132 #ifdef CONFIG_BOOT_ONENAND
 133 #define CONFIG_SPL_ONENAND_SUPPORT
 134 #define CONFIG_SYS_ONENAND_U_BOOT_OFFS  0x80000
 135 #define CONFIG_SYS_ONENAND_PAGE_SIZE    2048
 136 #define CONFIG_SPL_ONENAND_LOAD_ADDR    0x80000
 137 #define CONFIG_SPL_ONENAND_LOAD_SIZE    \
 138         (512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
 139
 140 #endif
 141
 142 /* NAND boot config */
 143 #ifdef CONFIG_NAND
 144 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 145 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 146 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 147 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 148 #define CONFIG_SYS_NAND_OOBSIZE         64
 149 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 150 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 151 #define CONFIG_SYS_NAND_ECCPOS          { 2,  3,  4,  5,  6,  7,  8,  9, \
 152                                          10, 11, 12, 13, 14, 15, 16, 17, \
 153                                          18, 19, 20, 21, 22, 23, 24, 25, \
 154                                          26, 27, 28, 29, 30, 31, 32, 33, \
 155                                          34, 35, 36, 37, 38, 39, 40, 41, \
 156                                          42, 43, 44, 45, 46, 47, 48, 49, \
 157                                          50, 51, 52, 53, 54, 55, 56, 57, }
 158 #define CONFIG_SYS_NAND_ECCSIZE         512
 159 #define CONFIG_SYS_NAND_ECCBYTES        14
 160 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 161 #define CONFIG_NAND_OMAP_GPMC
 162 #define CONFIG_BCH
 163
 164 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 165 /* NAND: SPL falcon mode configs */
 166 #ifdef CONFIG_SPL_OS_BOOT
 167 #define CONFIG_CMD_SPL_NAND_OFS         0x240000
 168 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
 169 #define CONFIG_CMD_SPL_WRITE_SIZE       0x2000
 170 #endif
 171 #endif
 172
 173 #endif /* __IGEP00X0_H */