include/configs/omap3_igep00x0.h

   1 /*
   2  * Common configuration settings for IGEP technology based boards
   3  *
   4  * (C) Copyright 2012
   5  * ISEE 2007 SL, <www.iseebcn.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __IGEP00X0_H
  11 #define __IGEP00X0_H
  12
  13 #ifdef CONFIG_BOOT_NAND
  14 #define CONFIG_NAND
  15 #endif
  16
  17 #define CONFIG_NR_DRAM_BANKS            2
  18
  19 #include <configs/ti_omap3_common.h>
  20 #include <asm/mach-types.h>
  21
  22 #undef CONFIG_BOOTDELAY
  23
  24 /*
  25  * Display CPU and Board information
  26  */
  27 #define CONFIG_DISPLAY_CPUINFO          1
  28 #define CONFIG_DISPLAY_BOARDINFO        1
  29
  30 #define CONFIG_MISC_INIT_R
  31
  32 #define CONFIG_REVISION_TAG             1
  33
  34 /* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
  35 #if (CONFIG_MACH_TYPE != MACH_TYPE_IGEP0032)
  36 #define CONFIG_STATUS_LED
  37 #define CONFIG_BOARD_SPECIFIC_LED
  38 #define CONFIG_GPIO_LED
  39 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
  40 #define RED_LED_GPIO 27
  41 #elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
  42 #define RED_LED_GPIO 16
  43 #else
  44 #error "status LED not defined for this machine."
  45 #endif
  46 #define RED_LED_DEV                             0
  47 #define STATUS_LED_BIT                  RED_LED_GPIO
  48 #define STATUS_LED_STATE                STATUS_LED_ON
  49 #define STATUS_LED_PERIOD               (CONFIG_SYS_HZ / 2)
  50 #define STATUS_LED_BOOT                 RED_LED_DEV
  51 #endif
  52
  53 /* GPIO banks */
  54 #define CONFIG_OMAP3_GPIO_3             /* GPIO64 .. 95 is in GPIO bank 3 */
  55 #define CONFIG_OMAP3_GPIO_5             /* GPIO128..159 is in GPIO bank 5 */
  56 #define CONFIG_OMAP3_GPIO_6             /* GPIO160..191 is in GPIO bank 6 */
  57
  58 /* USB */
  59 #define CONFIG_USB_MUSB_UDC                     1
  60 #define CONFIG_USB_OMAP3                1
  61 #define CONFIG_TWL4030_USB              1
  62
  63 /* USB device configuration */
  64 #define CONFIG_USB_DEVICE               1
  65 #define CONFIG_USB_TTY                  1
  66 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1
  67
  68 /* Change these to suit your needs */
  69 #define CONFIG_USBD_VENDORID            0x0451
  70 #define CONFIG_USBD_PRODUCTID           0x5678
  71 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
  72 #define CONFIG_USBD_PRODUCT_NAME        "IGEP"
  73
  74 #define CONFIG_CMD_CACHE
  75 #ifdef CONFIG_BOOT_ONENAND
  76 #define CONFIG_CMD_ONENAND      /* ONENAND support              */
  77 #endif
  78 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
  79     (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
  80 #endif
  81 #define CONFIG_CMD_DHCP
  82 #define CONFIG_CMD_PING
  83
  84 /*#undef CONFIG_ENV_IS_NOWHERE*/
  85
  86 #ifndef CONFIG_SPL_BUILD
  87
  88 #include <config_distro_defaults.h>
  89
  90 /* Environment */
  91 #define ENV_DEVICE_SETTINGS \
  92         "stdin=serial\0" \
  93         "stdout=serial\0" \
  94         "stderr=serial\0"
  95
  96 #define MEM_LAYOUT_SETTINGS \
  97         DEFAULT_LINUX_BOOT_ENV \
  98         "scriptaddr=0x87E00000\0" \
  99         "pxefile_addr_r=0x87F00000\0"
 100
 101 #define BOOT_TARGET_DEVICES(func) \
 102         func(MMC, mmc, 0)
 103
 104 #include <config_distro_bootcmd.h>
 105
 106
 107 #define CONFIG_EXTRA_ENV_SETTINGS \
 108         ENV_DEVICE_SETTINGS \
 109         MEM_LAYOUT_SETTINGS \
 110         BOOTENV
 111
 112 #endif
 113
 114 /*
 115  * FLASH and environment organization
 116  */
 117
 118 #ifdef CONFIG_BOOT_ONENAND
 119 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 120
 121 #define ONENAND_ENV_OFFSET              0x260000 /* environment starts here */
 122
 123 #define CONFIG_ENV_IS_IN_ONENAND        1
 124 #define CONFIG_ENV_SIZE                 (512 << 10) /* Total Size Environment */
 125 #define CONFIG_ENV_ADDR                 ONENAND_ENV_OFFSET
 126 #endif
 127
 128 #ifdef CONFIG_NAND
 129 #define CONFIG_ENV_OFFSET               0x260000 /* environment starts here */
 130 #define CONFIG_ENV_IS_IN_NAND           1
 131 #define CONFIG_ENV_SIZE                 (512 << 10) /* Total Size Environment */
 132 #define CONFIG_ENV_ADDR                 NAND_ENV_OFFSET
 133 #endif
 134
 135 /*
 136  * SMSC911x Ethernet
 137  */
 138 #if defined(CONFIG_CMD_NET)
 139 #define CONFIG_SMC911X
 140 #define CONFIG_SMC911X_32_BIT
 141 #define CONFIG_SMC911X_BASE     0x2C000000
 142 #endif /* (CONFIG_CMD_NET) */
 143
 144 /* OneNAND boot config */
 145 #ifdef CONFIG_BOOT_ONENAND
 146 #define CONFIG_SPL_ONENAND_SUPPORT
 147 #define CONFIG_SYS_ONENAND_U_BOOT_OFFS  0x80000
 148 #define CONFIG_SYS_ONENAND_PAGE_SIZE    2048
 149 #define CONFIG_SPL_ONENAND_LOAD_ADDR    0x80000
 150 #define CONFIG_SPL_ONENAND_LOAD_SIZE    \
 151         (512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
 152
 153 #endif
 154
 155 /* NAND boot config */
 156 #ifdef CONFIG_NAND
 157 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 158 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 159 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 160 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 161 #define CONFIG_SYS_NAND_OOBSIZE         64
 162 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 163 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 164 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
 165                                                 10, 11, 12, 13}
 166 #define CONFIG_SYS_NAND_ECCSIZE         512
 167 #define CONFIG_SYS_NAND_ECCBYTES        3
 168 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
 169 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 170 /* NAND: SPL falcon mode configs */
 171 #ifdef CONFIG_SPL_OS_BOOT
 172 #define CONFIG_CMD_SPL_NAND_OFS         0x240000
 173 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
 174 #define CONFIG_CMD_SPL_WRITE_SIZE       0x2000
 175 #endif
 176 #endif
 177
 178 #endif /* __IGEP00X0_H */