include/configs/omap3_igep00x0.h

   1 /*
   2  * Common configuration settings for IGEP technology based boards
   3  *
   4  * (C) Copyright 2012
   5  * ISEE 2007 SL, <www.iseebcn.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __IGEP00X0_H
  11 #define __IGEP00X0_H
  12
  13 #define CONFIG_NR_DRAM_BANKS            2
  14 #define CONFIG_NAND
  15
  16 #include <configs/ti_omap3_common.h>
  17 #include <asm/mach-types.h>
  18
  19 /*
  20  * We are only ever GP parts and will utilize all of the "downloaded image"
  21  * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
  22  */
  23 #undef CONFIG_SPL_TEXT_BASE
  24 #define CONFIG_SPL_TEXT_BASE            0x40200000
  25
  26 /*
  27  * Display CPU and Board information
  28  */
  29 #define CONFIG_DISPLAY_CPUINFO          1
  30 #define CONFIG_DISPLAY_BOARDINFO        1
  31
  32 #define CONFIG_MISC_INIT_R
  33
  34 #define CONFIG_REVISION_TAG             1
  35
  36 /* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
  37 #if (CONFIG_MACH_TYPE != MACH_TYPE_IGEP0032)
  38 #define CONFIG_STATUS_LED
  39 #define CONFIG_BOARD_SPECIFIC_LED
  40 #define CONFIG_GPIO_LED
  41 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
  42 #define RED_LED_GPIO 27
  43 #elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
  44 #define RED_LED_GPIO 16
  45 #else
  46 #error "status LED not defined for this machine."
  47 #endif
  48 #define RED_LED_DEV                     0
  49 #define STATUS_LED_BIT                  RED_LED_GPIO
  50 #define STATUS_LED_STATE                STATUS_LED_ON
  51 #define STATUS_LED_PERIOD               (CONFIG_SYS_HZ / 2)
  52 #define STATUS_LED_BOOT                 RED_LED_DEV
  53 #endif
  54
  55 /* GPIO banks */
  56 #define CONFIG_OMAP3_GPIO_3             /* GPIO64 .. 95 is in GPIO bank 3 */
  57 #define CONFIG_OMAP3_GPIO_5             /* GPIO128..159 is in GPIO bank 5 */
  58 #define CONFIG_OMAP3_GPIO_6             /* GPIO160..191 is in GPIO bank 6 */
  59
  60 /* USB */
  61 #define CONFIG_USB_MUSB_UDC             1
  62 #define CONFIG_USB_OMAP3                1
  63 #define CONFIG_TWL4030_USB              1
  64
  65 /* USB device configuration */
  66 #define CONFIG_USB_DEVICE               1
  67 #define CONFIG_USB_TTY                  1
  68 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1
  69
  70 /* Change these to suit your needs */
  71 #define CONFIG_USBD_VENDORID            0x0451
  72 #define CONFIG_USBD_PRODUCTID           0x5678
  73 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
  74 #define CONFIG_USBD_PRODUCT_NAME        "IGEP"
  75
  76 #define CONFIG_CMD_MTDPARTS
  77 #define CONFIG_CMD_ONENAND
  78 #define CONFIG_CMD_UBI
  79
  80 #ifndef CONFIG_SPL_BUILD
  81
  82 /* Environment */
  83 #define ENV_DEVICE_SETTINGS \
  84         "stdin=serial\0" \
  85         "stdout=serial\0" \
  86         "stderr=serial\0"
  87
  88 #define MEM_LAYOUT_SETTINGS \
  89         DEFAULT_LINUX_BOOT_ENV \
  90         "scriptaddr=0x87E00000\0" \
  91         "pxefile_addr_r=0x87F00000\0"
  92
  93 #define BOOT_TARGET_DEVICES(func) \
  94         func(MMC, mmc, 0)
  95
  96 #include <config_distro_bootcmd.h>
  97
  98 #define CONFIG_EXTRA_ENV_SETTINGS \
  99         ENV_DEVICE_SETTINGS \
 100         MEM_LAYOUT_SETTINGS \
 101         BOOTENV
 102
 103 #endif
 104
 105 /*
 106  * SMSC911x Ethernet
 107  */
 108 #if defined(CONFIG_CMD_NET)
 109 #define CONFIG_SMC911X
 110 #define CONFIG_SMC911X_32_BIT
 111 #define CONFIG_SMC911X_BASE             0x2C000000
 112 #endif /* (CONFIG_CMD_NET) */
 113
 114 #define CONFIG_RBTREE
 115 #define CONFIG_MTD_PARTITIONS
 116 #define CONFIG_SYS_MTDPARTS_RUNTIME
 117
 118 /* OneNAND config */
 119 #define CONFIG_USE_ONENAND_BOARD_INIT
 120 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 121 #define CONFIG_SYS_ONENAND_BLOCK_SIZE   (128*1024)
 122
 123 /* NAND config */
 124 #define CONFIG_SPL_OMAP3_ID_NAND
 125 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 126 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 127 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 128 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 129 #define CONFIG_SYS_NAND_OOBSIZE         64
 130 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 131 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 132 #define CONFIG_SYS_NAND_ECCPOS          { 2,  3,  4,  5,  6,  7,  8,  9, \
 133                                          10, 11, 12, 13, 14, 15, 16, 17, \
 134                                          18, 19, 20, 21, 22, 23, 24, 25, \
 135                                          26, 27, 28, 29, 30, 31, 32, 33, \
 136                                          34, 35, 36, 37, 38, 39, 40, 41, \
 137                                          42, 43, 44, 45, 46, 47, 48, 49, \
 138                                          50, 51, 52, 53, 54, 55, 56, 57, }
 139 #define CONFIG_SYS_NAND_ECCSIZE         512
 140 #define CONFIG_SYS_NAND_ECCBYTES        14
 141 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 142 #define CONFIG_NAND_OMAP_GPMC
 143 #define CONFIG_BCH
 144
 145 /* UBI configuration */
 146 #define CONFIG_SPL_UBI                  1
 147 #define CONFIG_SPL_UBI_MAX_VOL_LEBS     256
 148 #define CONFIG_SPL_UBI_MAX_PEB_SIZE     (256*1024)
 149 #define CONFIG_SPL_UBI_MAX_PEBS         4096
 150 #define CONFIG_SPL_UBI_VOL_IDS          8
 151 #define CONFIG_SPL_UBI_LOAD_MONITOR_ID  0
 152 #define CONFIG_SPL_UBI_LOAD_KERNEL_ID   3
 153 #define CONFIG_SPL_UBI_LOAD_ARGS_ID     4
 154 #define CONFIG_SPL_UBI_PEB_OFFSET       4
 155 #define CONFIG_SPL_UBI_VID_OFFSET       512
 156 #define CONFIG_SPL_UBI_LEB_START        2048
 157 #define CONFIG_SPL_UBI_INFO_ADDR        0x88080000
 158
 159 /* environment organization */
 160 #define CONFIG_ENV_IS_IN_UBI            1
 161 #define CONFIG_ENV_UBI_PART             "UBI"
 162 #define CONFIG_ENV_UBI_VOLUME           "config"
 163 #define CONFIG_ENV_UBI_VOLUME_REDUND    "config_r"
 164 #define CONFIG_UBI_SILENCE_MSG          1
 165 #define CONFIG_UBIFS_SILENCE_MSG        1
 166 #define CONFIG_ENV_SIZE                 (32*1024)
 167
 168 #endif /* __IGEP00X0_H */