include/configs/omap3_igep00x0.h

   1 /*
   2  * Common configuration settings for IGEP technology based boards
   3  *
   4  * (C) Copyright 2012
   5  * ISEE 2007 SL, <www.iseebcn.com>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __IGEP00X0_H
  11 #define __IGEP00X0_H
  12
  13 #ifdef CONFIG_BOOT_NAND
  14 #define CONFIG_NAND
  15 #endif
  16
  17 #define CONFIG_NR_DRAM_BANKS            2
  18
  19 #include <configs/ti_omap3_common.h>
  20 #include <asm/mach-types.h>
  21
  22 /*
  23  * Display CPU and Board information
  24  */
  25 #define CONFIG_DISPLAY_CPUINFO          1
  26 #define CONFIG_DISPLAY_BOARDINFO        1
  27
  28 #define CONFIG_MISC_INIT_R
  29
  30 #define CONFIG_REVISION_TAG             1
  31
  32 /* Status LED */
  33 #define CONFIG_STATUS_LED
  34 #define CONFIG_BOARD_SPECIFIC_LED
  35 #define CONFIG_GPIO_LED
  36 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
  37 #define RED_LED_GPIO 27
  38 #endif
  39 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
  40 #define RED_LED_GPIO 16
  41 #endif
  42 #define RED_LED_DEV                             0
  43 #define STATUS_LED_BIT                  RED_LED_GPIO
  44 #define STATUS_LED_STATE                STATUS_LED_ON
  45 #define STATUS_LED_PERIOD               (CONFIG_SYS_HZ / 2)
  46 #define STATUS_LED_BOOT                 RED_LED_DEV
  47
  48 /* GPIO banks */
  49 #define CONFIG_OMAP3_GPIO_3             /* GPIO64 .. 95 is in GPIO bank 3 */
  50 #define CONFIG_OMAP3_GPIO_5             /* GPIO128..159 is in GPIO bank 5 */
  51 #define CONFIG_OMAP3_GPIO_6             /* GPIO160..191 is in GPIO bank 6 */
  52
  53 /* USB */
  54 #define CONFIG_MUSB_UDC                 1
  55 #define CONFIG_USB_OMAP3                1
  56 #define CONFIG_TWL4030_USB              1
  57
  58 /* USB device configuration */
  59 #define CONFIG_USB_DEVICE               1
  60 #define CONFIG_USB_TTY                  1
  61 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1
  62
  63 /* Change these to suit your needs */
  64 #define CONFIG_USBD_VENDORID            0x0451
  65 #define CONFIG_USBD_PRODUCTID           0x5678
  66 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
  67 #define CONFIG_USBD_PRODUCT_NAME        "IGEP"
  68
  69 #define CONFIG_CMD_CACHE
  70 #ifdef CONFIG_BOOT_ONENAND
  71 #define CONFIG_CMD_ONENAND      /* ONENAND support              */
  72 #endif
  73 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
  74     (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0032)
  75 #define CONFIG_CMD_NET          /* bootp, tftpboot, rarpboot    */
  76 #endif
  77 #define CONFIG_CMD_DHCP
  78 #define CONFIG_CMD_PING
  79 #define CONFIG_CMD_NFS          /* NFS support                  */
  80
  81 /*#undef CONFIG_ENV_IS_NOWHERE*/
  82
  83 #define CONFIG_EXTRA_ENV_SETTINGS \
  84         "usbtty=cdc_acm\0" \
  85         "loadaddr=0x82000000\0" \
  86         "dtbaddr=0x81600000\0" \
  87         "bootdir=/boot\0" \
  88         "bootfile=zImage\0" \
  89         "usbtty=cdc_acm\0" \
  90         "console=ttyO2,115200n8\0" \
  91         "mpurate=auto\0" \
  92         "vram=12M\0" \
  93         "dvimode=1024x768MR-16@60\0" \
  94         "defaultdisplay=dvi\0" \
  95         "mmcdev=0\0" \
  96         "mmcroot=/dev/mmcblk0p2 rw\0" \
  97         "mmcrootfstype=ext4 rootwait\0" \
  98         "nandroot=/dev/mtdblock4 rw\0" \
  99         "nandrootfstype=jffs2\0" \
 100         "mmcargs=setenv bootargs console=${console} " \
 101                 "mpurate=${mpurate} " \
 102                 "vram=${vram} " \
 103                 "omapfb.mode=dvi:${dvimode} " \
 104                 "omapfb.debug=y " \
 105                 "omapdss.def_disp=${defaultdisplay} " \
 106                 "root=${mmcroot} " \
 107                 "rootfstype=${mmcrootfstype}\0" \
 108         "nandargs=setenv bootargs console=${console} " \
 109                 "mpurate=${mpurate} " \
 110                 "vram=${vram} " \
 111                 "omapfb.mode=dvi:${dvimode} " \
 112                 "omapfb.debug=y " \
 113                 "omapdss.def_disp=${defaultdisplay} " \
 114                 "root=${nandroot} " \
 115                 "rootfstype=${nandrootfstype}\0" \
 116         "loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
 117         "importbootenv=echo Importing environment from mmc ...; " \
 118                 "env import -t $loadaddr $filesize\0" \
 119         "loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \
 120         "loadfdt=load mmc ${mmcdev}:2 ${dtbaddr} ${bootdir}/${dtbfile}\0" \
 121         "mmcboot=echo Booting from mmc ...; " \
 122                 "run mmcargs; " \
 123                 "bootz ${loadaddr}\0" \
 124         "mmcbootfdt=echo Booting with DT from mmc ...; " \
 125                 "bootz ${loadaddr} - ${dtbaddr}\0" \
 126         "nandboot=echo Booting from onenand ...; " \
 127                 "run nandargs; " \
 128                 "onenand read ${loadaddr} 280000 400000; " \
 129                 "bootz ${loadaddr}\0" \
 130
 131 #define CONFIG_BOOTCOMMAND \
 132         "mmc dev ${mmcdev}; if mmc rescan; then " \
 133                 "echo SD/MMC found on device ${mmcdev};" \
 134                 "if run loadbootenv; then " \
 135                         "run importbootenv;" \
 136                 "fi;" \
 137                 "if test -n $uenvcmd; then " \
 138                         "echo Running uenvcmd ...;" \
 139                         "run uenvcmd;" \
 140                 "fi;" \
 141                 "if run loadzimage; then " \
 142                         "if test -n $dtbfile; then " \
 143                                 "if run loadfdt; then " \
 144                                         "run mmcbootfdt;" \
 145                                 "fi;" \
 146                         "fi;" \
 147                         "run mmcboot;" \
 148                 "fi;" \
 149         "fi;" \
 150         "run nandboot;" \
 151
 152 /*
 153  * FLASH and environment organization
 154  */
 155
 156 #ifdef CONFIG_BOOT_ONENAND
 157 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 158
 159 #define ONENAND_ENV_OFFSET              0x260000 /* environment starts here */
 160
 161 #define CONFIG_ENV_IS_IN_ONENAND        1
 162 #define CONFIG_ENV_SIZE                 (512 << 10) /* Total Size Environment */
 163 #define CONFIG_ENV_ADDR                 ONENAND_ENV_OFFSET
 164 #endif
 165
 166 #ifdef CONFIG_NAND
 167 #define CONFIG_ENV_OFFSET               0x260000 /* environment starts here */
 168 #define CONFIG_ENV_IS_IN_NAND           1
 169 #define CONFIG_ENV_SIZE                 (512 << 10) /* Total Size Environment */
 170 #define CONFIG_ENV_ADDR                 NAND_ENV_OFFSET
 171 #endif
 172
 173 /*
 174  * SMSC911x Ethernet
 175  */
 176 #if defined(CONFIG_CMD_NET)
 177 #define CONFIG_SMC911X
 178 #define CONFIG_SMC911X_32_BIT
 179 #define CONFIG_SMC911X_BASE     0x2C000000
 180 #endif /* (CONFIG_CMD_NET) */
 181
 182 /* OneNAND boot config */
 183 #ifdef CONFIG_BOOT_ONENAND
 184 #define CONFIG_SPL_ONENAND_SUPPORT
 185 #define CONFIG_SYS_ONENAND_U_BOOT_OFFS  0x80000
 186 #define CONFIG_SYS_ONENAND_PAGE_SIZE    2048
 187 #define CONFIG_SPL_ONENAND_LOAD_ADDR    0x80000
 188 #define CONFIG_SPL_ONENAND_LOAD_SIZE    \
 189         (512 * 1024 - CONFIG_SPL_ONENAND_LOAD_ADDR)
 190
 191 #endif
 192
 193 /* NAND boot config */
 194 #ifdef CONFIG_NAND
 195 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT  16
 196 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 197 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 198 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 199 #define CONFIG_SYS_NAND_OOBSIZE         64
 200 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 201 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 202 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9,\
 203                                                 10, 11, 12, 13}
 204 #define CONFIG_SYS_NAND_ECCSIZE         512
 205 #define CONFIG_SYS_NAND_ECCBYTES        3
 206 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
 207 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 208 /* NAND: SPL falcon mode configs */
 209 #ifdef CONFIG_SPL_OS_BOOT
 210 #define CONFIG_CMD_SPL_NAND_OFS         0x240000
 211 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
 212 #define CONFIG_CMD_SPL_WRITE_SIZE       0x2000
 213 #endif
 214 #endif
 215
 216 #endif /* __IGEP00X0_H */