include/configs/omap3_overo.h

   1 /*
   2  * Configuration settings for the Gumstix Overo board.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
  11 #define CONFIG_NAND
  12
  13 #include <configs/ti_omap3_common.h>
  14 /*
  15  * We are only ever GP parts and will utilize all of the "downloaded image"
  16  * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
  17  */
  18 #undef CONFIG_SPL_TEXT_BASE
  19 #define CONFIG_SPL_TEXT_BASE            0x40200000
  20
  21 #define CONFIG_BCH
  22
  23 /* Display CPU and Board information */
  24 #define CONFIG_DISPLAY_CPUINFO
  25 #define CONFIG_DISPLAY_BOARDINFO
  26
  27 /* call misc_init_r */
  28 #define CONFIG_MISC_INIT_R
  29
  30 /* pass the revision tag */
  31 #define CONFIG_REVISION_TAG
  32
  33 /* override size of malloc() pool */
  34 #undef CONFIG_SYS_MALLOC_LEN
  35 #define CONFIG_ENV_SIZE         (128 << 10)     /* 128 KiB sector */
  36 /* Shift 128 << 15 provides 4 MiB heap to support UBI commands.
  37  * Shift 128 << 10 provides 128 KiB heap for limited-memory devices. */
  38 #define CONFIG_SYS_MALLOC_LEN   (CONFIG_ENV_SIZE + (128 << 15))
  39
  40 /* I2C Support */
  41 #define CONFIG_SYS_I2C_OMAP34XX
  42
  43 /* TWL4030 LED */
  44 #define CONFIG_TWL4030_LED
  45
  46 /* USB EHCI */
  47 #define CONFIG_USB_EHCI
  48 #define CONFIG_USB_EHCI_OMAP
  49 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO        183
  50 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      3
  51
  52 /* Initialize GPIOs by default */
  53 #define CONFIG_OMAP3_GPIO_2     /* GPIO32..63 is in GPIO Bank 2 */
  54 #define CONFIG_OMAP3_GPIO_3     /* GPIO64..95 is in GPIO Bank 3 */
  55 #define CONFIG_OMAP3_GPIO_4     /* GPIO96..127 is in GPIO Bank 4 */
  56 #define CONFIG_OMAP3_GPIO_5     /* GPIO128..159 is in GPIO Bank 5 */
  57 #define CONFIG_OMAP3_GPIO_6     /* GPIO160..191 is in GPIO Bank 6 */
  58
  59 /* commands to include */
  60
  61 #ifdef CONFIG_NAND
  62 #define CONFIG_CMD_UBI          /* UBI-formated MTD partition support */
  63 #define CONFIG_CMD_UBIFS        /* Read-only UBI volume operations */
  64
  65 #define CONFIG_RBTREE           /* required by CONFIG_CMD_UBI */
  66 #define CONFIG_LZO              /* required by CONFIG_CMD_UBIFS */
  67
  68 #define CONFIG_MTD_PARTITIONS   /* required for UBI partition support */
  69
  70 /* NAND block size is 128 KiB.  Synchronize these values with
  71  * overo_nand_partitions in mach-omap2/board-overo.c in Linux:
  72  *  xloader              4 * NAND_BLOCK_SIZE = 512 KiB
  73  *  uboot               14 * NAND_BLOCK_SIZE = 1792 KiB
  74  *  uboot environtment   2 * NAND_BLOCK_SIZE = 256 KiB
  75  *  linux               64 * NAND_BLOCK_SIZE = 8 MiB
  76  *  rootfs              remainder
  77  */
  78 #define MTDIDS_DEFAULT "nand0=omap2-nand.0"
  79 #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:"       \
  80         "512k(xloader),"                                \
  81         "1792k(u-boot),"                                \
  82         "256k(environ),"                                \
  83         "8m(linux),"                                    \
  84         "-(rootfs)"
  85 #else /* CONFIG_NAND */
  86 #define MTDPARTS_DEFAULT
  87 #endif /* CONFIG_NAND */
  88
  89 /* Board NAND Info. */
  90 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
  91                                                         /* to access nand */
  92 /* Environment information */
  93 #define CONFIG_EXTRA_ENV_SETTINGS \
  94         DEFAULT_LINUX_BOOT_ENV \
  95         "bootdir=/boot\0" \
  96         "bootfile=zImage\0" \
  97         "usbtty=cdc_acm\0" \
  98         "console=ttyO2,115200n8\0" \
  99         "mpurate=auto\0" \
 100         "optargs=\0" \
 101         "vram=12M\0" \
 102         "dvimode=1024x768MR-16@60\0" \
 103         "defaultdisplay=dvi\0" \
 104         "mmcdev=0\0" \
 105         "mmcroot=/dev/mmcblk0p2 rw\0" \
 106         "mmcrootfstype=ext4 rootwait\0" \
 107         "nandroot=ubi0:rootfs ubi.mtd=4\0" \
 108         "nandrootfstype=ubifs\0" \
 109         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 110         "mmcargs=setenv bootargs console=${console} " \
 111                 "${optargs} " \
 112                 "mpurate=${mpurate} " \
 113                 "vram=${vram} " \
 114                 "omapfb.mode=dvi:${dvimode} " \
 115                 "omapdss.def_disp=${defaultdisplay} " \
 116                 "root=${mmcroot} " \
 117                 "rootfstype=${mmcrootfstype}\0" \
 118         "nandargs=setenv bootargs console=${console} " \
 119                 "${optargs} " \
 120                 "mpurate=${mpurate} " \
 121                 "vram=${vram} " \
 122                 "omapfb.mode=dvi:${dvimode} " \
 123                 "omapdss.def_disp=${defaultdisplay} " \
 124                 "root=${nandroot} " \
 125                 "rootfstype=${nandrootfstype}\0" \
 126         "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 127         "bootscript=echo Running boot script from mmc ...; " \
 128                 "source ${loadaddr}\0" \
 129         "loadbootenv=load mmc ${mmcdev} ${loadaddr} uEnv.txt\0" \
 130         "importbootenv=echo Importing environment from mmc ...; " \
 131                 "env import -t ${loadaddr} ${filesize}\0" \
 132         "loaduimage=load mmc ${mmcdev} ${loadaddr} uImage\0" \
 133         "mmcboot=echo Booting from mmc...; " \
 134                 "run mmcargs; " \
 135                 "bootm ${loadaddr}\0" \
 136         "loadzimage=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}\0" \
 137         "loadfdt=load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${fdtfile}\0" \
 138         "loadubizimage=ubifsload ${loadaddr} ${bootdir}/${bootfile}\0" \
 139         "loadubifdt=ubifsload ${fdtaddr} ${bootdir}/${fdtfile}\0" \
 140         "mmcbootfdt=echo Booting with DT from mmc ...; " \
 141                 "run mmcargs; " \
 142                 "bootz ${loadaddr} - ${fdtaddr}\0" \
 143         "nandboot=echo Booting from nand ...; " \
 144                 "run nandargs; " \
 145                 "if nand read ${loadaddr} linux; then " \
 146                         "bootm ${loadaddr};" \
 147                 "fi;\0" \
 148         "nanddtsboot=echo Booting from nand with DTS...; " \
 149                 "run nandargs; " \
 150                 "ubi part rootfs; "\
 151                 "ubifsmount ubi0:rootfs; "\
 152                 "run loadubifdt; "\
 153                 "run loadubizimage; "\
 154                 "bootz ${loadaddr} - ${fdtaddr}\0" \
 155
 156 #define CONFIG_BOOTCOMMAND \
 157         "mmc dev ${mmcdev}; if mmc rescan; then " \
 158                 "if run loadbootscript; then " \
 159                         "run bootscript; " \
 160                 "fi;" \
 161                 "if run loadbootenv; then " \
 162                         "echo Loaded environment from ${bootenv};" \
 163                         "run importbootenv;" \
 164                 "fi;" \
 165                 "if test -n $uenvcmd; then " \
 166                         "echo Running uenvcmd ...;" \
 167                         "run uenvcmd;" \
 168                 "fi;" \
 169                 "if run loaduimage; then " \
 170                         "run mmcboot;" \
 171                 "fi;" \
 172                 "if run loadzimage; then " \
 173                         "if test -z \"${fdtfile}\"; then " \
 174                                 "setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \
 175                         "fi;" \
 176                         "if run loadfdt; then " \
 177                                 "run mmcbootfdt;" \
 178                         "fi;" \
 179                 "fi;" \
 180         "fi;" \
 181         "run nandboot; " \
 182         "if test -z \"${fdtfile}\"; then "\
 183                 "setenv fdtfile omap3-${boardname}-${expansionname}.dtb;" \
 184         "fi;" \
 185         "run nanddtsboot; " \
 186
 187 /* memtest works on */
 188 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
 189 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
 190                                         0x01F00000) /* 31MB */
 191
 192 /* FLASH and environment organization */
 193 #if defined(CONFIG_NAND)
 194 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
 195 #endif
 196
 197 /* Monitor at start of flash */
 198 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 199 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 200
 201 #define CONFIG_ENV_IS_IN_NAND
 202 #define ONENAND_ENV_OFFSET              0x240000 /* environment starts here */
 203 #define SMNAND_ENV_OFFSET               0x240000 /* environment starts here */
 204
 205 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 206 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 207 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
 208
 209 /* Configure SMSC9211 ethernet */
 210 #if defined(CONFIG_CMD_NET)
 211 #define CONFIG_SMC911X
 212 #define CONFIG_SMC911X_32_BIT
 213 #define CONFIG_SMC911X_BASE             0x2C000000
 214 #endif /* (CONFIG_CMD_NET) */
 215
 216 /* Initial RAM setup */
 217 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 218 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 219
 220 /* NAND boot config */
 221 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 222 #define CONFIG_SYS_NAND_MAX_ECCPOS  56
 223 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 224 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 225 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 226 #define CONFIG_SYS_NAND_OOBSIZE         64
 227 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 228 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 229 #define CONFIG_SYS_NAND_ECCPOS      {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
 230                                         13, 14, 16, 17, 18, 19, 20, 21, 22, \
 231                                         23, 24, 25, 26, 27, 28, 30, 31, 32, \
 232                                         33, 34, 35, 36, 37, 38, 39, 40, 41, \
 233                                         42, 44, 45, 46, 47, 48, 49, 50, 51, \
 234                                         52, 53, 54, 55, 56}
 235 #define CONFIG_SYS_NAND_ECCSIZE         512
 236 #define CONFIG_SYS_NAND_ECCBYTES        13
 237 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
 238 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 239 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 240 /* NAND: SPL falcon mode configs */
 241 #ifdef CONFIG_SPL_OS_BOOT
 242 #define CONFIG_CMD_SPL_NAND_OFS         0x240000
 243 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
 244 #define CONFIG_CMD_SPL_WRITE_SIZE       0x2000
 245 #endif
 246
 247 #endif                          /* __CONFIG_H */