]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/omap3_pandora.h
cmd: Kconfig: Fix CMD_UBIFS dependencies
[people/ms/u-boot.git] / include / configs / omap3_pandora.h
1 /*
2 * (C) Copyright 2008-2010
3 * GraÅžvydas Ignotas <notasas@gmail.com>
4 *
5 * Configuration settings for the OMAP3 Pandora.
6 *
7 * SPDX-License-Identifier: GPL-2.0+
8 */
9
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12
13 #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
14 #define CONFIG_NAND
15
16 /* override base for compatibility with MLO the device ships with */
17 #define CONFIG_SYS_TEXT_BASE 0x80008000
18
19 #include <configs/ti_omap3_common.h>
20
21 #define CONFIG_MISC_INIT_R
22 #define CONFIG_REVISION_TAG 1
23
24 #define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
25
26 #define CONFIG_SYS_DEVICE_NULLDEV 1
27
28 /*
29 * Hardware drivers
30 */
31
32 /* I2C Support */
33 #define CONFIG_SYS_I2C_OMAP34XX
34
35 /* TWL4030 LED */
36 #define CONFIG_TWL4030_LED
37
38 /*
39 * NS16550 Configuration
40 */
41 #undef CONFIG_SYS_NS16550_CLK
42 #define CONFIG_SYS_NS16550_SERIAL
43 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
44 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
45 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
46 #define CONFIG_SERIAL3 3
47
48 /* commands to include */
49
50 /*
51 * Board NAND Info.
52 */
53 #define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
54 /* to access nand */
55 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
56 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_HAM1_CODE_SW
57 #define CONFIG_SYS_NAND_PAGE_SIZE 2048
58 #define CONFIG_SYS_NAND_OOBSIZE 64
59
60 #ifdef CONFIG_NAND
61 #define CONFIG_CMD_UBIFS /* Read-only UBI volume operations */
62
63 #define CONFIG_RBTREE /* required by CONFIG_CMD_UBI */
64 #define CONFIG_LZO /* required by CONFIG_CMD_UBIFS */
65
66 #define CONFIG_MTD_PARTITIONS /* required for UBI partition support */
67
68 #define MTDIDS_DEFAULT "nand0=omap2-nand.0"
69 #define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(xloader),"\
70 "1920k(uboot),128k(uboot-env),"\
71 "10m(boot),-(rootfs)"
72 #else
73 #define MTDPARTS_DEFAULT
74 #endif
75
76
77 #define CONFIG_BOOTCOMMAND \
78 "run distro_bootcmd; " \
79 "setenv bootargs ${bootargs_ubi}; " \
80 "if mmc rescan && load mmc 0:1 ${loadaddr} autoboot.scr; then " \
81 "source ${loadaddr}; " \
82 "fi; " \
83 "ubi part boot && ubifsmount ubi:boot && " \
84 "ubifsload ${loadaddr} uImage && bootm ${loadaddr}"
85
86 #define BOOT_TARGET_DEVICES(func) \
87 func(MMC, mmc, 0) \
88
89 #include <config_distro_bootcmd.h>
90
91 #define CONFIG_EXTRA_ENV_SETTINGS \
92 DEFAULT_LINUX_BOOT_ENV \
93 "usbtty=cdc_acm\0" \
94 "bootargs_ubi=ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs " \
95 "rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K\0" \
96 "mtdparts=" MTDPARTS_DEFAULT "\0" \
97 BOOTENV \
98
99 /* memtest works on */
100 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
101 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
102 0x01F00000) /* 31MB */
103
104 #if defined(CONFIG_NAND)
105 #define CONFIG_SYS_FLASH_BASE NAND_BASE
106 #endif
107
108 /* Monitor at start of flash */
109 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
110
111 #define CONFIG_ENV_IS_IN_NAND 1
112 #define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
113
114 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
115 #define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
116 #define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
117
118 #endif /* __CONFIG_H */