include/configs/omap3_pandora.h

   1 /*
   2  * (C) Copyright 2008-2010
   3  * Gražvydas Ignotas <notasas@gmail.com>
   4  *
   5  * Configuration settings for the OMAP3 Pandora.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 /*
  14  * High Level Configuration Options
  15  */
  16 #define CONFIG_OMAP             1       /* in a TI OMAP core */
  17 #define CONFIG_OMAP34XX         1       /* which is a 34XX */
  18 #define CONFIG_OMAP3_PANDORA    1       /* working with pandora */
  19 #define CONFIG_OMAP_GPIO
  20 #define CONFIG_OMAP_COMMON
  21
  22 #define CONFIG_SDRC     /* The chip has SDRC controller */
  23
  24 #include <asm/arch/cpu.h>       /* get chip and board defs */
  25 #include <asm/arch/omap3.h>
  26
  27 /*
  28  * Display CPU and Board information
  29  */
  30 #define CONFIG_DISPLAY_CPUINFO          1
  31 #define CONFIG_DISPLAY_BOARDINFO        1
  32
  33 /* Clock Defines */
  34 #define V_OSCK                  26000000        /* Clock output from T2 */
  35 #define V_SCLK                  (V_OSCK >> 1)
  36
  37 #define CONFIG_MISC_INIT_R
  38
  39 #define CONFIG_CMDLINE_TAG              1       /* enable passing of ATAGs */
  40 #define CONFIG_SETUP_MEMORY_TAGS        1
  41 #define CONFIG_INITRD_TAG               1
  42 #define CONFIG_REVISION_TAG             1
  43
  44 #define CONFIG_OF_LIBFDT                1
  45
  46 /*
  47  * Size of malloc() pool
  48  */
  49 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB */
  50 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024 + CONFIG_ENV_SIZE)
  51
  52 /*
  53  * Hardware drivers
  54  */
  55
  56 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1
  57 #define CONFIG_SYS_DEVICE_NULLDEV       1
  58
  59 /* USB */
  60 #define CONFIG_MUSB_UDC                 1
  61 #define CONFIG_USB_OMAP3                1
  62 #define CONFIG_TWL4030_USB              1
  63
  64 /* USB device configuration */
  65 #define CONFIG_USB_DEVICE               1
  66 #define CONFIG_USB_TTY                  1
  67
  68 /*
  69  * NS16550 Configuration
  70  */
  71 #define V_NS16550_CLK                   48000000        /* 48MHz (APLL96/2) */
  72
  73 #define CONFIG_SYS_NS16550
  74 #define CONFIG_SYS_NS16550_SERIAL
  75 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  76 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  77
  78 /*
  79  * select serial console configuration
  80  */
  81 #define CONFIG_CONS_INDEX               3
  82 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  83 #define CONFIG_SERIAL3                  3
  84
  85 /* allow to overwrite serial and ethaddr */
  86 #define CONFIG_ENV_OVERWRITE
  87 #define CONFIG_BAUDRATE                 115200
  88 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600, \
  89                                         115200}
  90 #define CONFIG_GENERIC_MMC              1
  91 #define CONFIG_MMC                      1
  92 #define CONFIG_OMAP_HSMMC               1
  93 #define CONFIG_DOS_PARTITION            1
  94
  95 /* commands to include */
  96 #include <config_cmd_default.h>
  97
  98 #define CONFIG_CMD_EXT2         /* EXT2 Support                 */
  99 #define CONFIG_CMD_FAT          /* FAT support                  */
 100
 101 #define CONFIG_CMD_I2C          /* I2C serial bus support       */
 102 #define CONFIG_CMD_MMC          /* MMC support                  */
 103 #define CONFIG_CMD_NAND         /* NAND support                 */
 104 #define CONFIG_CMD_CACHE        /* Cache control                */
 105
 106 #undef CONFIG_CMD_FLASH         /* flinfo, erase, protect       */
 107 #undef CONFIG_CMD_FPGA          /* FPGA configuration Support   */
 108 #undef CONFIG_CMD_IMI           /* iminfo                       */
 109 #undef CONFIG_CMD_IMLS          /* List all found images        */
 110 #undef CONFIG_CMD_NET           /* bootp, tftpboot, rarpboot    */
 111 #undef CONFIG_CMD_NFS           /* NFS support                  */
 112
 113 #define CONFIG_SYS_NO_FLASH
 114 #define CONFIG_HARD_I2C                 1
 115 #define CONFIG_SYS_I2C_SPEED            100000
 116 #define CONFIG_SYS_I2C_SLAVE            1
 117 #define CONFIG_DRIVER_OMAP34XX_I2C      1
 118
 119 /*
 120  * TWL4030
 121  */
 122 #define CONFIG_TWL4030_POWER            1
 123 #define CONFIG_TWL4030_LED              1
 124
 125 /*
 126  * Board NAND Info.
 127  */
 128 #define CONFIG_NAND_OMAP_GPMC
 129 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
 130                                                         /* to access nand */
 131 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 132                                                         /* to access nand */
 133                                                         /* at CS0 */
 134 #define GPMC_NAND_ECC_LP_x16_LAYOUT     1
 135
 136 #define CONFIG_SYS_MAX_NAND_DEVICE      1       /* Max number of NAND */
 137                                                 /* devices */
 138
 139 #ifdef CONFIG_CMD_NAND
 140 #define CONFIG_CMD_MTDPARTS
 141 #define CONFIG_MTD_PARTITIONS
 142 #define CONFIG_MTD_DEVICE
 143 #define CONFIG_CMD_UBI
 144 #define CONFIG_CMD_UBIFS
 145 #define CONFIG_RBTREE
 146 #define CONFIG_LZO
 147
 148 #define MTDIDS_DEFAULT                  "nand0=nand"
 149 #define MTDPARTS_DEFAULT                "mtdparts=nand:512k(xloader),"\
 150                                         "1920k(uboot),128k(uboot-env),"\
 151                                         "10m(boot),-(rootfs)"
 152 #else
 153 #define MTDPARTS_DEFAULT
 154 #endif
 155
 156 /* Environment information */
 157 #define CONFIG_BOOTDELAY                1
 158
 159 #define CONFIG_EXTRA_ENV_SETTINGS \
 160         "usbtty=cdc_acm\0" \
 161         "loadaddr=0x82000000\0" \
 162         "bootargs=ubi.mtd=4 ubi.mtd=3 root=ubi0:rootfs rootfstype=ubifs " \
 163                 "rw rootflags=bulk_read vram=6272K omapfb.vram=0:3000K\0" \
 164         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 165
 166 #define CONFIG_BOOTCOMMAND \
 167         "if mmc rescan && fatload mmc1 0 ${loadaddr} autoboot.scr || " \
 168                         "ext2load mmc1 0 ${loadaddr} autoboot.scr; then " \
 169                 "source ${loadaddr}; " \
 170         "fi; " \
 171         "ubi part boot && ubifsmount ubi:boot && " \
 172                 "ubifsload ${loadaddr} uImage && bootm ${loadaddr}"
 173
 174 #define CONFIG_AUTO_COMPLETE    1
 175 /*
 176  * Miscellaneous configurable options
 177  */
 178 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 179 #define CONFIG_SYS_HUSH_PARSER          /* use "hush" command parser */
 180 #define CONFIG_SYS_PROMPT               "Pandora # "
 181 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 182 /* Print Buffer Size */
 183 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 184                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 185 #define CONFIG_SYS_MAXARGS              16      /* max number of command */
 186                                                 /* args */
 187 /* Boot Argument Buffer Size */
 188 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 189 /* memtest works on */
 190 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
 191 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
 192                                         0x01F00000) /* 31MB */
 193
 194 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0) /* default load */
 195                                                                 /* address */
 196
 197 /*
 198  * OMAP3 has 12 GP timers, they can be driven by the system clock
 199  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 200  * This rate is divided by a local divisor.
 201  */
 202 #define CONFIG_SYS_TIMERBASE            OMAP34XX_GPT2
 203 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 204 #define CONFIG_SYS_HZ                   1000
 205
 206 /*-----------------------------------------------------------------------
 207  * Physical Memory Map
 208  */
 209 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
 210 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
 211 #define PHYS_SDRAM_2            OMAP34XX_SDRC_CS1
 212
 213 #define CONFIG_SYS_TEXT_BASE            0x80008000
 214 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 215 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 216 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 217 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 218                                         CONFIG_SYS_INIT_RAM_SIZE - \
 219                                         GENERATED_GBL_DATA_SIZE)
 220
 221 /*-----------------------------------------------------------------------
 222  * FLASH and environment organization
 223  */
 224
 225 /* **** PISMO SUPPORT *** */
 226
 227 /* Configure the PISMO */
 228 #define PISMO1_NAND_SIZE                GPMC_SIZE_128M
 229 #define PISMO1_ONEN_SIZE                GPMC_SIZE_128M
 230
 231 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 232
 233 #if defined(CONFIG_CMD_NAND)
 234 #define CONFIG_SYS_FLASH_BASE           PISMO1_NAND_BASE
 235 #endif
 236
 237 /* Monitor at start of flash */
 238 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 239
 240 #define CONFIG_ENV_IS_IN_NAND           1
 241 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
 242
 243 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 244 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 245 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
 246
 247 #define CONFIG_SYS_CACHELINE_SIZE       64
 248
 249 #endif                          /* __CONFIG_H */