include/configs/omap3_zoom1.h

   1 /*
   2  * (C) Copyright 2006-2008
   3  * Texas Instruments.
   4  * Richard Woodruff <r-woodruff2@ti.com>
   5  * Syed Mohammed Khasim <x0khasim@ti.com>
   6  * Nishanth Menon <nm@ti.com>
   7  *
   8  * Configuration settings for the TI OMAP3430 Zoom MDK board.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 /*
  17  * High Level Configuration Options
  18  */
  19 #define CONFIG_OMAP3_ZOOM1      1       /* working with Zoom MDK Rev1 */
  20 #define CONFIG_SYS_GENERIC_BOARD
  21
  22 #define CONFIG_NAND
  23 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
  24 #include <asm/arch/cpu.h>               /* get chip and board defs */
  25 #include <asm/arch/omap.h>
  26 #include <configs/ti_omap3_common.h>
  27
  28 /* Remove SPL boot option - we do not support that on LDP yet */
  29 #undef CONFIG_SPL_FRAMEWORK
  30 #undef CONFIG_SPL_OS_BOOT
  31
  32 /* Generic NAND definition conflicts with debug_base */
  33 #undef CONFIG_SYS_NAND_BASE
  34
  35 /*
  36  * Display CPU and Board information
  37  */
  38 #define CONFIG_DISPLAY_CPUINFO          1
  39 #define CONFIG_DISPLAY_BOARDINFO        1
  40
  41 #define CONFIG_MISC_INIT_R
  42
  43 #define CONFIG_REVISION_TAG             1
  44
  45 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB */
  46
  47 /*
  48  * Hardware drivers
  49  */
  50
  51 /* USB */
  52 #define CONFIG_MUSB_UDC                 1
  53 #define CONFIG_USB_OMAP3                1
  54 #define CONFIG_TWL4030_USB              1
  55
  56 /* USB device configuration */
  57 #define CONFIG_USB_DEVICE               1
  58 #define CONFIG_USB_TTY                  1
  59 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    1
  60 /* Change these to suit your needs */
  61 #define CONFIG_USBD_VENDORID            0x0451
  62 #define CONFIG_USBD_PRODUCTID           0x5678
  63 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
  64 #define CONFIG_USBD_PRODUCT_NAME        "Zoom1"
  65
  66 #define MTDIDS_DEFAULT                  "nand0=nand"
  67 #define MTDPARTS_DEFAULT                "mtdparts=nand:512k(x-loader),"\
  68                                         "1920k(u-boot),128k(u-boot-env),"\
  69                                         "4m(kernel),-(fs)"
  70
  71 #if defined(CONFIG_CMD_NAND)
  72 /* NAND: SPL falcon mode configs */
  73 #ifdef CONFIG_SPL_OS_BOOT
  74 #define CONFIG_CMD_SPL_NAND_OFS         0x240000
  75 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
  76 #define CONFIG_CMD_SPL_WRITE_SIZE       0x2000
  77 #endif
  78 #define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */
  79 #endif
  80
  81 #undef CONFIG_CMD_FLASH         /* flinfo, erase, protect       */
  82 #undef CONFIG_CMD_FPGA          /* FPGA configuration Support   */
  83 #undef CONFIG_CMD_IMI           /* iminfo                       */
  84 #undef CONFIG_CMD_IMLS          /* List all found images        */
  85 #define CONFIG_CMD_NET          /* bootp, tftpboot, rarpboot    */
  86 #define CONFIG_CMD_NFS          /* NFS support                  */
  87 #define CONFIG_CMD_PING
  88 #define CONFIG_CMD_DHCP
  89
  90 #undef CONFIG_SYS_I2C_OMAP24XX
  91 #define CONFIG_SYS_I2C_OMAP34XX
  92
  93 /*
  94  * TWL4030
  95  */
  96 #define CONFIG_TWL4030_LED              1
  97
  98 /*
  99  * Board NAND Info.
 100  */
 101 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
 102                                                         /* to access nand */
 103 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 104                                                         /* to access nand at */
 105                                                         /* CS0 */
 106 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT  16
 107
 108 /* Environment information */
 109
 110 #define CONFIG_EXTRA_ENV_SETTINGS \
 111         "loadaddr=0x82000000\0" \
 112         "fdtaddr=0x80f80000\0" \
 113         "bootfile=uImage\0" \
 114         "fdtfile=omap3-ldp.dtb\0" \
 115         "bootdir=/\0" \
 116         "bootpart=0:1\0" \
 117         "usbtty=cdc_acm\0" \
 118         "console=ttyO2,115200n8\0" \
 119         "mmcdev=0\0" \
 120         "videomode=1024x768@60,vxres=1024,vyres=768\0" \
 121         "videospec=omapfb:vram:2M,vram:4M\0" \
 122         "mmcargs=setenv bootargs console=${console} " \
 123                 "video=${videospec},mode:${videomode} " \
 124                 "root=/dev/mmcblk0p2 rw " \
 125                 "rootfstype=ext3 rootwait\0" \
 126         "nandargs=setenv bootargs console=${console} " \
 127                 "video=${videospec},mode:${videomode} " \
 128                 "root=/dev/mtdblock4 rw " \
 129                 "rootfstype=jffs2\0" \
 130         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 131         "bootscript=echo Running bootscript from mmc ...; " \
 132                 "source ${loadaddr}\0" \
 133         "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
 134         "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
 135         "loadzimage=setenv bootfile zImage; if run loadimage; then run loadfdt;fi\0"\
 136         "mmcboot=echo Booting from mmc ...; " \
 137                 "run mmcargs; " \
 138                 "bootm ${loadaddr}\0" \
 139         "mmczboot=echo Booting from mmc ...; " \
 140                 "run mmcargs; " \
 141                 "bootz ${loadaddr} - ${fdtaddr}\0" \
 142         "nandboot=echo Booting from nand ...; " \
 143                 "run nandargs; " \
 144                 "nand read ${loadaddr} 280000 400000; " \
 145                 "bootm ${loadaddr}\0" \
 146
 147 #define CONFIG_BOOTCOMMAND \
 148         "mmc dev ${mmcdev}; if mmc rescan; then " \
 149                 "if run loadbootscript; then " \
 150                         "run bootscript; " \
 151                 "else " \
 152                         "if run loadimage; then " \
 153                                 "run mmcboot; " \
 154                         "else if run loadzimage; then " \
 155                                 "run mmczboot; " \
 156                         "else run nandboot; " \
 157                         "fi; fi;" \
 158                 "fi; " \
 159         "else run nandboot; fi"
 160
 161 /*
 162  * Miscellaneous configurable options
 163  */
 164 #define CONFIG_SYS_MEMTEST_START        (PHYS_SDRAM_1)  /* memtest */
 165 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_2 + \
 166                                         0x01F00000) /* 31MB */
 167
 168 /*-----------------------------------------------------------------------
 169  * FLASH and environment organization
 170  */
 171
 172 /* **** PISMO SUPPORT *** */
 173 #if defined(CONFIG_CMD_NAND)
 174 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
 175 #endif
 176
 177 /* Monitor at start of flash */
 178 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 179 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 180
 181 #define CONFIG_ENV_IS_IN_NAND           1
 182 #define ONENAND_ENV_OFFSET              0x260000 /* environment starts here */
 183 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
 184
 185 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 186 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 187 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
 188
 189 #define CONFIG_SYS_CACHELINE_SIZE       64
 190
 191 #ifdef CONFIG_CMD_NET
 192 /* Ethernet (LAN9211 from SMSC9118 family) */
 193 #define CONFIG_SMC911X
 194 #define CONFIG_SMC911X_32_BIT
 195 #define CONFIG_SMC911X_BASE             DEBUG_BASE
 196
 197 #endif
 198
 199 #endif                          /* __CONFIG_H */