include/configs/omap3_zoom1.h

   1 /*
   2  * (C) Copyright 2006-2008
   3  * Texas Instruments.
   4  * Richard Woodruff <r-woodruff2@ti.com>
   5  * Syed Mohammed Khasim <x0khasim@ti.com>
   6  * Nishanth Menon <nm@ti.com>
   7  *
   8  * Configuration settings for the TI OMAP3430 Zoom MDK board.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 /*
  17  * High Level Configuration Options
  18  */
  19 #define CONFIG_OMAP3_ZOOM1      1       /* working with Zoom MDK Rev1 */
  20
  21 #define CONFIG_NAND
  22 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
  23 #include <asm/arch/cpu.h>               /* get chip and board defs */
  24 #include <asm/arch/omap.h>
  25 #include <configs/ti_omap3_common.h>
  26
  27 /* Remove SPL boot option - we do not support that on LDP yet */
  28 #undef CONFIG_SPL_FRAMEWORK
  29
  30 /* Generic NAND definition conflicts with debug_base */
  31 #undef CONFIG_SYS_NAND_BASE
  32
  33 #define CONFIG_MISC_INIT_R
  34
  35 #define CONFIG_REVISION_TAG             1
  36
  37 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB */
  38
  39 /*
  40  * Hardware drivers
  41  */
  42
  43 /* USB */
  44 #define CONFIG_USB_MUSB_UDC                     1
  45 #define CONFIG_USB_OMAP3                1
  46 #define CONFIG_TWL4030_USB              1
  47
  48 /* USB device configuration */
  49 #define CONFIG_USB_DEVICE               1
  50 #define CONFIG_USB_TTY                  1
  51 /* Change these to suit your needs */
  52 #define CONFIG_USBD_VENDORID            0x0451
  53 #define CONFIG_USBD_PRODUCTID           0x5678
  54 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
  55 #define CONFIG_USBD_PRODUCT_NAME        "Zoom1"
  56
  57 #define MTDIDS_DEFAULT                  "nand0=nand"
  58 #define MTDPARTS_DEFAULT                "mtdparts=nand:512k(x-loader),"\
  59                                         "1920k(u-boot),128k(u-boot-env),"\
  60                                         "4m(kernel),-(fs)"
  61
  62 #if defined(CONFIG_CMD_NAND)
  63 /* NAND: SPL falcon mode configs */
  64 #ifdef CONFIG_SPL_OS_BOOT
  65 #define CONFIG_CMD_SPL_NAND_OFS         0x240000
  66 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
  67 #define CONFIG_CMD_SPL_WRITE_SIZE       0x2000
  68 #endif
  69 #define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */
  70 #endif
  71
  72 #undef CONFIG_SYS_I2C_OMAP24XX
  73 #define CONFIG_SYS_I2C_OMAP34XX
  74
  75 /*
  76  * TWL4030
  77  */
  78 #define CONFIG_TWL4030_LED              1
  79
  80 /*
  81  * Board NAND Info.
  82  */
  83 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
  84                                                         /* to access nand */
  85 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
  86                                                         /* to access nand at */
  87                                                         /* CS0 */
  88 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
  89
  90 /* Environment information */
  91
  92 #define CONFIG_EXTRA_ENV_SETTINGS \
  93         "loadaddr=0x82000000\0" \
  94         "fdtaddr=0x80f80000\0" \
  95         "bootfile=uImage\0" \
  96         "fdtfile=omap3-ldp.dtb\0" \
  97         "bootdir=/\0" \
  98         "bootpart=0:1\0" \
  99         "usbtty=cdc_acm\0" \
 100         "console=ttyO2,115200n8\0" \
 101         "mmcdev=0\0" \
 102         "videomode=1024x768@60,vxres=1024,vyres=768\0" \
 103         "videospec=omapfb:vram:2M,vram:4M\0" \
 104         "mmcargs=setenv bootargs console=${console} " \
 105                 "video=${videospec},mode:${videomode} " \
 106                 "root=/dev/mmcblk0p2 rw " \
 107                 "rootfstype=ext3 rootwait\0" \
 108         "nandargs=setenv bootargs console=${console} " \
 109                 "video=${videospec},mode:${videomode} " \
 110                 "root=/dev/mtdblock4 rw " \
 111                 "rootfstype=jffs2\0" \
 112         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 113         "bootscript=echo Running bootscript from mmc ...; " \
 114                 "source ${loadaddr}\0" \
 115         "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
 116         "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
 117         "loadzimage=setenv bootfile zImage; if run loadimage; then run loadfdt;fi\0"\
 118         "mmcboot=echo Booting from mmc ...; " \
 119                 "run mmcargs; " \
 120                 "bootm ${loadaddr}\0" \
 121         "mmczboot=echo Booting from mmc ...; " \
 122                 "run mmcargs; " \
 123                 "bootz ${loadaddr} - ${fdtaddr}\0" \
 124         "nandboot=echo Booting from nand ...; " \
 125                 "run nandargs; " \
 126                 "nand read ${loadaddr} 280000 400000; " \
 127                 "bootm ${loadaddr}\0" \
 128
 129 #define CONFIG_BOOTCOMMAND \
 130         "mmc dev ${mmcdev}; if mmc rescan; then " \
 131                 "if run loadbootscript; then " \
 132                         "run bootscript; " \
 133                 "else " \
 134                         "if run loadimage; then " \
 135                                 "run mmcboot; " \
 136                         "else if run loadzimage; then " \
 137                                 "run mmczboot; " \
 138                         "else run nandboot; " \
 139                         "fi; fi;" \
 140                 "fi; " \
 141         "else run nandboot; fi"
 142
 143 /*
 144  * Miscellaneous configurable options
 145  */
 146 #define CONFIG_SYS_MEMTEST_START        (PHYS_SDRAM_1)  /* memtest */
 147 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_2 + \
 148                                         0x01F00000) /* 31MB */
 149
 150 /*-----------------------------------------------------------------------
 151  * FLASH and environment organization
 152  */
 153
 154 /* **** PISMO SUPPORT *** */
 155 #if defined(CONFIG_CMD_NAND)
 156 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
 157 #endif
 158
 159 /* Monitor at start of flash */
 160 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 161 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 162
 163 #define CONFIG_ENV_IS_IN_NAND           1
 164 #define ONENAND_ENV_OFFSET              0x260000 /* environment starts here */
 165 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
 166
 167 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 168 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 169 #define CONFIG_ENV_ADDR                 SMNAND_ENV_OFFSET
 170
 171 #ifdef CONFIG_CMD_NET
 172 /* Ethernet (LAN9211 from SMSC9118 family) */
 173 #define CONFIG_SMC911X
 174 #define CONFIG_SMC911X_32_BIT
 175 #define CONFIG_SMC911X_BASE             DEBUG_BASE
 176
 177 #endif
 178
 179 #endif                          /* __CONFIG_H */