include/configs/omap5_uevm.h

   1 /*
   2  * (C) Copyright 2013
   3  * Texas Instruments Incorporated.
   4  * Sricharan R    <r.sricharan@ti.com>
   5  *
   6  * Configuration settings for the TI EVM5430 board.
   7  * See ti_omap5_common.h for omap5 common settings.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __CONFIG_OMAP5_EVM_H
  13 #define __CONFIG_OMAP5_EVM_H
  14
  15 #include <environment/ti/dfu.h>
  16
  17 #ifndef CONFIG_SPL_BUILD
  18 /* Define the default GPT table for eMMC */
  19 #define PARTS_DEFAULT \
  20         "uuid_disk=${uuid_gpt_disk};" \
  21         "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
  22 #endif
  23
  24 #define DFUARGS \
  25         "dfu_bufsiz=0x10000\0" \
  26         DFU_ALT_INFO_MMC \
  27         DFU_ALT_INFO_EMMC \
  28         DFU_ALT_INFO_RAM
  29
  30 #include <configs/ti_omap5_common.h>
  31
  32 #define CONFIG_CONS_INDEX               3
  33 #define CONFIG_SYS_NS16550_COM3         UART3_BASE
  34 #define CONFIG_BAUDRATE                 115200
  35
  36 #define CONFIG_MISC_INIT_R
  37 /* MMC ENV related defines */
  38 #define CONFIG_ENV_IS_IN_MMC
  39 #define CONFIG_SYS_MMC_ENV_DEV          1       /* SLOT2: eMMC(1) */
  40 #define CONFIG_ENV_SIZE                 (128 << 10)
  41 #define CONFIG_ENV_OFFSET               0xE0000
  42 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
  43 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
  44
  45 /* Enhance our eMMC support / experience. */
  46 #define CONFIG_HSMMC2_8BIT
  47 #define CONFIG_SUPPORT_EMMC_BOOT
  48
  49 /* Required support for the TCA642X GPIO we have on the uEVM */
  50 #define CONFIG_TCA642X
  51 #define CONFIG_CMD_TCA642X
  52 #define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4
  53 #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
  54
  55 /* USB UHH support options */
  56 #define CONFIG_USB_EHCI
  57 #define CONFIG_USB_EHCI_OMAP
  58 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
  59 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  60
  61 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80
  62 #define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79
  63
  64 /* Enabled commands */
  65
  66 /* USB Networking options */
  67 #define CONFIG_USB_HOST_ETHER
  68 #define CONFIG_USB_ETHER_SMSC95XX
  69
  70 #define CONSOLEDEV              "ttyO2"
  71
  72 /* Max time to hold reset on this board, see doc/README.omap-reset-time */
  73 #define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC        16296
  74
  75 #define CONFIG_SCSI
  76 #define CONFIG_LIBATA
  77 #define CONFIG_SCSI_AHCI
  78 #define CONFIG_SCSI_AHCI_PLAT
  79 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     1
  80 #define CONFIG_SYS_SCSI_MAX_LUN         1
  81 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  82                                                 CONFIG_SYS_SCSI_MAX_LUN)
  83
  84 #endif /* __CONFIG_OMAP5_EVM_H */