include/configs/openrd.h

   1 /*
   2  * (C) Copyright 2009
   3  * Net Insight <www.netinsight.net>
   4  * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
   5  *
   6  * Based on sheevaplug.h:
   7  * (C) Copyright 2009
   8  * Marvell Semiconductor <www.marvell.com>
   9  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
  10  *
  11  * SPDX-License-Identifier:     GPL-2.0+
  12  */
  13
  14 #ifndef _CONFIG_OPENRD_H
  15 #define _CONFIG_OPENRD_H
  16
  17 /*
  18  * High Level Configuration Options (easy to change)
  19  */
  20 #define CONFIG_SHEEVA_88SV131   1       /* CPU Core subversion */
  21 #define CONFIG_KW88F6281        1       /* SOC Name */
  22 #define CONFIG_MACH_OPENRD_BASE /* Machine type */
  23 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  24 #define CONFIG_SYS_THUMB_BUILD
  25
  26 /*
  27  * Commands configuration
  28  */
  29 #define CONFIG_SYS_MVFS
  30 #define CONFIG_CMD_ENV
  31 #define CONFIG_CMD_NAND
  32 #define CONFIG_CMD_IDE
  33
  34 /*
  35  * mv-common.h should be defined after CMD configs since it used them
  36  * to enable certain macros
  37  */
  38 #include "mv-common.h"
  39
  40 /*
  41  *  Environment variables configurations
  42  */
  43 #ifdef CONFIG_CMD_NAND
  44 #define CONFIG_ENV_IS_IN_NAND           1
  45 #define CONFIG_ENV_SECT_SIZE            0x20000 /* 128K */
  46 #else
  47 #define CONFIG_ENV_IS_NOWHERE           1       /* if env in SDRAM */
  48 #endif
  49 /*
  50  * max 4k env size is enough, but in case of nand
  51  * it has to be rounded to sector size
  52  */
  53 #define CONFIG_ENV_SIZE                 0x20000 /* 128k */
  54 #define CONFIG_ENV_ADDR                 0x60000
  55 #define CONFIG_ENV_OFFSET               0x60000 /* env starts here */
  56 /*
  57  * Environment is right behind U-Boot in flash. Make sure U-Boot
  58  * doesn't grow into the environment area.
  59  */
  60 #define CONFIG_BOARD_SIZE_LIMIT         CONFIG_ENV_OFFSET
  61
  62 /*
  63  * Default environment variables
  64  */
  65 #define CONFIG_BOOTCOMMAND              "${x_bootcmd_kernel}; " \
  66         "setenv bootargs ${x_bootargs} ${x_bootargs_root}; "    \
  67         "${x_bootcmd_usb}; bootm 0x6400000;"
  68
  69 #define MTDIDS_DEFAULT          "nand0=nand_mtd"
  70 #define MTDPARTS_DEFAULT        "mtdparts=nand_mtd:0x100000@0x000000(uboot),"\
  71         "0x400000@0x100000(uImage),"\
  72         "0x1fb00000@0x500000(rootfs)"
  73
  74 #define CONFIG_EXTRA_ENV_SETTINGS       "x_bootargs=console"            \
  75         "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0"         \
  76         "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0"      \
  77         "x_bootcmd_usb=usb start\0"                                     \
  78         "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0"           \
  79         "mtdids="MTDIDS_DEFAULT"\0"                                     \
  80         "mtdparts="MTDPARTS_DEFAULT"\0"
  81
  82 /*
  83  * Ethernet Driver configuration
  84  */
  85 #ifdef CONFIG_CMD_NET
  86 # ifdef CONFIG_BOARD_IS_OPENRD_BASE
  87 #  define CONFIG_MVGBE_PORTS    {1, 0}  /* enable port 0 only */
  88 # else
  89 #  define CONFIG_MVGBE_PORTS    {1, 1}  /* enable both ports */
  90 # endif
  91 # ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
  92 #  define CONFIG_PHY_BASE_ADR   0x0
  93 #  define PHY_NO                "88E1121"
  94 # else
  95 #  define CONFIG_PHY_BASE_ADR   0x8
  96 #  define PHY_NO                "88E1116"
  97 # endif
  98 #endif /* CONFIG_CMD_NET */
  99
 100 /*
 101  * SATA Driver configuration
 102  */
 103 #ifdef CONFIG_MVSATA_IDE
 104 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
 105 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
 106 #endif /*CONFIG_MVSATA_IDE*/
 107
 108 #ifdef CONFIG_CMD_MMC
 109 #define CONFIG_MVEBU_MMC
 110 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
 111 #endif /* CONFIG_CMD_MMC */
 112
 113 #endif /* _CONFIG_OPENRD_BASE_H */