include/configs/ot1200.h

   1 /*
   2  * Copyright (C) 2010-2013 Freescale Semiconductor, Inc.
   3  * Copyright (C) 2014 Bachmann electronic GmbH
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #include "mx6_common.h"
  12 #define CONFIG_MX6
  13 #define CONFIG_DISPLAY_CPUINFO
  14 #define CONFIG_DISPLAY_BOARDINFO
  15
  16 #include <asm/arch/imx-regs.h>
  17 #include <asm/imx-common/gpio.h>
  18
  19 #define CONFIG_CMDLINE_TAG
  20 #define CONFIG_SETUP_MEMORY_TAGS
  21 #define CONFIG_INITRD_TAG
  22 #define CONFIG_REVISION_TAG
  23 #define CONFIG_SYS_GENERIC_BOARD
  24
  25 /* Size of malloc() pool */
  26 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  27
  28 #define CONFIG_BOARD_EARLY_INIT_F
  29 #define CONFIG_MISC_INIT_R
  30 #define CONFIG_MXC_GPIO
  31
  32 /* FUSE Configs */
  33 #define CONFIG_CMD_FUSE
  34 #define CONFIG_MXC_OCOTP
  35
  36 /* UART Configs */
  37 #define CONFIG_MXC_UART
  38 #define CONFIG_MXC_UART_BASE           UART1_BASE
  39
  40 /* SF Configs */
  41 #define CONFIG_CMD_SF
  42 #define CONFIG_SPI
  43 #define CONFIG_SPI_FLASH
  44 #define CONFIG_SPI_FLASH_STMICRO
  45 #define CONFIG_SPI_FLASH_WINBOND
  46 #define CONFIG_SPI_FLASH_MACRONIX
  47 #define CONFIG_SPI_FLASH_SST
  48 #define CONFIG_MXC_SPI
  49 #define CONFIG_SF_DEFAULT_BUS  2
  50 #define CONFIG_SF_DEFAULT_CS   0
  51 #define CONFIG_SF_DEFAULT_SPEED 25000000
  52 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
  53
  54 /* IO expander */
  55 #define CONFIG_PCA953X
  56 #define CONFIG_SYS_I2C_PCA953X_ADDR     0x20
  57 #define CONFIG_SYS_I2C_PCA953X_WIDTH    { {0x20, 16} }
  58 #define CONFIG_CMD_PCA953X
  59 #define CONFIG_CMD_PCA953X_INFO
  60
  61 /* I2C Configs */
  62 #define CONFIG_CMD_I2C
  63 #define CONFIG_SYS_I2C
  64 #define CONFIG_SYS_I2C_MXC
  65 #define CONFIG_SYS_I2C_SPEED            100000
  66
  67 /* OCOTP Configs */
  68 #define CONFIG_CMD_IMXOTP
  69 #define CONFIG_IMX_OTP
  70 #define IMX_OTP_BASE                    OCOTP_BASE_ADDR
  71 #define IMX_OTP_ADDR_MAX                0x7F
  72 #define IMX_OTP_DATA_ERROR_VAL          0xBADABADA
  73 #define IMX_OTPWRITE_ENABLED
  74
  75 /* MMC Configs */
  76 #define CONFIG_FSL_ESDHC
  77 #define CONFIG_FSL_USDHC
  78 #define CONFIG_SYS_FSL_ESDHC_ADDR      0
  79 #define CONFIG_SYS_FSL_USDHC_NUM       2
  80
  81 #define CONFIG_MMC
  82 #define CONFIG_CMD_MMC
  83 #define CONFIG_GENERIC_MMC
  84 #define CONFIG_BOUNCE_BUFFER
  85
  86 /* USB Configs */
  87 #define CONFIG_CMD_USB
  88 #define CONFIG_USB_STORAGE
  89 #define CONFIG_USB_EHCI
  90 #define CONFIG_USB_EHCI_MX6
  91 #define CONFIG_MXC_USB_PORTSC   (PORT_PTS_UTMI | PORT_PTS_PTW)
  92 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  93
  94 #ifdef CONFIG_MX6Q
  95 #define CONFIG_CMD_SATA
  96 #endif
  97
  98 /*
  99  * SATA Configs
 100  */
 101 #ifdef CONFIG_CMD_SATA
 102 #define CONFIG_DWC_AHSATA
 103 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 104 #define CONFIG_DWC_AHSATA_PORT_ID       0
 105 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 106 #define CONFIG_LBA48
 107 #define CONFIG_LIBATA
 108 #endif
 109
 110
 111 /* SPL */
 112 #ifdef CONFIG_SPL
 113 #include "imx6_spl.h"
 114 #define CONFIG_SPL_SPI_SUPPORT
 115 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 116 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 117 #define CONFIG_SYS_SPI_U_BOOT_OFFS     (64 * 1024)
 118 #define CONFIG_SPL_SPI_LOAD
 119 #endif
 120
 121 #define CONFIG_CMD_PING
 122 #define CONFIG_CMD_DHCP
 123 #define CONFIG_CMD_MII
 124 #define CONFIG_CMD_NET
 125 #define CONFIG_FEC_MXC
 126 #define CONFIG_MII
 127 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 128 #define CONFIG_FEC_XCV_TYPE             MII100
 129 #define CONFIG_ETHPRIME                 "FEC"
 130 #define CONFIG_FEC_MXC_PHYADDR          0x5
 131 #define CONFIG_PHYLIB
 132 #define CONFIG_PHY_SMSC
 133
 134 #ifndef CONFIG_SPL
 135 #define CONFIG_CMD_EEPROM
 136 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 137 #define CONFIG_SYS_I2C_EEPROM_BUS             1
 138 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN        1
 139 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS     3
 140 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 141 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 142 #endif
 143
 144 /* Miscellaneous commands */
 145 #define CONFIG_CMD_BMODE
 146 #define CONFIG_CMD_SETEXPR
 147
 148 /* allow to overwrite serial and ethaddr */
 149 #define CONFIG_ENV_OVERWRITE
 150 #define CONFIG_CONS_INDEX              1
 151 #define CONFIG_BAUDRATE                115200
 152
 153 /* Command definition */
 154 #include <config_cmd_default.h>
 155
 156 #undef CONFIG_CMD_IMLS
 157
 158 #define CONFIG_BOOTDELAY               2
 159
 160 #define CONFIG_PREBOOT                 ""
 161
 162 #define CONFIG_LOADADDR                0x12000000
 163 #define CONFIG_SYS_TEXT_BASE           0x17800000
 164
 165 /* Miscellaneous configurable options */
 166 #define CONFIG_SYS_LONGHELP
 167 #define CONFIG_SYS_HUSH_PARSER
 168 #define CONFIG_SYS_CBSIZE              1024
 169
 170 /* Print Buffer Size */
 171 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 172 #define CONFIG_SYS_MAXARGS             16
 173 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 174
 175 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
 176
 177 #define CONFIG_CMDLINE_EDITING
 178
 179 /* Physical Memory Map */
 180 #define CONFIG_NR_DRAM_BANKS           1
 181 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 182
 183 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 184 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 185 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 186
 187 #define CONFIG_SYS_INIT_SP_OFFSET \
 188         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 189 #define CONFIG_SYS_INIT_SP_ADDR \
 190         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 191
 192 /* FLASH and environment organization */
 193 #define CONFIG_SYS_NO_FLASH
 194
 195 #define CONFIG_ENV_IS_IN_SPI_FLASH
 196 #define CONFIG_ENV_SIZE                 (64 * 1024)     /* 64 kb */
 197 #define CONFIG_ENV_OFFSET               (1024 * 1024)
 198 /* M25P16 has an erase size of 64 KiB */
 199 #define CONFIG_ENV_SECT_SIZE            (64 * 1024)
 200 #define CONFIG_ENV_SPI_BUS              CONFIG_SF_DEFAULT_BUS
 201 #define CONFIG_ENV_SPI_CS               CONFIG_SF_DEFAULT_CS
 202 #define CONFIG_ENV_SPI_MODE             CONFIG_SF_DEFAULT_MODE
 203 #define CONFIG_ENV_SPI_MAX_HZ           CONFIG_SF_DEFAULT_SPEED
 204
 205 #define CONFIG_OF_LIBFDT
 206 #define CONFIG_CMD_BOOTZ
 207
 208 #ifndef CONFIG_SYS_DCACHE_OFF
 209 #define CONFIG_CMD_CACHE
 210 #endif
 211
 212 #define CONFIG_CMD_BOOTZ
 213 #define CONFIG_SUPPORT_RAW_INITRD
 214
 215 /* FS Configs */
 216 #define CONFIG_CMD_EXT3
 217 #define CONFIG_CMD_EXT4
 218 #define CONFIG_DOS_PARTITION
 219 #define CONFIG_CMD_FS_GENERIC
 220 #define CONFIG_LIB_UUID
 221 #define CONFIG_CMD_FS_UUID
 222
 223 #define CONFIG_BOOTP_SERVERIP
 224 #define CONFIG_BOOTP_BOOTFILE
 225
 226 #endif         /* __CONFIG_H */