include/configs/p1_p2_rdb_pc.h

   1 /*
   2  * Copyright 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * QorIQ RDB boards configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_SYS_GENERIC_BOARD
  14 #define CONFIG_DISPLAY_BOARDINFO
  15
  16 #ifdef CONFIG_36BIT
  17 #define CONFIG_PHYS_64BIT
  18 #endif
  19
  20 #if defined(CONFIG_P1020MBG)
  21 #define CONFIG_BOARDNAME "P1020MBG-PC"
  22 #define CONFIG_P1020
  23 #define CONFIG_VSC7385_ENET
  24 #define CONFIG_SLIC
  25 #define __SW_BOOT_MASK          0x03
  26 #define __SW_BOOT_NOR           0xe4
  27 #define __SW_BOOT_SD            0x54
  28 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  29 #endif
  30
  31 #if defined(CONFIG_P1020UTM)
  32 #define CONFIG_BOARDNAME "P1020UTM-PC"
  33 #define CONFIG_P1020
  34 #define __SW_BOOT_MASK          0x03
  35 #define __SW_BOOT_NOR           0xe0
  36 #define __SW_BOOT_SD            0x50
  37 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  38 #endif
  39
  40 #if defined(CONFIG_P1020RDB_PC)
  41 #define CONFIG_BOARDNAME "P1020RDB-PC"
  42 #define CONFIG_NAND_FSL_ELBC
  43 #define CONFIG_P1020
  44 #define CONFIG_SPI_FLASH
  45 #define CONFIG_VSC7385_ENET
  46 #define CONFIG_SLIC
  47 #define __SW_BOOT_MASK          0x03
  48 #define __SW_BOOT_NOR           0x5c
  49 #define __SW_BOOT_SPI           0x1c
  50 #define __SW_BOOT_SD            0x9c
  51 #define __SW_BOOT_NAND          0xec
  52 #define __SW_BOOT_PCIE          0x6c
  53 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  54 #endif
  55
  56 /*
  57  * P1020RDB-PD board has user selectable switches for evaluating different
  58  * frequency and boot options for the P1020 device. The table that
  59  * follow describe the available options. The front six binary number was in
  60  * accordance with SW3[1:6].
  61  * 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off
  62  * 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off
  63  * 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off
  64  * 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off
  65  * 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off
  66  * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off
  67  * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off
  68  */
  69 #if defined(CONFIG_P1020RDB_PD)
  70 #define CONFIG_BOARDNAME "P1020RDB-PD"
  71 #define CONFIG_NAND_FSL_ELBC
  72 #define CONFIG_P1020
  73 #define CONFIG_SPI_FLASH
  74 #define CONFIG_VSC7385_ENET
  75 #define CONFIG_SLIC
  76 #define __SW_BOOT_MASK          0x03
  77 #define __SW_BOOT_NOR           0x64
  78 #define __SW_BOOT_SPI           0x34
  79 #define __SW_BOOT_SD            0x24
  80 #define __SW_BOOT_NAND          0x44
  81 #define __SW_BOOT_PCIE          0x74
  82 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  83 /*
  84  * Dynamic MTD Partition support with mtdparts
  85  */
  86 #define CONFIG_MTD_DEVICE
  87 #define CONFIG_MTD_PARTITIONS
  88 #define CONFIG_CMD_MTDPARTS
  89 #define CONFIG_FLASH_CFI_MTD
  90 #define MTDIDS_DEFAULT "nor0=ec000000.nor"
  91 #define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:128k(dtb),6016k(kernel)," \
  92                         "57088k(fs),1m(vsc7385-firmware),1280k(u-boot)"
  93 #endif
  94
  95 #if defined(CONFIG_P1021RDB)
  96 #define CONFIG_BOARDNAME "P1021RDB-PC"
  97 #define CONFIG_NAND_FSL_ELBC
  98 #define CONFIG_P1021
  99 #define CONFIG_QE
 100 #define CONFIG_SPI_FLASH
 101 #define CONFIG_VSC7385_ENET
 102 #define CONFIG_SYS_LBC_LBCR     0x00080000      /* Implement conversion of
 103                                                 addresses in the LBC */
 104 #define __SW_BOOT_MASK          0x03
 105 #define __SW_BOOT_NOR           0x5c
 106 #define __SW_BOOT_SPI           0x1c
 107 #define __SW_BOOT_SD            0x9c
 108 #define __SW_BOOT_NAND          0xec
 109 #define __SW_BOOT_PCIE          0x6c
 110 #define CONFIG_SYS_L2_SIZE      (256 << 10)
 111 /*
 112  * Dynamic MTD Partition support with mtdparts
 113  */
 114 #define CONFIG_MTD_DEVICE
 115 #define CONFIG_MTD_PARTITIONS
 116 #define CONFIG_CMD_MTDPARTS
 117 #define CONFIG_FLASH_CFI_MTD
 118 #ifdef CONFIG_PHYS_64BIT
 119 #define MTDIDS_DEFAULT "nor0=fef000000.nor"
 120 #define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \
 121                         "256k(dtb),4608k(kernel),9728k(fs)," \
 122                         "256k(qe-ucode-firmware),1280k(u-boot)"
 123 #else
 124 #define MTDIDS_DEFAULT "nor0=ef000000.nor"
 125 #define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \
 126                         "256k(dtb),4608k(kernel),9728k(fs)," \
 127                         "256k(qe-ucode-firmware),1280k(u-boot)"
 128 #endif
 129 #endif
 130
 131 #if defined(CONFIG_P1024RDB)
 132 #define CONFIG_BOARDNAME "P1024RDB"
 133 #define CONFIG_NAND_FSL_ELBC
 134 #define CONFIG_P1024
 135 #define CONFIG_SLIC
 136 #define CONFIG_SPI_FLASH
 137 #define __SW_BOOT_MASK          0xf3
 138 #define __SW_BOOT_NOR           0x00
 139 #define __SW_BOOT_SPI           0x08
 140 #define __SW_BOOT_SD            0x04
 141 #define __SW_BOOT_NAND          0x0c
 142 #define CONFIG_SYS_L2_SIZE      (256 << 10)
 143 #endif
 144
 145 #if defined(CONFIG_P1025RDB)
 146 #define CONFIG_BOARDNAME "P1025RDB"
 147 #define CONFIG_NAND_FSL_ELBC
 148 #define CONFIG_P1025
 149 #define CONFIG_QE
 150 #define CONFIG_SLIC
 151 #define CONFIG_SPI_FLASH
 152
 153 #define CONFIG_SYS_LBC_LBCR     0x00080000      /* Implement conversion of
 154                                                 addresses in the LBC */
 155 #define __SW_BOOT_MASK          0xf3
 156 #define __SW_BOOT_NOR           0x00
 157 #define __SW_BOOT_SPI           0x08
 158 #define __SW_BOOT_SD            0x04
 159 #define __SW_BOOT_NAND          0x0c
 160 #define CONFIG_SYS_L2_SIZE      (256 << 10)
 161 #endif
 162
 163 #if defined(CONFIG_P2020RDB)
 164 #define CONFIG_BOARDNAME "P2020RDB-PCA"
 165 #define CONFIG_NAND_FSL_ELBC
 166 #define CONFIG_P2020
 167 #define CONFIG_SPI_FLASH
 168 #define CONFIG_VSC7385_ENET
 169 #define __SW_BOOT_MASK          0x03
 170 #define __SW_BOOT_NOR           0xc8
 171 #define __SW_BOOT_SPI           0x28
 172 #define __SW_BOOT_SD            0x68 /* or 0x18 */
 173 #define __SW_BOOT_NAND          0xe8
 174 #define __SW_BOOT_PCIE          0xa8
 175 #define CONFIG_SYS_L2_SIZE      (512 << 10)
 176 /*
 177  * Dynamic MTD Partition support with mtdparts
 178  */
 179 #define CONFIG_MTD_DEVICE
 180 #define CONFIG_MTD_PARTITIONS
 181 #define CONFIG_CMD_MTDPARTS
 182 #define CONFIG_FLASH_CFI_MTD
 183 #ifdef CONFIG_PHYS_64BIT
 184 #define MTDIDS_DEFAULT "nor0=fef000000.nor"
 185 #define MTDPARTS_DEFAULT "mtdparts=fef000000.nor:256k(vsc7385-firmware)," \
 186                         "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)"
 187 #else
 188 #define MTDIDS_DEFAULT "nor0=ef000000.nor"
 189 #define MTDPARTS_DEFAULT "mtdparts=ef000000.nor:256k(vsc7385-firmware)," \
 190                         "256k(dtb),4608k(kernel),9984k(fs),1280k(u-boot)"
 191 #endif
 192 #endif
 193
 194 #ifdef CONFIG_SDCARD
 195 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 196 #define CONFIG_SPL_ENV_SUPPORT
 197 #define CONFIG_SPL_SERIAL_SUPPORT
 198 #define CONFIG_SPL_MMC_SUPPORT
 199 #define CONFIG_SPL_MMC_MINIMAL
 200 #define CONFIG_SPL_FLUSH_IMAGE
 201 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 202 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 203 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 204 #define CONFIG_SPL_I2C_SUPPORT
 205 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
 206 #define CONFIG_SYS_TEXT_BASE            0x11001000
 207 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
 208 #define CONFIG_SPL_PAD_TO               0x20000
 209 #define CONFIG_SPL_MAX_SIZE             (128 * 1024)
 210 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 211 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x11000000)
 212 #define CONFIG_SYS_MMC_U_BOOT_START     (0x11000000)
 213 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (128 << 10)
 214 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 215 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 216 #define CONFIG_SPL_MMC_BOOT
 217 #ifdef CONFIG_SPL_BUILD
 218 #define CONFIG_SPL_COMMON_INIT_DDR
 219 #endif
 220 #endif
 221
 222 #ifdef CONFIG_SPIFLASH
 223 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 224 #define CONFIG_SPL_ENV_SUPPORT
 225 #define CONFIG_SPL_SERIAL_SUPPORT
 226 #define CONFIG_SPL_SPI_SUPPORT
 227 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 228 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 229 #define CONFIG_SPL_FLUSH_IMAGE
 230 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 231 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 232 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 233 #define CONFIG_SPL_I2C_SUPPORT
 234 #define CONFIG_FSL_LAW         /* Use common FSL init code */
 235 #define CONFIG_SYS_TEXT_BASE            0x11001000
 236 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
 237 #define CONFIG_SPL_PAD_TO               0x20000
 238 #define CONFIG_SPL_MAX_SIZE             (128 * 1024)
 239 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
 240 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x11000000)
 241 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x11000000)
 242 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (128 << 10)
 243 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 244 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 245 #define CONFIG_SPL_SPI_BOOT
 246 #ifdef CONFIG_SPL_BUILD
 247 #define CONFIG_SPL_COMMON_INIT_DDR
 248 #endif
 249 #endif
 250
 251 #ifdef CONFIG_NAND
 252 #ifdef CONFIG_TPL_BUILD
 253 #define CONFIG_SPL_NAND_BOOT
 254 #define CONFIG_SPL_FLUSH_IMAGE
 255 #define CONFIG_SPL_ENV_SUPPORT
 256 #define CONFIG_SPL_NAND_INIT
 257 #define CONFIG_SPL_SERIAL_SUPPORT
 258 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 259 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 260 #define CONFIG_SPL_I2C_SUPPORT
 261 #define CONFIG_SPL_NAND_SUPPORT
 262 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 263 #define CONFIG_SPL_COMMON_INIT_DDR
 264 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
 265 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
 266 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 267 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (832 << 10)
 268 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
 269 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
 270 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
 271 #elif defined(CONFIG_SPL_BUILD)
 272 #define CONFIG_SPL_INIT_MINIMAL
 273 #define CONFIG_SPL_SERIAL_SUPPORT
 274 #define CONFIG_SPL_NAND_SUPPORT
 275 #define CONFIG_SPL_FLUSH_IMAGE
 276 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 277 #define CONFIG_SPL_TEXT_BASE            0xff800000
 278 #define CONFIG_SPL_MAX_SIZE             4096
 279 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
 280 #define CONFIG_SYS_NAND_U_BOOT_DST      0xf8f80000
 281 #define CONFIG_SYS_NAND_U_BOOT_START    0xf8f80000
 282 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
 283 #endif /* not CONFIG_TPL_BUILD */
 284
 285 #define CONFIG_SPL_PAD_TO               0x20000
 286 #define CONFIG_TPL_PAD_TO               0x20000
 287 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 288 #define CONFIG_SYS_TEXT_BASE            0x11001000
 289 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 290 #endif
 291
 292 #ifndef CONFIG_SYS_TEXT_BASE
 293 #define CONFIG_SYS_TEXT_BASE            0xeff40000
 294 #endif
 295
 296 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 297 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 298 #endif
 299
 300 #ifndef CONFIG_SYS_MONITOR_BASE
 301 #ifdef CONFIG_SPL_BUILD
 302 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 303 #else
 304 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 305 #endif
 306 #endif
 307
 308 /* High Level Configuration Options */
 309 #define CONFIG_BOOKE
 310 #define CONFIG_E500
 311
 312 #define CONFIG_MP
 313
 314 #define CONFIG_FSL_ELBC
 315 #define CONFIG_PCI
 316 #define CONFIG_PCIE1    /* PCIE controler 1 (slot 1) */
 317 #define CONFIG_PCIE2    /* PCIE controler 2 (slot 2) */
 318 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 319 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 320 #define CONFIG_FSL_PCIE_RESET   /* need PCIe reset errata */
 321 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 322
 323 #define CONFIG_FSL_LAW
 324 #define CONFIG_TSEC_ENET        /* tsec ethernet support */
 325 #define CONFIG_ENV_OVERWRITE
 326
 327 #define CONFIG_CMD_SATA
 328 #define CONFIG_SATA_SIL
 329 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 330 #define CONFIG_LIBATA
 331 #define CONFIG_LBA48
 332
 333 #if defined(CONFIG_P2020RDB)
 334 #define CONFIG_SYS_CLK_FREQ     100000000
 335 #else
 336 #define CONFIG_SYS_CLK_FREQ     66666666
 337 #endif
 338 #define CONFIG_DDR_CLK_FREQ     66666666
 339
 340 #define CONFIG_HWCONFIG
 341 /*
 342  * These can be toggled for performance analysis, otherwise use default.
 343  */
 344 #define CONFIG_L2_CACHE
 345 #define CONFIG_BTB
 346
 347 #define CONFIG_BOARD_EARLY_INIT_F       /* Call board_pre_init */
 348
 349 #define CONFIG_ENABLE_36BIT_PHYS
 350
 351 #ifdef CONFIG_PHYS_64BIT
 352 #define CONFIG_ADDR_MAP                 1
 353 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
 354 #endif
 355
 356 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 357 #define CONFIG_SYS_MEMTEST_END          0x1fffffff
 358 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 359
 360 #define CONFIG_SYS_CCSRBAR              0xffe00000
 361 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 362
 363 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
 364        SPL code*/
 365 #ifdef CONFIG_SPL_BUILD
 366 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 367 #endif
 368
 369 /* DDR Setup */
 370 #define CONFIG_SYS_FSL_DDR3
 371 #define CONFIG_SYS_DDR_RAW_TIMING
 372 #define CONFIG_DDR_SPD
 373 #define CONFIG_SYS_SPD_BUS_NUM 1
 374 #define SPD_EEPROM_ADDRESS 0x52
 375 #undef CONFIG_FSL_DDR_INTERACTIVE
 376
 377 #if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD))
 378 #define CONFIG_SYS_SDRAM_SIZE_LAW       LAW_SIZE_2G
 379 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 380 #else
 381 #define CONFIG_SYS_SDRAM_SIZE_LAW       LAW_SIZE_1G
 382 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 383 #endif
 384 #define CONFIG_SYS_SDRAM_SIZE           (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
 385 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 386 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 387
 388 #define CONFIG_NUM_DDR_CONTROLLERS      1
 389 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 390
 391 /* Default settings for DDR3 */
 392 #ifndef CONFIG_P2020RDB
 393 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
 394 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014302
 395 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 396 #define CONFIG_SYS_DDR_CS1_BNDS         0x0040007f
 397 #define CONFIG_SYS_DDR_CS1_CONFIG       0x80014302
 398 #define CONFIG_SYS_DDR_CS1_CONFIG_2     0x00000000
 399
 400 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 401 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 402 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 403 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 404
 405 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 406 #define CONFIG_SYS_DDR_WRLVL_CONTROL    0x8655A608
 407 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 408 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 409 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 410 #define CONFIG_SYS_DDR_CONTROL          0xC70C0000      /* Type = DDR3  */
 411 #define CONFIG_SYS_DDR_CONTROL_2        0x04401050
 412 #define CONFIG_SYS_DDR_TIMING_4         0x00220001
 413 #define CONFIG_SYS_DDR_TIMING_5         0x03402400
 414
 415 #define CONFIG_SYS_DDR_TIMING_3         0x00020000
 416 #define CONFIG_SYS_DDR_TIMING_0         0x00330004
 417 #define CONFIG_SYS_DDR_TIMING_1         0x6f6B4846
 418 #define CONFIG_SYS_DDR_TIMING_2         0x0FA8C8CF
 419 #define CONFIG_SYS_DDR_CLK_CTRL         0x03000000
 420 #define CONFIG_SYS_DDR_MODE_1           0x40461520
 421 #define CONFIG_SYS_DDR_MODE_2           0x8000c000
 422 #define CONFIG_SYS_DDR_INTERVAL         0x0C300000
 423 #endif
 424
 425 #undef CONFIG_CLOCKS_IN_MHZ
 426
 427 /*
 428  * Memory map
 429  *
 430  * 0x0000_0000 0x7fff_ffff      DDR             Up to 2GB cacheable
 431  * 0x8000_0000 0xdfff_ffff      PCI Express Mem 1.5G non-cacheable(PCIe * 3)
 432  * 0xec00_0000 0xefff_ffff      NOR flash       Up to 64M non-cacheable CS0/1
 433  * 0xf8f8_0000 0xf8ff_ffff      L2 SRAM         Up to 512K cacheable
 434  *   (early boot only)
 435  * 0xff80_0000 0xff80_7fff      NAND flash      32K non-cacheable       CS1/0
 436  * 0xff98_0000 0xff98_ffff      PMC             64K non-cacheable       CS2
 437  * 0xffa0_0000 0xffaf_ffff      CPLD            1M non-cacheable        CS3
 438  * 0xffb0_0000 0xffbf_ffff      VSC7385 switch  1M non-cacheable        CS2
 439  * 0xffc0_0000 0xffc3_ffff      PCI IO range    256k non-cacheable
 440  * 0xffd0_0000 0xffd0_3fff      L1 for stack    16K cacheable
 441  * 0xffe0_0000 0xffef_ffff      CCSR            1M non-cacheable
 442  */
 443
 444
 445 /*
 446  * Local Bus Definitions
 447  */
 448 #if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD))
 449 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* 64M */
 450 #define CONFIG_SYS_FLASH_BASE           0xec000000
 451 #elif defined(CONFIG_P1020UTM)
 452 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* 32M */
 453 #define CONFIG_SYS_FLASH_BASE           0xee000000
 454 #else
 455 #define CONFIG_SYS_MAX_FLASH_SECT       128     /* 16M */
 456 #define CONFIG_SYS_FLASH_BASE           0xef000000
 457 #endif
 458
 459
 460 #ifdef CONFIG_PHYS_64BIT
 461 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 462 #else
 463 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 464 #endif
 465
 466 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
 467         | BR_PS_16 | BR_V)
 468
 469 #define CONFIG_FLASH_OR_PRELIM  0xfc000ff7
 470
 471 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 472 #define CONFIG_SYS_FLASH_QUIET_TEST
 473 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 474
 475 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 476
 477 #undef CONFIG_SYS_FLASH_CHECKSUM
 478 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 479 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 480
 481 #define CONFIG_FLASH_CFI_DRIVER
 482 #define CONFIG_SYS_FLASH_CFI
 483 #define CONFIG_SYS_FLASH_EMPTY_INFO
 484 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 485
 486 /* Nand Flash */
 487 #ifdef CONFIG_NAND_FSL_ELBC
 488 #define CONFIG_SYS_NAND_BASE            0xff800000
 489 #ifdef CONFIG_PHYS_64BIT
 490 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 491 #else
 492 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 493 #endif
 494
 495 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 496 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 497 #define CONFIG_MTD_NAND_VERIFY_WRITE
 498 #define CONFIG_CMD_NAND
 499 #if defined(CONFIG_P1020RDB_PD)
 500 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 501 #else
 502 #define CONFIG_SYS_NAND_BLOCK_SIZE      (16 * 1024)
 503 #endif
 504
 505 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 506         | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 507         | BR_PS_8       /* Port Size = 8 bit */ \
 508         | BR_MS_FCM     /* MSEL = FCM */ \
 509         | BR_V) /* valid */
 510 #if defined(CONFIG_P1020RDB_PD)
 511 #define CONFIG_SYS_NAND_OR_PRELIM       (OR_AM_32KB \
 512         | OR_FCM_PGS    /* Large Page*/ \
 513         | OR_FCM_CSCT \
 514         | OR_FCM_CST \
 515         | OR_FCM_CHT \
 516         | OR_FCM_SCY_1 \
 517         | OR_FCM_TRLX \
 518         | OR_FCM_EHTR)
 519 #else
 520 #define CONFIG_SYS_NAND_OR_PRELIM       (OR_AM_32KB     /* small page */ \
 521         | OR_FCM_CSCT \
 522         | OR_FCM_CST \
 523         | OR_FCM_CHT \
 524         | OR_FCM_SCY_1 \
 525         | OR_FCM_TRLX \
 526         | OR_FCM_EHTR)
 527 #endif
 528 #endif /* CONFIG_NAND_FSL_ELBC */
 529
 530 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 531
 532 #define CONFIG_SYS_INIT_RAM_LOCK
 533 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* stack in RAM */
 534 #ifdef CONFIG_PHYS_64BIT
 535 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 536 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 537 /* The assembler doesn't like typecast */
 538 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 539         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 540           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 541 #else
 542 /* Initial L1 address */
 543 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
 544 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 545 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 546 #endif
 547 /* Size of used area in RAM */
 548 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 549
 550 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 551                                         GENERATED_GBL_DATA_SIZE)
 552 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 553
 554 #define CONFIG_SYS_MONITOR_LEN  (768 * 1024)
 555 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024)/* Reserved for malloc */
 556
 557 #define CONFIG_SYS_CPLD_BASE    0xffa00000
 558 #ifdef CONFIG_PHYS_64BIT
 559 #define CONFIG_SYS_CPLD_BASE_PHYS       0xfffa00000ull
 560 #else
 561 #define CONFIG_SYS_CPLD_BASE_PHYS       CONFIG_SYS_CPLD_BASE
 562 #endif
 563 /* CPLD config size: 1Mb */
 564 #define CONFIG_CPLD_BR_PRELIM   (BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \
 565                                         BR_PS_8 | BR_V)
 566 #define CONFIG_CPLD_OR_PRELIM   (0xfff009f7)
 567
 568 #define CONFIG_SYS_PMC_BASE     0xff980000
 569 #define CONFIG_SYS_PMC_BASE_PHYS        CONFIG_SYS_PMC_BASE
 570 #define CONFIG_PMC_BR_PRELIM    (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
 571                                         BR_PS_8 | BR_V)
 572 #define CONFIG_PMC_OR_PRELIM    (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
 573                                  OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
 574                                  OR_GPCM_EAD)
 575
 576 #ifdef CONFIG_NAND
 577 #define CONFIG_SYS_BR0_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
 578 #define CONFIG_SYS_OR0_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 579 #define CONFIG_SYS_BR1_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 580 #define CONFIG_SYS_OR1_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 581 #else
 582 #define CONFIG_SYS_BR0_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 583 #define CONFIG_SYS_OR0_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 584 #ifdef CONFIG_NAND_FSL_ELBC
 585 #define CONFIG_SYS_BR1_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
 586 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 587 #endif
 588 #endif
 589 #define CONFIG_SYS_BR3_PRELIM   CONFIG_CPLD_BR_PRELIM   /* CPLD Base Address */
 590 #define CONFIG_SYS_OR3_PRELIM   CONFIG_CPLD_OR_PRELIM   /* CPLD Options */
 591
 592
 593 /* Vsc7385 switch */
 594 #ifdef CONFIG_VSC7385_ENET
 595 #define CONFIG_SYS_VSC7385_BASE         0xffb00000
 596
 597 #ifdef CONFIG_PHYS_64BIT
 598 #define CONFIG_SYS_VSC7385_BASE_PHYS    0xfffb00000ull
 599 #else
 600 #define CONFIG_SYS_VSC7385_BASE_PHYS    CONFIG_SYS_VSC7385_BASE
 601 #endif
 602
 603 #define CONFIG_SYS_VSC7385_BR_PRELIM    \
 604         (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V)
 605 #define CONFIG_SYS_VSC7385_OR_PRELIM    (OR_AM_128KB | OR_GPCM_CSNT | \
 606                         OR_GPCM_XACS |  OR_GPCM_SCY_15 | OR_GPCM_SETA | \
 607                         OR_GPCM_TRLX |  OR_GPCM_EHTR | OR_GPCM_EAD)
 608
 609 #define CONFIG_SYS_BR2_PRELIM   CONFIG_SYS_VSC7385_BR_PRELIM
 610 #define CONFIG_SYS_OR2_PRELIM   CONFIG_SYS_VSC7385_OR_PRELIM
 611
 612 /* The size of the VSC7385 firmware image */
 613 #define CONFIG_VSC7385_IMAGE_SIZE       8192
 614 #endif
 615
 616 /*
 617  * Config the L2 Cache as L2 SRAM
 618 */
 619 #if defined(CONFIG_SPL_BUILD)
 620 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 621 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 622 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 623 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 624 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 625 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 626 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024)
 627 #define CONFIG_SPL_RELOC_STACK_SIZE     (32 << 10)
 628 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024)
 629 #if defined(CONFIG_P2020RDB)
 630 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (364 << 10)
 631 #else
 632 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (108 << 10)
 633 #endif
 634 #elif defined(CONFIG_NAND)
 635 #ifdef CONFIG_TPL_BUILD
 636 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 637 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 638 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 639 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 640 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
 641 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
 642 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
 643 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
 644 #else
 645 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 646 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 647 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 648 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x2000)
 649 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 650 #endif /* CONFIG_TPL_BUILD */
 651 #endif
 652 #endif
 653
 654 /* Serial Port - controlled on board with jumper J8
 655  * open - index 2
 656  * shorted - index 1
 657  */
 658 #define CONFIG_CONS_INDEX               1
 659 #undef CONFIG_SERIAL_SOFTWARE_FIFO
 660 #define CONFIG_SYS_NS16550
 661 #define CONFIG_SYS_NS16550_SERIAL
 662 #define CONFIG_SYS_NS16550_REG_SIZE     1
 663 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 664 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 665 #define CONFIG_NS16550_MIN_FUNCTIONS
 666 #endif
 667
 668 #define CONFIG_SYS_BAUDRATE_TABLE       \
 669         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 670
 671 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 672 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 673
 674 /* Use the HUSH parser */
 675 #define CONFIG_SYS_HUSH_PARSER
 676
 677 /*
 678  * Pass open firmware flat tree
 679  */
 680 #define CONFIG_OF_LIBFDT
 681 #define CONFIG_OF_BOARD_SETUP
 682 #define CONFIG_OF_STDOUT_VIA_ALIAS
 683
 684 /* new uImage format support */
 685 #define CONFIG_FIT
 686 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 687
 688 /* I2C */
 689 #define CONFIG_SYS_I2C
 690 #define CONFIG_SYS_I2C_FSL
 691 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 692 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 693 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 694 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 695 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 696 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 697 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x29} }
 698 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x52
 699 #define CONFIG_SYS_SPD_BUS_NUM          1 /* For rom_loc and flash bank */
 700
 701 /*
 702  * I2C2 EEPROM
 703  */
 704 #undef CONFIG_ID_EEPROM
 705
 706 #define CONFIG_RTC_PT7C4338
 707 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 708 #define CONFIG_SYS_I2C_PCA9557_ADDR     0x18
 709
 710 /* enable read and write access to EEPROM */
 711 #define CONFIG_CMD_EEPROM
 712 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 713 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 714 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 715 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 716
 717 /*
 718  * eSPI - Enhanced SPI
 719  */
 720 #define CONFIG_HARD_SPI
 721 #define CONFIG_FSL_ESPI
 722
 723 #if defined(CONFIG_SPI_FLASH)
 724 #define CONFIG_SPI_FLASH_SPANSION
 725 #define CONFIG_CMD_SF
 726 #define CONFIG_SF_DEFAULT_SPEED 10000000
 727 #define CONFIG_SF_DEFAULT_MODE  0
 728 #endif
 729
 730 #if defined(CONFIG_PCI)
 731 /*
 732  * General PCI
 733  * Memory space is mapped 1-1, but I/O space must start from 0.
 734  */
 735
 736 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
 737 #define CONFIG_SYS_PCIE2_NAME           "PCIe SLOT"
 738 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 739 #ifdef CONFIG_PHYS_64BIT
 740 #define CONFIG_SYS_PCIE2_MEM_BUS        0xc0000000
 741 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 742 #else
 743 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 744 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 745 #endif
 746 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 747 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 748 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 749 #ifdef CONFIG_PHYS_64BIT
 750 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 751 #else
 752 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 753 #endif
 754 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 755
 756 /* controller 1, Slot 2, tgtid 1, Base address a000 */
 757 #define CONFIG_SYS_PCIE1_NAME           "mini PCIe SLOT"
 758 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 759 #ifdef CONFIG_PHYS_64BIT
 760 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 761 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 762 #else
 763 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 764 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 765 #endif
 766 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 767 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
 768 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 769 #ifdef CONFIG_PHYS_64BIT
 770 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc00000ull
 771 #else
 772 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc00000
 773 #endif
 774 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 775
 776 #define CONFIG_PCI_PNP  /* do pci plug-and-play */
 777 #define CONFIG_E1000    /* Defind e1000 pci Ethernet card*/
 778 #define CONFIG_CMD_PCI
 779 #define CONFIG_CMD_NET
 780
 781 #define CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 782 #define CONFIG_DOS_PARTITION
 783 #endif /* CONFIG_PCI */
 784
 785 #if defined(CONFIG_TSEC_ENET)
 786 #define CONFIG_MII              /* MII PHY management */
 787 #define CONFIG_TSEC1
 788 #define CONFIG_TSEC1_NAME       "eTSEC1"
 789 #define CONFIG_TSEC2
 790 #define CONFIG_TSEC2_NAME       "eTSEC2"
 791 #define CONFIG_TSEC3
 792 #define CONFIG_TSEC3_NAME       "eTSEC3"
 793
 794 #define TSEC1_PHY_ADDR  2
 795 #define TSEC2_PHY_ADDR  0
 796 #define TSEC3_PHY_ADDR  1
 797
 798 #define TSEC1_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 799 #define TSEC2_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 800 #define TSEC3_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 801
 802 #define TSEC1_PHYIDX    0
 803 #define TSEC2_PHYIDX    0
 804 #define TSEC3_PHYIDX    0
 805
 806 #define CONFIG_ETHPRIME "eTSEC1"
 807
 808 #define CONFIG_PHY_GIGE 1       /* Include GbE speed/duplex detection */
 809
 810 #define CONFIG_HAS_ETH0
 811 #define CONFIG_HAS_ETH1
 812 #define CONFIG_HAS_ETH2
 813 #endif /* CONFIG_TSEC_ENET */
 814
 815 #ifdef CONFIG_QE
 816 /* QE microcode/firmware address */
 817 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 818 #define CONFIG_SYS_QE_FW_ADDR   0xefec0000
 819 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 820 #endif /* CONFIG_QE */
 821
 822 #ifdef CONFIG_P1025RDB
 823 /*
 824  * QE UEC ethernet configuration
 825  */
 826 #define CONFIG_MIIM_ADDRESS     (CONFIG_SYS_CCSRBAR + 0x82120)
 827
 828 #undef CONFIG_UEC_ETH
 829 #define CONFIG_PHY_MODE_NEED_CHANGE
 830
 831 #define CONFIG_UEC_ETH1 /* ETH1 */
 832 #define CONFIG_HAS_ETH0
 833
 834 #ifdef CONFIG_UEC_ETH1
 835 #define CONFIG_SYS_UEC1_UCC_NUM 0       /* UCC1 */
 836 #define CONFIG_SYS_UEC1_RX_CLK  QE_CLK12 /* CLK12 for MII */
 837 #define CONFIG_SYS_UEC1_TX_CLK  QE_CLK9 /* CLK9 for MII */
 838 #define CONFIG_SYS_UEC1_ETH_TYPE        FAST_ETH
 839 #define CONFIG_SYS_UEC1_PHY_ADDR        0x0     /* 0x0 for MII */
 840 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 841 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
 842 #endif /* CONFIG_UEC_ETH1 */
 843
 844 #define CONFIG_UEC_ETH5 /* ETH5 */
 845 #define CONFIG_HAS_ETH1
 846
 847 #ifdef CONFIG_UEC_ETH5
 848 #define CONFIG_SYS_UEC5_UCC_NUM 4       /* UCC5 */
 849 #define CONFIG_SYS_UEC5_RX_CLK  QE_CLK_NONE
 850 #define CONFIG_SYS_UEC5_TX_CLK  QE_CLK13 /* CLK 13 for RMII */
 851 #define CONFIG_SYS_UEC5_ETH_TYPE        FAST_ETH
 852 #define CONFIG_SYS_UEC5_PHY_ADDR        0x3     /* 0x3 for RMII */
 853 #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 854 #define CONFIG_SYS_UEC5_INTERFACE_SPEED 100
 855 #endif /* CONFIG_UEC_ETH5 */
 856 #endif /* CONFIG_P1025RDB */
 857
 858 /*
 859  * Environment
 860  */
 861 #ifdef CONFIG_SPIFLASH
 862 #define CONFIG_ENV_IS_IN_SPI_FLASH
 863 #define CONFIG_ENV_SPI_BUS      0
 864 #define CONFIG_ENV_SPI_CS       0
 865 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 866 #define CONFIG_ENV_SPI_MODE     0
 867 #define CONFIG_ENV_SIZE         0x2000  /* 8KB */
 868 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 869 #define CONFIG_ENV_SECT_SIZE    0x10000
 870 #elif defined(CONFIG_SDCARD)
 871 #define CONFIG_ENV_IS_IN_MMC
 872 #define CONFIG_FSL_FIXED_MMC_LOCATION
 873 #define CONFIG_ENV_SIZE         0x2000
 874 #define CONFIG_SYS_MMC_ENV_DEV  0
 875 #elif defined(CONFIG_NAND)
 876 #ifdef CONFIG_TPL_BUILD
 877 #define CONFIG_ENV_SIZE         0x2000
 878 #define CONFIG_ENV_ADDR         (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 879 #else
 880 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 881 #endif
 882 #define CONFIG_ENV_IS_IN_NAND
 883 #define CONFIG_ENV_OFFSET       (1024 * 1024)
 884 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE)
 885 #elif defined(CONFIG_SYS_RAMBOOT)
 886 #define CONFIG_ENV_IS_NOWHERE   /* Store ENV in memory only */
 887 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 888 #define CONFIG_ENV_SIZE         0x2000
 889 #else
 890 #define CONFIG_ENV_IS_IN_FLASH
 891 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 892 #define CONFIG_ENV_SIZE         0x2000
 893 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 894 #endif
 895
 896 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 897 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 898
 899 /*
 900  * Command line configuration.
 901  */
 902 #include <config_cmd_default.h>
 903
 904 #define CONFIG_CMD_IRQ
 905 #define CONFIG_CMD_PING
 906 #define CONFIG_CMD_I2C
 907 #define CONFIG_CMD_MII
 908 #define CONFIG_CMD_DATE
 909 #define CONFIG_CMD_ELF
 910 #define CONFIG_CMD_SETEXPR
 911 #define CONFIG_CMD_REGINFO
 912
 913 /*
 914  * USB
 915  */
 916 #define CONFIG_HAS_FSL_DR_USB
 917
 918 #if defined(CONFIG_HAS_FSL_DR_USB)
 919 #define CONFIG_USB_EHCI
 920
 921 #ifdef CONFIG_USB_EHCI
 922 #define CONFIG_CMD_USB
 923 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 924 #define CONFIG_USB_EHCI_FSL
 925 #define CONFIG_USB_STORAGE
 926 #endif
 927 #endif
 928
 929 #if defined(CONFIG_P1020RDB_PD)
 930 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
 931 #endif
 932
 933 #define CONFIG_MMC
 934
 935 #ifdef CONFIG_MMC
 936 #define CONFIG_FSL_ESDHC
 937 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 938 #define CONFIG_CMD_MMC
 939 #define CONFIG_GENERIC_MMC
 940 #endif
 941
 942 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \
 943                  || defined(CONFIG_FSL_SATA)
 944 #define CONFIG_CMD_EXT2
 945 #define CONFIG_CMD_FAT
 946 #define CONFIG_DOS_PARTITION
 947 #endif
 948
 949 #undef CONFIG_WATCHDOG  /* watchdog disabled */
 950
 951 /*
 952  * Miscellaneous configurable options
 953  */
 954 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 955 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 956 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 957 #if defined(CONFIG_CMD_KGDB)
 958 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 959 #else
 960 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 961 #endif
 962 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 963         /* Print Buffer Size */
 964 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 965 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 966
 967 /*
 968  * For booting Linux, the board info and command line data
 969  * have to be in the first 64 MB of memory, since this is
 970  * the maximum mapped by the Linux kernel during initialization.
 971  */
 972 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory for Linux*/
 973 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 974
 975 #if defined(CONFIG_CMD_KGDB)
 976 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 977 #endif
 978
 979 /*
 980  * Environment Configuration
 981  */
 982 #define CONFIG_HOSTNAME         unknown
 983 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 984 #define CONFIG_BOOTFILE         "uImage"
 985 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 986
 987 /* default location for tftp and bootm */
 988 #define CONFIG_LOADADDR 1000000
 989
 990 #define CONFIG_BOOTDELAY 10     /* -1 disables auto-boot */
 991 #define CONFIG_BOOTARGS /* the boot command will set bootargs */
 992
 993 #define CONFIG_BAUDRATE 115200
 994
 995 #ifdef __SW_BOOT_NOR
 996 #define __NOR_RST_CMD   \
 997 norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \
 998 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 999 #endif
1000 #ifdef __SW_BOOT_SPI
1001 #define __SPI_RST_CMD   \
1002 spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \
1003 i2c mw 18 3 __SW_BOOT_MASK 1; reset
1004 #endif
1005 #ifdef __SW_BOOT_SD
1006 #define __SD_RST_CMD    \
1007 sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \
1008 i2c mw 18 3 __SW_BOOT_MASK 1; reset
1009 #endif
1010 #ifdef __SW_BOOT_NAND
1011 #define __NAND_RST_CMD  \
1012 nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \
1013 i2c mw 18 3 __SW_BOOT_MASK 1; reset
1014 #endif
1015 #ifdef __SW_BOOT_PCIE
1016 #define __PCIE_RST_CMD  \
1017 pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \
1018 i2c mw 18 3 __SW_BOOT_MASK 1; reset
1019 #endif
1020
1021 #define CONFIG_EXTRA_ENV_SETTINGS       \
1022 "netdev=eth0\0" \
1023 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"     \
1024 "loadaddr=1000000\0"    \
1025 "bootfile=uImage\0"     \
1026 "tftpflash=tftpboot $loadaddr $uboot; " \
1027         "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
1028         "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; "      \
1029         "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \
1030         "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
1031         "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
1032 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"    \
1033 "consoledev=ttyS0\0"    \
1034 "ramdiskaddr=2000000\0" \
1035 "ramdiskfile=rootfs.ext2.gz.uboot\0"    \
1036 "fdtaddr=c00000\0"      \
1037 "bdev=sda1\0" \
1038 "jffs2nor=mtdblock3\0"  \
1039 "norbootaddr=ef080000\0"        \
1040 "norfdtaddr=ef040000\0" \
1041 "jffs2nand=mtdblock9\0" \
1042 "nandbootaddr=100000\0" \
1043 "nandfdtaddr=80000\0"           \
1044 "ramdisk_size=120000\0" \
1045 "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \
1046 "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \
1047 __stringify(__NOR_RST_CMD)"\0" \
1048 __stringify(__SPI_RST_CMD)"\0" \
1049 __stringify(__SD_RST_CMD)"\0" \
1050 __stringify(__NAND_RST_CMD)"\0" \
1051 __stringify(__PCIE_RST_CMD)"\0"
1052
1053 #define CONFIG_NFSBOOTCOMMAND   \
1054 "setenv bootargs root=/dev/nfs rw "     \
1055 "nfsroot=$serverip:$rootpath "  \
1056 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
1057 "console=$consoledev,$baudrate $othbootargs;" \
1058 "tftp $loadaddr $bootfile;"     \
1059 "tftp $fdtaddr $fdtfile;"       \
1060 "bootm $loadaddr - $fdtaddr"
1061
1062 #define CONFIG_HDBOOT   \
1063 "setenv bootargs root=/dev/$bdev rw rootdelay=30 "      \
1064 "console=$consoledev,$baudrate $othbootargs;" \
1065 "usb start;"    \
1066 "ext2load usb 0:1 $loadaddr /boot/$bootfile;"   \
1067 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"     \
1068 "bootm $loadaddr - $fdtaddr"
1069
1070 #define CONFIG_USB_FAT_BOOT     \
1071 "setenv bootargs root=/dev/ram rw "     \
1072 "console=$consoledev,$baudrate $othbootargs " \
1073 "ramdisk_size=$ramdisk_size;"   \
1074 "usb start;"    \
1075 "fatload usb 0:2 $loadaddr $bootfile;"  \
1076 "fatload usb 0:2 $fdtaddr $fdtfile;"    \
1077 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"    \
1078 "bootm $loadaddr $ramdiskaddr $fdtaddr"
1079
1080 #define CONFIG_USB_EXT2_BOOT    \
1081 "setenv bootargs root=/dev/ram rw "     \
1082 "console=$consoledev,$baudrate $othbootargs " \
1083 "ramdisk_size=$ramdisk_size;"   \
1084 "usb start;"    \
1085 "ext2load usb 0:4 $loadaddr $bootfile;" \
1086 "ext2load usb 0:4 $fdtaddr $fdtfile;" \
1087 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
1088 "bootm $loadaddr $ramdiskaddr $fdtaddr"
1089
1090 #define CONFIG_NORBOOT  \
1091 "setenv bootargs root=/dev/$jffs2nor rw "       \
1092 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;"  \
1093 "bootm $norbootaddr - $norfdtaddr"
1094
1095 #define CONFIG_RAMBOOTCOMMAND   \
1096 "setenv bootargs root=/dev/ram rw "     \
1097 "console=$consoledev,$baudrate $othbootargs " \
1098 "ramdisk_size=$ramdisk_size;"   \
1099 "tftp $ramdiskaddr $ramdiskfile;"       \
1100 "tftp $loadaddr $bootfile;"     \
1101 "tftp $fdtaddr $fdtfile;"       \
1102 "bootm $loadaddr $ramdiskaddr $fdtaddr"
1103
1104 #define CONFIG_BOOTCOMMAND      CONFIG_HDBOOT
1105
1106 #endif /* __CONFIG_H */