include/configs/p1_p2_rdb_pc.h

   1 /*
   2  * Copyright 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * QorIQ RDB boards configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #ifdef CONFIG_36BIT
  14 #define CONFIG_PHYS_64BIT
  15 #endif
  16
  17 #if defined(CONFIG_P1020MBG)
  18 #define CONFIG_BOARDNAME "P1020MBG-PC"
  19 #define CONFIG_P1020
  20 #define CONFIG_VSC7385_ENET
  21 #define CONFIG_SLIC
  22 #define __SW_BOOT_MASK          0x03
  23 #define __SW_BOOT_NOR           0xe4
  24 #define __SW_BOOT_SD            0x54
  25 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  26 #endif
  27
  28 #if defined(CONFIG_P1020UTM)
  29 #define CONFIG_BOARDNAME "P1020UTM-PC"
  30 #define CONFIG_P1020
  31 #define __SW_BOOT_MASK          0x03
  32 #define __SW_BOOT_NOR           0xe0
  33 #define __SW_BOOT_SD            0x50
  34 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  35 #endif
  36
  37 #if defined(CONFIG_P1020RDB_PC)
  38 #define CONFIG_BOARDNAME "P1020RDB-PC"
  39 #define CONFIG_NAND_FSL_ELBC
  40 #define CONFIG_P1020
  41 #define CONFIG_SPI_FLASH
  42 #define CONFIG_VSC7385_ENET
  43 #define CONFIG_SLIC
  44 #define __SW_BOOT_MASK          0x03
  45 #define __SW_BOOT_NOR           0x5c
  46 #define __SW_BOOT_SPI           0x1c
  47 #define __SW_BOOT_SD            0x9c
  48 #define __SW_BOOT_NAND          0xec
  49 #define __SW_BOOT_PCIE          0x6c
  50 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  51 #endif
  52
  53 /*
  54  * P1020RDB-PD board has user selectable switches for evaluating different
  55  * frequency and boot options for the P1020 device. The table that
  56  * follow describe the available options. The front six binary number was in
  57  * accordance with SW3[1:6].
  58  * 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off
  59  * 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off
  60  * 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off
  61  * 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off
  62  * 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off
  63  * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off
  64  * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off
  65  */
  66 #if defined(CONFIG_P1020RDB_PD)
  67 #define CONFIG_BOARDNAME "P1020RDB-PD"
  68 #define CONFIG_NAND_FSL_ELBC
  69 #define CONFIG_P1020
  70 #define CONFIG_SPI_FLASH
  71 #define CONFIG_VSC7385_ENET
  72 #define CONFIG_SLIC
  73 #define __SW_BOOT_MASK          0x03
  74 #define __SW_BOOT_NOR           0x64
  75 #define __SW_BOOT_SPI           0x34
  76 #define __SW_BOOT_SD            0x24
  77 #define __SW_BOOT_NAND          0x44
  78 #define __SW_BOOT_PCIE          0x74
  79 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  80 #endif
  81
  82 #if defined(CONFIG_P1021RDB)
  83 #define CONFIG_BOARDNAME "P1021RDB-PC"
  84 #define CONFIG_NAND_FSL_ELBC
  85 #define CONFIG_P1021
  86 #define CONFIG_QE
  87 #define CONFIG_SPI_FLASH
  88 #define CONFIG_VSC7385_ENET
  89 #define CONFIG_SYS_LBC_LBCR     0x00080000      /* Implement conversion of
  90                                                 addresses in the LBC */
  91 #define __SW_BOOT_MASK          0x03
  92 #define __SW_BOOT_NOR           0x5c
  93 #define __SW_BOOT_SPI           0x1c
  94 #define __SW_BOOT_SD            0x9c
  95 #define __SW_BOOT_NAND          0xec
  96 #define __SW_BOOT_PCIE          0x6c
  97 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  98 #endif
  99
 100 #if defined(CONFIG_P1024RDB)
 101 #define CONFIG_BOARDNAME "P1024RDB"
 102 #define CONFIG_NAND_FSL_ELBC
 103 #define CONFIG_P1024
 104 #define CONFIG_SLIC
 105 #define CONFIG_SPI_FLASH
 106 #define __SW_BOOT_MASK          0xf3
 107 #define __SW_BOOT_NOR           0x00
 108 #define __SW_BOOT_SPI           0x08
 109 #define __SW_BOOT_SD            0x04
 110 #define __SW_BOOT_NAND          0x0c
 111 #define CONFIG_SYS_L2_SIZE      (256 << 10)
 112 #endif
 113
 114 #if defined(CONFIG_P1025RDB)
 115 #define CONFIG_BOARDNAME "P1025RDB"
 116 #define CONFIG_NAND_FSL_ELBC
 117 #define CONFIG_P1025
 118 #define CONFIG_QE
 119 #define CONFIG_SLIC
 120 #define CONFIG_SPI_FLASH
 121
 122 #define CONFIG_SYS_LBC_LBCR     0x00080000      /* Implement conversion of
 123                                                 addresses in the LBC */
 124 #define __SW_BOOT_MASK          0xf3
 125 #define __SW_BOOT_NOR           0x00
 126 #define __SW_BOOT_SPI           0x08
 127 #define __SW_BOOT_SD            0x04
 128 #define __SW_BOOT_NAND          0x0c
 129 #define CONFIG_SYS_L2_SIZE      (256 << 10)
 130 #endif
 131
 132 #if defined(CONFIG_P2020RDB)
 133 #define CONFIG_BOARDNAME "P2020RDB-PCA"
 134 #define CONFIG_NAND_FSL_ELBC
 135 #define CONFIG_P2020
 136 #define CONFIG_SPI_FLASH
 137 #define CONFIG_VSC7385_ENET
 138 #define __SW_BOOT_MASK          0x03
 139 #define __SW_BOOT_NOR           0xc8
 140 #define __SW_BOOT_SPI           0x28
 141 #define __SW_BOOT_SD            0x68 /* or 0x18 */
 142 #define __SW_BOOT_NAND          0xe8
 143 #define __SW_BOOT_PCIE          0xa8
 144 #define CONFIG_SYS_L2_SIZE      (512 << 10)
 145 #endif
 146
 147 #ifdef CONFIG_SDCARD
 148 #define CONFIG_SPL
 149 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 150 #define CONFIG_SPL_ENV_SUPPORT
 151 #define CONFIG_SPL_SERIAL_SUPPORT
 152 #define CONFIG_SPL_MMC_SUPPORT
 153 #define CONFIG_SPL_MMC_MINIMAL
 154 #define CONFIG_SPL_FLUSH_IMAGE
 155 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 156 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 157 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 158 #define CONFIG_SPL_I2C_SUPPORT
 159 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
 160 #define CONFIG_SYS_TEXT_BASE            0x11001000
 161 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
 162 #define CONFIG_SPL_PAD_TO               0x20000
 163 #define CONFIG_SPL_MAX_SIZE             (128 * 1024)
 164 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 165 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x11000000)
 166 #define CONFIG_SYS_MMC_U_BOOT_START     (0x11000000)
 167 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (128 << 10)
 168 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 169 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 170 #define CONFIG_SPL_MMC_BOOT
 171 #ifdef CONFIG_SPL_BUILD
 172 #define CONFIG_SPL_COMMON_INIT_DDR
 173 #endif
 174 #endif
 175
 176 #ifdef CONFIG_SPIFLASH
 177 #define CONFIG_SPL
 178 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 179 #define CONFIG_SPL_ENV_SUPPORT
 180 #define CONFIG_SPL_SERIAL_SUPPORT
 181 #define CONFIG_SPL_SPI_SUPPORT
 182 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 183 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 184 #define CONFIG_SPL_FLUSH_IMAGE
 185 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 186 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 187 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 188 #define CONFIG_SPL_I2C_SUPPORT
 189 #define CONFIG_FSL_LAW         /* Use common FSL init code */
 190 #define CONFIG_SYS_TEXT_BASE            0x11001000
 191 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
 192 #define CONFIG_SPL_PAD_TO               0x20000
 193 #define CONFIG_SPL_MAX_SIZE             (128 * 1024)
 194 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
 195 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x11000000)
 196 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x11000000)
 197 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (128 << 10)
 198 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 199 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 200 #define CONFIG_SPL_SPI_BOOT
 201 #ifdef CONFIG_SPL_BUILD
 202 #define CONFIG_SPL_COMMON_INIT_DDR
 203 #endif
 204 #endif
 205
 206 #ifdef CONFIG_NAND
 207 #define CONFIG_SPL
 208 #define CONFIG_TPL
 209 #ifdef CONFIG_TPL_BUILD
 210 #define CONFIG_SPL_NAND_BOOT
 211 #define CONFIG_SPL_FLUSH_IMAGE
 212 #define CONFIG_SPL_ENV_SUPPORT
 213 #define CONFIG_SPL_NAND_INIT
 214 #define CONFIG_SPL_SERIAL_SUPPORT
 215 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 216 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 217 #define CONFIG_SPL_I2C_SUPPORT
 218 #define CONFIG_SPL_NAND_SUPPORT
 219 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 220 #define CONFIG_SPL_COMMON_INIT_DDR
 221 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
 222 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
 223 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 224 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (832 << 10)
 225 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
 226 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
 227 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
 228 #elif defined(CONFIG_SPL_BUILD)
 229 #define CONFIG_SPL_INIT_MINIMAL
 230 #define CONFIG_SPL_SERIAL_SUPPORT
 231 #define CONFIG_SPL_NAND_SUPPORT
 232 #define CONFIG_SPL_FLUSH_IMAGE
 233 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 234 #define CONFIG_SPL_TEXT_BASE            0xff800000
 235 #define CONFIG_SPL_MAX_SIZE             4096
 236 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
 237 #define CONFIG_SYS_NAND_U_BOOT_DST      0xf8f80000
 238 #define CONFIG_SYS_NAND_U_BOOT_START    0xf8f80000
 239 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
 240 #endif /* not CONFIG_TPL_BUILD */
 241
 242 #define CONFIG_SPL_PAD_TO               0x20000
 243 #define CONFIG_TPL_PAD_TO               0x20000
 244 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 245 #define CONFIG_SYS_TEXT_BASE            0x11001000
 246 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 247 #endif
 248
 249 #ifndef CONFIG_SYS_TEXT_BASE
 250 #define CONFIG_SYS_TEXT_BASE            0xeff40000
 251 #endif
 252
 253 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 254 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 255 #endif
 256
 257 #ifndef CONFIG_SYS_MONITOR_BASE
 258 #ifdef CONFIG_SPL_BUILD
 259 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 260 #else
 261 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 262 #endif
 263 #endif
 264
 265 /* High Level Configuration Options */
 266 #define CONFIG_BOOKE
 267 #define CONFIG_E500
 268
 269 #define CONFIG_MP
 270
 271 #define CONFIG_FSL_ELBC
 272 #define CONFIG_PCI
 273 #define CONFIG_PCIE1    /* PCIE controler 1 (slot 1) */
 274 #define CONFIG_PCIE2    /* PCIE controler 2 (slot 2) */
 275 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 276 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 277 #define CONFIG_FSL_PCIE_RESET   /* need PCIe reset errata */
 278 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 279
 280 #define CONFIG_FSL_LAW
 281 #define CONFIG_TSEC_ENET        /* tsec ethernet support */
 282 #define CONFIG_ENV_OVERWRITE
 283
 284 #define CONFIG_CMD_SATA
 285 #define CONFIG_SATA_SIL
 286 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 287 #define CONFIG_LIBATA
 288 #define CONFIG_LBA48
 289
 290 #if defined(CONFIG_P2020RDB)
 291 #define CONFIG_SYS_CLK_FREQ     100000000
 292 #else
 293 #define CONFIG_SYS_CLK_FREQ     66666666
 294 #endif
 295 #define CONFIG_DDR_CLK_FREQ     66666666
 296
 297 #define CONFIG_HWCONFIG
 298 /*
 299  * These can be toggled for performance analysis, otherwise use default.
 300  */
 301 #define CONFIG_L2_CACHE
 302 #define CONFIG_BTB
 303
 304 #define CONFIG_BOARD_EARLY_INIT_F       /* Call board_pre_init */
 305
 306 #define CONFIG_ENABLE_36BIT_PHYS
 307
 308 #ifdef CONFIG_PHYS_64BIT
 309 #define CONFIG_ADDR_MAP                 1
 310 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
 311 #endif
 312
 313 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 314 #define CONFIG_SYS_MEMTEST_END          0x1fffffff
 315 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 316
 317 #define CONFIG_SYS_CCSRBAR              0xffe00000
 318 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 319
 320 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
 321        SPL code*/
 322 #ifdef CONFIG_SPL_BUILD
 323 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 324 #endif
 325
 326 /* DDR Setup */
 327 #define CONFIG_SYS_FSL_DDR3
 328 #define CONFIG_SYS_DDR_RAW_TIMING
 329 #define CONFIG_DDR_SPD
 330 #define CONFIG_SYS_SPD_BUS_NUM 1
 331 #define SPD_EEPROM_ADDRESS 0x52
 332 #undef CONFIG_FSL_DDR_INTERACTIVE
 333
 334 #if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD))
 335 #define CONFIG_SYS_SDRAM_SIZE_LAW       LAW_SIZE_2G
 336 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 337 #else
 338 #define CONFIG_SYS_SDRAM_SIZE_LAW       LAW_SIZE_1G
 339 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 340 #endif
 341 #define CONFIG_SYS_SDRAM_SIZE           (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
 342 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 343 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 344
 345 #define CONFIG_NUM_DDR_CONTROLLERS      1
 346 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 347
 348 /* Default settings for DDR3 */
 349 #ifndef CONFIG_P2020RDB
 350 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
 351 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014302
 352 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 353 #define CONFIG_SYS_DDR_CS1_BNDS         0x0040007f
 354 #define CONFIG_SYS_DDR_CS1_CONFIG       0x80014302
 355 #define CONFIG_SYS_DDR_CS1_CONFIG_2     0x00000000
 356
 357 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 358 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 359 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 360 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 361
 362 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 363 #define CONFIG_SYS_DDR_WRLVL_CONTROL    0x8655A608
 364 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 365 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 366 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 367 #define CONFIG_SYS_DDR_CONTROL          0xC70C0000      /* Type = DDR3  */
 368 #define CONFIG_SYS_DDR_CONTROL_2        0x04401050
 369 #define CONFIG_SYS_DDR_TIMING_4         0x00220001
 370 #define CONFIG_SYS_DDR_TIMING_5         0x03402400
 371
 372 #define CONFIG_SYS_DDR_TIMING_3         0x00020000
 373 #define CONFIG_SYS_DDR_TIMING_0         0x00330004
 374 #define CONFIG_SYS_DDR_TIMING_1         0x6f6B4846
 375 #define CONFIG_SYS_DDR_TIMING_2         0x0FA8C8CF
 376 #define CONFIG_SYS_DDR_CLK_CTRL         0x03000000
 377 #define CONFIG_SYS_DDR_MODE_1           0x40461520
 378 #define CONFIG_SYS_DDR_MODE_2           0x8000c000
 379 #define CONFIG_SYS_DDR_INTERVAL         0x0C300000
 380 #endif
 381
 382 #undef CONFIG_CLOCKS_IN_MHZ
 383
 384 /*
 385  * Memory map
 386  *
 387  * 0x0000_0000 0x7fff_ffff      DDR             Up to 2GB cacheable
 388  * 0x8000_0000 0xdfff_ffff      PCI Express Mem 1.5G non-cacheable(PCIe * 3)
 389  * 0xec00_0000 0xefff_ffff      NOR flash       Up to 64M non-cacheable CS0/1
 390  * 0xf8f8_0000 0xf8ff_ffff      L2 SRAM         Up to 512K cacheable
 391  *   (early boot only)
 392  * 0xff80_0000 0xff80_7fff      NAND flash      32K non-cacheable       CS1/0
 393  * 0xff98_0000 0xff98_ffff      PMC             64K non-cacheable       CS2
 394  * 0xffa0_0000 0xffaf_ffff      CPLD            1M non-cacheable        CS3
 395  * 0xffb0_0000 0xffbf_ffff      VSC7385 switch  1M non-cacheable        CS2
 396  * 0xffc0_0000 0xffc3_ffff      PCI IO range    256k non-cacheable
 397  * 0xffd0_0000 0xffd0_3fff      L1 for stack    16K cacheable
 398  * 0xffe0_0000 0xffef_ffff      CCSR            1M non-cacheable
 399  */
 400
 401
 402 /*
 403  * Local Bus Definitions
 404  */
 405 #if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD))
 406 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* 64M */
 407 #define CONFIG_SYS_FLASH_BASE           0xec000000
 408 #elif defined(CONFIG_P1020UTM)
 409 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* 32M */
 410 #define CONFIG_SYS_FLASH_BASE           0xee000000
 411 #else
 412 #define CONFIG_SYS_MAX_FLASH_SECT       128     /* 16M */
 413 #define CONFIG_SYS_FLASH_BASE           0xef000000
 414 #endif
 415
 416
 417 #ifdef CONFIG_PHYS_64BIT
 418 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 419 #else
 420 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 421 #endif
 422
 423 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
 424         | BR_PS_16 | BR_V)
 425
 426 #define CONFIG_FLASH_OR_PRELIM  0xfc000ff7
 427
 428 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 429 #define CONFIG_SYS_FLASH_QUIET_TEST
 430 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 431
 432 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 433
 434 #undef CONFIG_SYS_FLASH_CHECKSUM
 435 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 436 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 437
 438 #define CONFIG_FLASH_CFI_DRIVER
 439 #define CONFIG_SYS_FLASH_CFI
 440 #define CONFIG_SYS_FLASH_EMPTY_INFO
 441 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 442
 443 /* Nand Flash */
 444 #ifdef CONFIG_NAND_FSL_ELBC
 445 #define CONFIG_SYS_NAND_BASE            0xff800000
 446 #ifdef CONFIG_PHYS_64BIT
 447 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 448 #else
 449 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 450 #endif
 451
 452 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 453 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 454 #define CONFIG_MTD_NAND_VERIFY_WRITE
 455 #define CONFIG_CMD_NAND
 456 #if defined(CONFIG_P1020RDB_PD)
 457 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 458 #else
 459 #define CONFIG_SYS_NAND_BLOCK_SIZE      (16 * 1024)
 460 #endif
 461
 462 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 463         | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 464         | BR_PS_8       /* Port Size = 8 bit */ \
 465         | BR_MS_FCM     /* MSEL = FCM */ \
 466         | BR_V) /* valid */
 467 #if defined(CONFIG_P1020RDB_PD)
 468 #define CONFIG_SYS_NAND_OR_PRELIM       (OR_AM_32KB \
 469         | OR_FCM_PGS    /* Large Page*/ \
 470         | OR_FCM_CSCT \
 471         | OR_FCM_CST \
 472         | OR_FCM_CHT \
 473         | OR_FCM_SCY_1 \
 474         | OR_FCM_TRLX \
 475         | OR_FCM_EHTR)
 476 #else
 477 #define CONFIG_SYS_NAND_OR_PRELIM       (OR_AM_32KB     /* small page */ \
 478         | OR_FCM_CSCT \
 479         | OR_FCM_CST \
 480         | OR_FCM_CHT \
 481         | OR_FCM_SCY_1 \
 482         | OR_FCM_TRLX \
 483         | OR_FCM_EHTR)
 484 #endif
 485 #endif /* CONFIG_NAND_FSL_ELBC */
 486
 487 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 488
 489 #define CONFIG_SYS_INIT_RAM_LOCK
 490 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* stack in RAM */
 491 #ifdef CONFIG_PHYS_64BIT
 492 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 493 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 494 /* The assembler doesn't like typecast */
 495 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 496         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 497           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 498 #else
 499 /* Initial L1 address */
 500 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
 501 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 502 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 503 #endif
 504 /* Size of used area in RAM */
 505 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 506
 507 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 508                                         GENERATED_GBL_DATA_SIZE)
 509 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 510
 511 #define CONFIG_SYS_MONITOR_LEN  (768 * 1024)
 512 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024)/* Reserved for malloc */
 513
 514 #define CONFIG_SYS_CPLD_BASE    0xffa00000
 515 #ifdef CONFIG_PHYS_64BIT
 516 #define CONFIG_SYS_CPLD_BASE_PHYS       0xfffa00000ull
 517 #else
 518 #define CONFIG_SYS_CPLD_BASE_PHYS       CONFIG_SYS_CPLD_BASE
 519 #endif
 520 /* CPLD config size: 1Mb */
 521 #define CONFIG_CPLD_BR_PRELIM   (BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \
 522                                         BR_PS_8 | BR_V)
 523 #define CONFIG_CPLD_OR_PRELIM   (0xfff009f7)
 524
 525 #define CONFIG_SYS_PMC_BASE     0xff980000
 526 #define CONFIG_SYS_PMC_BASE_PHYS        CONFIG_SYS_PMC_BASE
 527 #define CONFIG_PMC_BR_PRELIM    (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
 528                                         BR_PS_8 | BR_V)
 529 #define CONFIG_PMC_OR_PRELIM    (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
 530                                  OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
 531                                  OR_GPCM_EAD)
 532
 533 #ifdef CONFIG_NAND
 534 #define CONFIG_SYS_BR0_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
 535 #define CONFIG_SYS_OR0_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 536 #define CONFIG_SYS_BR1_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 537 #define CONFIG_SYS_OR1_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 538 #else
 539 #define CONFIG_SYS_BR0_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 540 #define CONFIG_SYS_OR0_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 541 #ifdef CONFIG_NAND_FSL_ELBC
 542 #define CONFIG_SYS_BR1_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
 543 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 544 #endif
 545 #endif
 546 #define CONFIG_SYS_BR3_PRELIM   CONFIG_CPLD_BR_PRELIM   /* CPLD Base Address */
 547 #define CONFIG_SYS_OR3_PRELIM   CONFIG_CPLD_OR_PRELIM   /* CPLD Options */
 548
 549
 550 /* Vsc7385 switch */
 551 #ifdef CONFIG_VSC7385_ENET
 552 #define CONFIG_SYS_VSC7385_BASE         0xffb00000
 553
 554 #ifdef CONFIG_PHYS_64BIT
 555 #define CONFIG_SYS_VSC7385_BASE_PHYS    0xfffb00000ull
 556 #else
 557 #define CONFIG_SYS_VSC7385_BASE_PHYS    CONFIG_SYS_VSC7385_BASE
 558 #endif
 559
 560 #define CONFIG_SYS_VSC7385_BR_PRELIM    \
 561         (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V)
 562 #define CONFIG_SYS_VSC7385_OR_PRELIM    (OR_AM_128KB | OR_GPCM_CSNT | \
 563                         OR_GPCM_XACS |  OR_GPCM_SCY_15 | OR_GPCM_SETA | \
 564                         OR_GPCM_TRLX |  OR_GPCM_EHTR | OR_GPCM_EAD)
 565
 566 #define CONFIG_SYS_BR2_PRELIM   CONFIG_SYS_VSC7385_BR_PRELIM
 567 #define CONFIG_SYS_OR2_PRELIM   CONFIG_SYS_VSC7385_OR_PRELIM
 568
 569 /* The size of the VSC7385 firmware image */
 570 #define CONFIG_VSC7385_IMAGE_SIZE       8192
 571 #endif
 572
 573 /*
 574  * Config the L2 Cache as L2 SRAM
 575 */
 576 #if defined(CONFIG_SPL_BUILD)
 577 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 578 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 579 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 580 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 581 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 582 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 583 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024)
 584 #define CONFIG_SPL_RELOC_STACK_SIZE     (32 << 10)
 585 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024)
 586 #if defined(CONFIG_P2020RDB)
 587 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (364 << 10)
 588 #else
 589 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (108 << 10)
 590 #endif
 591 #elif defined(CONFIG_NAND)
 592 #ifdef CONFIG_TPL_BUILD
 593 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 594 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 595 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 596 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 597 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
 598 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
 599 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
 600 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
 601 #else
 602 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 603 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 604 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 605 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x2000)
 606 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 607 #endif /* CONFIG_TPL_BUILD */
 608 #endif
 609 #endif
 610
 611 /* Serial Port - controlled on board with jumper J8
 612  * open - index 2
 613  * shorted - index 1
 614  */
 615 #define CONFIG_CONS_INDEX               1
 616 #undef CONFIG_SERIAL_SOFTWARE_FIFO
 617 #define CONFIG_SYS_NS16550
 618 #define CONFIG_SYS_NS16550_SERIAL
 619 #define CONFIG_SYS_NS16550_REG_SIZE     1
 620 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 621 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 622 #define CONFIG_NS16550_MIN_FUNCTIONS
 623 #endif
 624
 625 #define CONFIG_SYS_BAUDRATE_TABLE       \
 626         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 627
 628 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 629 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 630
 631 /* Use the HUSH parser */
 632 #define CONFIG_SYS_HUSH_PARSER
 633
 634 /*
 635  * Pass open firmware flat tree
 636  */
 637 #define CONFIG_OF_LIBFDT
 638 #define CONFIG_OF_BOARD_SETUP
 639 #define CONFIG_OF_STDOUT_VIA_ALIAS
 640
 641 /* new uImage format support */
 642 #define CONFIG_FIT
 643 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 644
 645 /* I2C */
 646 #define CONFIG_SYS_I2C
 647 #define CONFIG_SYS_I2C_FSL
 648 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 649 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 650 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 651 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 652 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 653 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 654 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x29} }
 655 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x52
 656 #define CONFIG_SYS_SPD_BUS_NUM          1 /* For rom_loc and flash bank */
 657
 658 /*
 659  * I2C2 EEPROM
 660  */
 661 #undef CONFIG_ID_EEPROM
 662
 663 #define CONFIG_RTC_PT7C4338
 664 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 665 #define CONFIG_SYS_I2C_PCA9557_ADDR     0x18
 666
 667 /* enable read and write access to EEPROM */
 668 #define CONFIG_CMD_EEPROM
 669 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 670 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 671 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 672 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 673
 674 /*
 675  * eSPI - Enhanced SPI
 676  */
 677 #define CONFIG_HARD_SPI
 678 #define CONFIG_FSL_ESPI
 679
 680 #if defined(CONFIG_SPI_FLASH)
 681 #define CONFIG_SPI_FLASH_SPANSION
 682 #define CONFIG_CMD_SF
 683 #define CONFIG_SF_DEFAULT_SPEED 10000000
 684 #define CONFIG_SF_DEFAULT_MODE  0
 685 #endif
 686
 687 #if defined(CONFIG_PCI)
 688 /*
 689  * General PCI
 690  * Memory space is mapped 1-1, but I/O space must start from 0.
 691  */
 692
 693 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
 694 #define CONFIG_SYS_PCIE2_NAME           "PCIe SLOT"
 695 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 696 #ifdef CONFIG_PHYS_64BIT
 697 #define CONFIG_SYS_PCIE2_MEM_BUS        0xc0000000
 698 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 699 #else
 700 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 701 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 702 #endif
 703 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 704 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 705 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 706 #ifdef CONFIG_PHYS_64BIT
 707 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 708 #else
 709 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 710 #endif
 711 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 712
 713 /* controller 1, Slot 2, tgtid 1, Base address a000 */
 714 #define CONFIG_SYS_PCIE1_NAME           "mini PCIe SLOT"
 715 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 716 #ifdef CONFIG_PHYS_64BIT
 717 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 718 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 719 #else
 720 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 721 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 722 #endif
 723 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 724 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
 725 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 726 #ifdef CONFIG_PHYS_64BIT
 727 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc00000ull
 728 #else
 729 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc00000
 730 #endif
 731 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 732
 733 #define CONFIG_PCI_PNP  /* do pci plug-and-play */
 734 #define CONFIG_E1000    /* Defind e1000 pci Ethernet card*/
 735 #define CONFIG_CMD_PCI
 736 #define CONFIG_CMD_NET
 737
 738 #define CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 739 #define CONFIG_DOS_PARTITION
 740 #endif /* CONFIG_PCI */
 741
 742 #if defined(CONFIG_TSEC_ENET)
 743 #define CONFIG_MII              /* MII PHY management */
 744 #define CONFIG_TSEC1
 745 #define CONFIG_TSEC1_NAME       "eTSEC1"
 746 #define CONFIG_TSEC2
 747 #define CONFIG_TSEC2_NAME       "eTSEC2"
 748 #define CONFIG_TSEC3
 749 #define CONFIG_TSEC3_NAME       "eTSEC3"
 750
 751 #define TSEC1_PHY_ADDR  2
 752 #define TSEC2_PHY_ADDR  0
 753 #define TSEC3_PHY_ADDR  1
 754
 755 #define TSEC1_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 756 #define TSEC2_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 757 #define TSEC3_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 758
 759 #define TSEC1_PHYIDX    0
 760 #define TSEC2_PHYIDX    0
 761 #define TSEC3_PHYIDX    0
 762
 763 #define CONFIG_ETHPRIME "eTSEC1"
 764
 765 #define CONFIG_PHY_GIGE 1       /* Include GbE speed/duplex detection */
 766
 767 #define CONFIG_HAS_ETH0
 768 #define CONFIG_HAS_ETH1
 769 #define CONFIG_HAS_ETH2
 770 #endif /* CONFIG_TSEC_ENET */
 771
 772 #ifdef CONFIG_QE
 773 /* QE microcode/firmware address */
 774 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 775 #define CONFIG_SYS_QE_FW_ADDR   0xefec0000
 776 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 777 #endif /* CONFIG_QE */
 778
 779 #ifdef CONFIG_P1025RDB
 780 /*
 781  * QE UEC ethernet configuration
 782  */
 783 #define CONFIG_MIIM_ADDRESS     (CONFIG_SYS_CCSRBAR + 0x82120)
 784
 785 #undef CONFIG_UEC_ETH
 786 #define CONFIG_PHY_MODE_NEED_CHANGE
 787
 788 #define CONFIG_UEC_ETH1 /* ETH1 */
 789 #define CONFIG_HAS_ETH0
 790
 791 #ifdef CONFIG_UEC_ETH1
 792 #define CONFIG_SYS_UEC1_UCC_NUM 0       /* UCC1 */
 793 #define CONFIG_SYS_UEC1_RX_CLK  QE_CLK12 /* CLK12 for MII */
 794 #define CONFIG_SYS_UEC1_TX_CLK  QE_CLK9 /* CLK9 for MII */
 795 #define CONFIG_SYS_UEC1_ETH_TYPE        FAST_ETH
 796 #define CONFIG_SYS_UEC1_PHY_ADDR        0x0     /* 0x0 for MII */
 797 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 798 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
 799 #endif /* CONFIG_UEC_ETH1 */
 800
 801 #define CONFIG_UEC_ETH5 /* ETH5 */
 802 #define CONFIG_HAS_ETH1
 803
 804 #ifdef CONFIG_UEC_ETH5
 805 #define CONFIG_SYS_UEC5_UCC_NUM 4       /* UCC5 */
 806 #define CONFIG_SYS_UEC5_RX_CLK  QE_CLK_NONE
 807 #define CONFIG_SYS_UEC5_TX_CLK  QE_CLK13 /* CLK 13 for RMII */
 808 #define CONFIG_SYS_UEC5_ETH_TYPE        FAST_ETH
 809 #define CONFIG_SYS_UEC5_PHY_ADDR        0x3     /* 0x3 for RMII */
 810 #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 811 #define CONFIG_SYS_UEC5_INTERFACE_SPEED 100
 812 #endif /* CONFIG_UEC_ETH5 */
 813 #endif /* CONFIG_P1025RDB */
 814
 815 /*
 816  * Environment
 817  */
 818 #ifdef CONFIG_SPIFLASH
 819 #define CONFIG_ENV_IS_IN_SPI_FLASH
 820 #define CONFIG_ENV_SPI_BUS      0
 821 #define CONFIG_ENV_SPI_CS       0
 822 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 823 #define CONFIG_ENV_SPI_MODE     0
 824 #define CONFIG_ENV_SIZE         0x2000  /* 8KB */
 825 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 826 #define CONFIG_ENV_SECT_SIZE    0x10000
 827 #elif defined(CONFIG_SDCARD)
 828 #define CONFIG_ENV_IS_IN_MMC
 829 #define CONFIG_FSL_FIXED_MMC_LOCATION
 830 #define CONFIG_ENV_SIZE         0x2000
 831 #define CONFIG_SYS_MMC_ENV_DEV  0
 832 #elif defined(CONFIG_NAND)
 833 #ifdef CONFIG_TPL_BUILD
 834 #define CONFIG_ENV_SIZE         0x2000
 835 #define CONFIG_ENV_ADDR         (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 836 #else
 837 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 838 #endif
 839 #define CONFIG_ENV_IS_IN_NAND
 840 #define CONFIG_ENV_OFFSET       (1024 * 1024)
 841 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE)
 842 #elif defined(CONFIG_SYS_RAMBOOT)
 843 #define CONFIG_ENV_IS_NOWHERE   /* Store ENV in memory only */
 844 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 845 #define CONFIG_ENV_SIZE         0x2000
 846 #else
 847 #define CONFIG_ENV_IS_IN_FLASH
 848 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 849 #define CONFIG_ENV_SIZE         0x2000
 850 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 851 #endif
 852
 853 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 854 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 855
 856 /*
 857  * Command line configuration.
 858  */
 859 #include <config_cmd_default.h>
 860
 861 #define CONFIG_CMD_IRQ
 862 #define CONFIG_CMD_PING
 863 #define CONFIG_CMD_I2C
 864 #define CONFIG_CMD_MII
 865 #define CONFIG_CMD_DATE
 866 #define CONFIG_CMD_ELF
 867 #define CONFIG_CMD_SETEXPR
 868 #define CONFIG_CMD_REGINFO
 869
 870 /*
 871  * USB
 872  */
 873 #define CONFIG_HAS_FSL_DR_USB
 874
 875 #if defined(CONFIG_HAS_FSL_DR_USB)
 876 #define CONFIG_USB_EHCI
 877
 878 #ifdef CONFIG_USB_EHCI
 879 #define CONFIG_CMD_USB
 880 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 881 #define CONFIG_USB_EHCI_FSL
 882 #define CONFIG_USB_STORAGE
 883 #endif
 884 #endif
 885
 886 #define CONFIG_MMC
 887
 888 #ifdef CONFIG_MMC
 889 #define CONFIG_FSL_ESDHC
 890 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 891 #define CONFIG_CMD_MMC
 892 #define CONFIG_GENERIC_MMC
 893 #endif
 894
 895 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \
 896                  || defined(CONFIG_FSL_SATA)
 897 #define CONFIG_CMD_EXT2
 898 #define CONFIG_CMD_FAT
 899 #define CONFIG_DOS_PARTITION
 900 #endif
 901
 902 #undef CONFIG_WATCHDOG  /* watchdog disabled */
 903
 904 /*
 905  * Miscellaneous configurable options
 906  */
 907 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 908 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 909 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 910 #if defined(CONFIG_CMD_KGDB)
 911 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 912 #else
 913 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 914 #endif
 915 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 916         /* Print Buffer Size */
 917 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 918 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 919
 920 /*
 921  * For booting Linux, the board info and command line data
 922  * have to be in the first 64 MB of memory, since this is
 923  * the maximum mapped by the Linux kernel during initialization.
 924  */
 925 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory for Linux*/
 926 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 927
 928 #if defined(CONFIG_CMD_KGDB)
 929 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 930 #endif
 931
 932 /*
 933  * Environment Configuration
 934  */
 935 #define CONFIG_HOSTNAME         unknown
 936 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 937 #define CONFIG_BOOTFILE         "uImage"
 938 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 939
 940 /* default location for tftp and bootm */
 941 #define CONFIG_LOADADDR 1000000
 942
 943 #define CONFIG_BOOTDELAY 10     /* -1 disables auto-boot */
 944 #define CONFIG_BOOTARGS /* the boot command will set bootargs */
 945
 946 #define CONFIG_BAUDRATE 115200
 947
 948 #ifdef __SW_BOOT_NOR
 949 #define __NOR_RST_CMD   \
 950 norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \
 951 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 952 #endif
 953 #ifdef __SW_BOOT_SPI
 954 #define __SPI_RST_CMD   \
 955 spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \
 956 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 957 #endif
 958 #ifdef __SW_BOOT_SD
 959 #define __SD_RST_CMD    \
 960 sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \
 961 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 962 #endif
 963 #ifdef __SW_BOOT_NAND
 964 #define __NAND_RST_CMD  \
 965 nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \
 966 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 967 #endif
 968 #ifdef __SW_BOOT_PCIE
 969 #define __PCIE_RST_CMD  \
 970 pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \
 971 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 972 #endif
 973
 974 #define CONFIG_EXTRA_ENV_SETTINGS       \
 975 "netdev=eth0\0" \
 976 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"     \
 977 "loadaddr=1000000\0"    \
 978 "bootfile=uImage\0"     \
 979 "tftpflash=tftpboot $loadaddr $uboot; " \
 980         "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
 981         "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; "      \
 982         "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \
 983         "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
 984         "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
 985 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"    \
 986 "consoledev=ttyS0\0"    \
 987 "ramdiskaddr=2000000\0" \
 988 "ramdiskfile=rootfs.ext2.gz.uboot\0"    \
 989 "fdtaddr=c00000\0"      \
 990 "bdev=sda1\0" \
 991 "jffs2nor=mtdblock3\0"  \
 992 "norbootaddr=ef080000\0"        \
 993 "norfdtaddr=ef040000\0" \
 994 "jffs2nand=mtdblock9\0" \
 995 "nandbootaddr=100000\0" \
 996 "nandfdtaddr=80000\0"           \
 997 "ramdisk_size=120000\0" \
 998 "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \
 999 "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \
1000 __stringify(__NOR_RST_CMD)"\0" \
1001 __stringify(__SPI_RST_CMD)"\0" \
1002 __stringify(__SD_RST_CMD)"\0" \
1003 __stringify(__NAND_RST_CMD)"\0" \
1004 __stringify(__PCIE_RST_CMD)"\0"
1005
1006 #define CONFIG_NFSBOOTCOMMAND   \
1007 "setenv bootargs root=/dev/nfs rw "     \
1008 "nfsroot=$serverip:$rootpath "  \
1009 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
1010 "console=$consoledev,$baudrate $othbootargs;" \
1011 "tftp $loadaddr $bootfile;"     \
1012 "tftp $fdtaddr $fdtfile;"       \
1013 "bootm $loadaddr - $fdtaddr"
1014
1015 #define CONFIG_HDBOOT   \
1016 "setenv bootargs root=/dev/$bdev rw rootdelay=30 "      \
1017 "console=$consoledev,$baudrate $othbootargs;" \
1018 "usb start;"    \
1019 "ext2load usb 0:1 $loadaddr /boot/$bootfile;"   \
1020 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"     \
1021 "bootm $loadaddr - $fdtaddr"
1022
1023 #define CONFIG_USB_FAT_BOOT     \
1024 "setenv bootargs root=/dev/ram rw "     \
1025 "console=$consoledev,$baudrate $othbootargs " \
1026 "ramdisk_size=$ramdisk_size;"   \
1027 "usb start;"    \
1028 "fatload usb 0:2 $loadaddr $bootfile;"  \
1029 "fatload usb 0:2 $fdtaddr $fdtfile;"    \
1030 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"    \
1031 "bootm $loadaddr $ramdiskaddr $fdtaddr"
1032
1033 #define CONFIG_USB_EXT2_BOOT    \
1034 "setenv bootargs root=/dev/ram rw "     \
1035 "console=$consoledev,$baudrate $othbootargs " \
1036 "ramdisk_size=$ramdisk_size;"   \
1037 "usb start;"    \
1038 "ext2load usb 0:4 $loadaddr $bootfile;" \
1039 "ext2load usb 0:4 $fdtaddr $fdtfile;" \
1040 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
1041 "bootm $loadaddr $ramdiskaddr $fdtaddr"
1042
1043 #define CONFIG_NORBOOT  \
1044 "setenv bootargs root=/dev/$jffs2nor rw "       \
1045 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;"  \
1046 "bootm $norbootaddr - $norfdtaddr"
1047
1048 #define CONFIG_RAMBOOTCOMMAND   \
1049 "setenv bootargs root=/dev/ram rw "     \
1050 "console=$consoledev,$baudrate $othbootargs " \
1051 "ramdisk_size=$ramdisk_size;"   \
1052 "tftp $ramdiskaddr $ramdiskfile;"       \
1053 "tftp $loadaddr $bootfile;"     \
1054 "tftp $fdtaddr $fdtfile;"       \
1055 "bootm $loadaddr $ramdiskaddr $fdtaddr"
1056
1057 #define CONFIG_BOOTCOMMAND      CONFIG_HDBOOT
1058
1059 #endif /* __CONFIG_H */