include/configs/p1_p2_rdb_pc.h

   1 /*
   2  * Copyright 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * QorIQ RDB boards configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #define CONFIG_SYS_GENERIC_BOARD
  14 #define CONFIG_DISPLAY_BOARDINFO
  15
  16 #ifdef CONFIG_36BIT
  17 #define CONFIG_PHYS_64BIT
  18 #endif
  19
  20 #if defined(CONFIG_P1020MBG)
  21 #define CONFIG_BOARDNAME "P1020MBG-PC"
  22 #define CONFIG_P1020
  23 #define CONFIG_VSC7385_ENET
  24 #define CONFIG_SLIC
  25 #define __SW_BOOT_MASK          0x03
  26 #define __SW_BOOT_NOR           0xe4
  27 #define __SW_BOOT_SD            0x54
  28 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  29 #endif
  30
  31 #if defined(CONFIG_P1020UTM)
  32 #define CONFIG_BOARDNAME "P1020UTM-PC"
  33 #define CONFIG_P1020
  34 #define __SW_BOOT_MASK          0x03
  35 #define __SW_BOOT_NOR           0xe0
  36 #define __SW_BOOT_SD            0x50
  37 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  38 #endif
  39
  40 #if defined(CONFIG_P1020RDB_PC)
  41 #define CONFIG_BOARDNAME "P1020RDB-PC"
  42 #define CONFIG_NAND_FSL_ELBC
  43 #define CONFIG_P1020
  44 #define CONFIG_SPI_FLASH
  45 #define CONFIG_VSC7385_ENET
  46 #define CONFIG_SLIC
  47 #define __SW_BOOT_MASK          0x03
  48 #define __SW_BOOT_NOR           0x5c
  49 #define __SW_BOOT_SPI           0x1c
  50 #define __SW_BOOT_SD            0x9c
  51 #define __SW_BOOT_NAND          0xec
  52 #define __SW_BOOT_PCIE          0x6c
  53 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  54 #endif
  55
  56 /*
  57  * P1020RDB-PD board has user selectable switches for evaluating different
  58  * frequency and boot options for the P1020 device. The table that
  59  * follow describe the available options. The front six binary number was in
  60  * accordance with SW3[1:6].
  61  * 111101 533 533 267 667 NOR Core0 boot; Core1 hold-off
  62  * 101101 667 667 333 667 NOR Core0 boot; Core1 hold-off
  63  * 011001 800 800 400 667 NOR Core0 boot; Core1 hold-off
  64  * 001001 800 800 400 667 SD/MMC Core0 boot; Core1 hold-off
  65  * 001101 800 800 400 667 SPI Core0 boot; Core1 hold-off
  66  * 010001 800 800 400 667 NAND Core0 boot; Core1 hold-off
  67  * 011101 800 800 400 667 PCIe-2 Core0 boot; Core1 hold-off
  68  */
  69 #if defined(CONFIG_P1020RDB_PD)
  70 #define CONFIG_BOARDNAME "P1020RDB-PD"
  71 #define CONFIG_NAND_FSL_ELBC
  72 #define CONFIG_P1020
  73 #define CONFIG_SPI_FLASH
  74 #define CONFIG_VSC7385_ENET
  75 #define CONFIG_SLIC
  76 #define __SW_BOOT_MASK          0x03
  77 #define __SW_BOOT_NOR           0x64
  78 #define __SW_BOOT_SPI           0x34
  79 #define __SW_BOOT_SD            0x24
  80 #define __SW_BOOT_NAND          0x44
  81 #define __SW_BOOT_PCIE          0x74
  82 #define CONFIG_SYS_L2_SIZE      (256 << 10)
  83 #endif
  84
  85 #if defined(CONFIG_P1021RDB)
  86 #define CONFIG_BOARDNAME "P1021RDB-PC"
  87 #define CONFIG_NAND_FSL_ELBC
  88 #define CONFIG_P1021
  89 #define CONFIG_QE
  90 #define CONFIG_SPI_FLASH
  91 #define CONFIG_VSC7385_ENET
  92 #define CONFIG_SYS_LBC_LBCR     0x00080000      /* Implement conversion of
  93                                                 addresses in the LBC */
  94 #define __SW_BOOT_MASK          0x03
  95 #define __SW_BOOT_NOR           0x5c
  96 #define __SW_BOOT_SPI           0x1c
  97 #define __SW_BOOT_SD            0x9c
  98 #define __SW_BOOT_NAND          0xec
  99 #define __SW_BOOT_PCIE          0x6c
 100 #define CONFIG_SYS_L2_SIZE      (256 << 10)
 101 #endif
 102
 103 #if defined(CONFIG_P1024RDB)
 104 #define CONFIG_BOARDNAME "P1024RDB"
 105 #define CONFIG_NAND_FSL_ELBC
 106 #define CONFIG_P1024
 107 #define CONFIG_SLIC
 108 #define CONFIG_SPI_FLASH
 109 #define __SW_BOOT_MASK          0xf3
 110 #define __SW_BOOT_NOR           0x00
 111 #define __SW_BOOT_SPI           0x08
 112 #define __SW_BOOT_SD            0x04
 113 #define __SW_BOOT_NAND          0x0c
 114 #define CONFIG_SYS_L2_SIZE      (256 << 10)
 115 #endif
 116
 117 #if defined(CONFIG_P1025RDB)
 118 #define CONFIG_BOARDNAME "P1025RDB"
 119 #define CONFIG_NAND_FSL_ELBC
 120 #define CONFIG_P1025
 121 #define CONFIG_QE
 122 #define CONFIG_SLIC
 123 #define CONFIG_SPI_FLASH
 124
 125 #define CONFIG_SYS_LBC_LBCR     0x00080000      /* Implement conversion of
 126                                                 addresses in the LBC */
 127 #define __SW_BOOT_MASK          0xf3
 128 #define __SW_BOOT_NOR           0x00
 129 #define __SW_BOOT_SPI           0x08
 130 #define __SW_BOOT_SD            0x04
 131 #define __SW_BOOT_NAND          0x0c
 132 #define CONFIG_SYS_L2_SIZE      (256 << 10)
 133 #endif
 134
 135 #if defined(CONFIG_P2020RDB)
 136 #define CONFIG_BOARDNAME "P2020RDB-PCA"
 137 #define CONFIG_NAND_FSL_ELBC
 138 #define CONFIG_P2020
 139 #define CONFIG_SPI_FLASH
 140 #define CONFIG_VSC7385_ENET
 141 #define __SW_BOOT_MASK          0x03
 142 #define __SW_BOOT_NOR           0xc8
 143 #define __SW_BOOT_SPI           0x28
 144 #define __SW_BOOT_SD            0x68 /* or 0x18 */
 145 #define __SW_BOOT_NAND          0xe8
 146 #define __SW_BOOT_PCIE          0xa8
 147 #define CONFIG_SYS_L2_SIZE      (512 << 10)
 148 #endif
 149
 150 #ifdef CONFIG_SDCARD
 151 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 152 #define CONFIG_SPL_ENV_SUPPORT
 153 #define CONFIG_SPL_SERIAL_SUPPORT
 154 #define CONFIG_SPL_MMC_SUPPORT
 155 #define CONFIG_SPL_MMC_MINIMAL
 156 #define CONFIG_SPL_FLUSH_IMAGE
 157 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 158 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 159 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 160 #define CONFIG_SPL_I2C_SUPPORT
 161 #define CONFIG_FSL_LAW                 /* Use common FSL init code */
 162 #define CONFIG_SYS_TEXT_BASE            0x11001000
 163 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
 164 #define CONFIG_SPL_PAD_TO               0x20000
 165 #define CONFIG_SPL_MAX_SIZE             (128 * 1024)
 166 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
 167 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x11000000)
 168 #define CONFIG_SYS_MMC_U_BOOT_START     (0x11000000)
 169 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (128 << 10)
 170 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 171 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 172 #define CONFIG_SPL_MMC_BOOT
 173 #ifdef CONFIG_SPL_BUILD
 174 #define CONFIG_SPL_COMMON_INIT_DDR
 175 #endif
 176 #endif
 177
 178 #ifdef CONFIG_SPIFLASH
 179 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 180 #define CONFIG_SPL_ENV_SUPPORT
 181 #define CONFIG_SPL_SERIAL_SUPPORT
 182 #define CONFIG_SPL_SPI_SUPPORT
 183 #define CONFIG_SPL_SPI_FLASH_SUPPORT
 184 #define CONFIG_SPL_SPI_FLASH_MINIMAL
 185 #define CONFIG_SPL_FLUSH_IMAGE
 186 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 187 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 188 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 189 #define CONFIG_SPL_I2C_SUPPORT
 190 #define CONFIG_FSL_LAW         /* Use common FSL init code */
 191 #define CONFIG_SYS_TEXT_BASE            0x11001000
 192 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
 193 #define CONFIG_SPL_PAD_TO               0x20000
 194 #define CONFIG_SPL_MAX_SIZE             (128 * 1024)
 195 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
 196 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x11000000)
 197 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x11000000)
 198 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (128 << 10)
 199 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 200 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
 201 #define CONFIG_SPL_SPI_BOOT
 202 #ifdef CONFIG_SPL_BUILD
 203 #define CONFIG_SPL_COMMON_INIT_DDR
 204 #endif
 205 #endif
 206
 207 #ifdef CONFIG_NAND
 208 #ifdef CONFIG_TPL_BUILD
 209 #define CONFIG_SPL_NAND_BOOT
 210 #define CONFIG_SPL_FLUSH_IMAGE
 211 #define CONFIG_SPL_ENV_SUPPORT
 212 #define CONFIG_SPL_NAND_INIT
 213 #define CONFIG_SPL_SERIAL_SUPPORT
 214 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 215 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 216 #define CONFIG_SPL_I2C_SUPPORT
 217 #define CONFIG_SPL_NAND_SUPPORT
 218 #define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT
 219 #define CONFIG_SPL_COMMON_INIT_DDR
 220 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
 221 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
 222 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
 223 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (832 << 10)
 224 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
 225 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
 226 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
 227 #elif defined(CONFIG_SPL_BUILD)
 228 #define CONFIG_SPL_INIT_MINIMAL
 229 #define CONFIG_SPL_SERIAL_SUPPORT
 230 #define CONFIG_SPL_NAND_SUPPORT
 231 #define CONFIG_SPL_FLUSH_IMAGE
 232 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 233 #define CONFIG_SPL_TEXT_BASE            0xff800000
 234 #define CONFIG_SPL_MAX_SIZE             4096
 235 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
 236 #define CONFIG_SYS_NAND_U_BOOT_DST      0xf8f80000
 237 #define CONFIG_SYS_NAND_U_BOOT_START    0xf8f80000
 238 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
 239 #endif /* not CONFIG_TPL_BUILD */
 240
 241 #define CONFIG_SPL_PAD_TO               0x20000
 242 #define CONFIG_TPL_PAD_TO               0x20000
 243 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
 244 #define CONFIG_SYS_TEXT_BASE            0x11001000
 245 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
 246 #endif
 247
 248 #ifndef CONFIG_SYS_TEXT_BASE
 249 #define CONFIG_SYS_TEXT_BASE            0xeff40000
 250 #endif
 251
 252 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 253 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 254 #endif
 255
 256 #ifndef CONFIG_SYS_MONITOR_BASE
 257 #ifdef CONFIG_SPL_BUILD
 258 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 259 #else
 260 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 261 #endif
 262 #endif
 263
 264 /* High Level Configuration Options */
 265 #define CONFIG_BOOKE
 266 #define CONFIG_E500
 267
 268 #define CONFIG_MP
 269
 270 #define CONFIG_FSL_ELBC
 271 #define CONFIG_PCI
 272 #define CONFIG_PCIE1    /* PCIE controler 1 (slot 1) */
 273 #define CONFIG_PCIE2    /* PCIE controler 2 (slot 2) */
 274 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
 275 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
 276 #define CONFIG_FSL_PCIE_RESET   /* need PCIe reset errata */
 277 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
 278
 279 #define CONFIG_FSL_LAW
 280 #define CONFIG_TSEC_ENET        /* tsec ethernet support */
 281 #define CONFIG_ENV_OVERWRITE
 282
 283 #define CONFIG_CMD_SATA
 284 #define CONFIG_SATA_SIL
 285 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 286 #define CONFIG_LIBATA
 287 #define CONFIG_LBA48
 288
 289 #if defined(CONFIG_P2020RDB)
 290 #define CONFIG_SYS_CLK_FREQ     100000000
 291 #else
 292 #define CONFIG_SYS_CLK_FREQ     66666666
 293 #endif
 294 #define CONFIG_DDR_CLK_FREQ     66666666
 295
 296 #define CONFIG_HWCONFIG
 297 /*
 298  * These can be toggled for performance analysis, otherwise use default.
 299  */
 300 #define CONFIG_L2_CACHE
 301 #define CONFIG_BTB
 302
 303 #define CONFIG_BOARD_EARLY_INIT_F       /* Call board_pre_init */
 304
 305 #define CONFIG_ENABLE_36BIT_PHYS
 306
 307 #ifdef CONFIG_PHYS_64BIT
 308 #define CONFIG_ADDR_MAP                 1
 309 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
 310 #endif
 311
 312 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 313 #define CONFIG_SYS_MEMTEST_END          0x1fffffff
 314 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 315
 316 #define CONFIG_SYS_CCSRBAR              0xffe00000
 317 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 318
 319 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
 320        SPL code*/
 321 #ifdef CONFIG_SPL_BUILD
 322 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 323 #endif
 324
 325 /* DDR Setup */
 326 #define CONFIG_SYS_FSL_DDR3
 327 #define CONFIG_SYS_DDR_RAW_TIMING
 328 #define CONFIG_DDR_SPD
 329 #define CONFIG_SYS_SPD_BUS_NUM 1
 330 #define SPD_EEPROM_ADDRESS 0x52
 331 #undef CONFIG_FSL_DDR_INTERACTIVE
 332
 333 #if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD))
 334 #define CONFIG_SYS_SDRAM_SIZE_LAW       LAW_SIZE_2G
 335 #define CONFIG_CHIP_SELECTS_PER_CTRL    2
 336 #else
 337 #define CONFIG_SYS_SDRAM_SIZE_LAW       LAW_SIZE_1G
 338 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
 339 #endif
 340 #define CONFIG_SYS_SDRAM_SIZE           (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
 341 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 342 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 343
 344 #define CONFIG_NUM_DDR_CONTROLLERS      1
 345 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 346
 347 /* Default settings for DDR3 */
 348 #ifndef CONFIG_P2020RDB
 349 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003f
 350 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014302
 351 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
 352 #define CONFIG_SYS_DDR_CS1_BNDS         0x0040007f
 353 #define CONFIG_SYS_DDR_CS1_CONFIG       0x80014302
 354 #define CONFIG_SYS_DDR_CS1_CONFIG_2     0x00000000
 355
 356 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 357 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
 358 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
 359 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 360
 361 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 362 #define CONFIG_SYS_DDR_WRLVL_CONTROL    0x8655A608
 363 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 364 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 365 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 366 #define CONFIG_SYS_DDR_CONTROL          0xC70C0000      /* Type = DDR3  */
 367 #define CONFIG_SYS_DDR_CONTROL_2        0x04401050
 368 #define CONFIG_SYS_DDR_TIMING_4         0x00220001
 369 #define CONFIG_SYS_DDR_TIMING_5         0x03402400
 370
 371 #define CONFIG_SYS_DDR_TIMING_3         0x00020000
 372 #define CONFIG_SYS_DDR_TIMING_0         0x00330004
 373 #define CONFIG_SYS_DDR_TIMING_1         0x6f6B4846
 374 #define CONFIG_SYS_DDR_TIMING_2         0x0FA8C8CF
 375 #define CONFIG_SYS_DDR_CLK_CTRL         0x03000000
 376 #define CONFIG_SYS_DDR_MODE_1           0x40461520
 377 #define CONFIG_SYS_DDR_MODE_2           0x8000c000
 378 #define CONFIG_SYS_DDR_INTERVAL         0x0C300000
 379 #endif
 380
 381 #undef CONFIG_CLOCKS_IN_MHZ
 382
 383 /*
 384  * Memory map
 385  *
 386  * 0x0000_0000 0x7fff_ffff      DDR             Up to 2GB cacheable
 387  * 0x8000_0000 0xdfff_ffff      PCI Express Mem 1.5G non-cacheable(PCIe * 3)
 388  * 0xec00_0000 0xefff_ffff      NOR flash       Up to 64M non-cacheable CS0/1
 389  * 0xf8f8_0000 0xf8ff_ffff      L2 SRAM         Up to 512K cacheable
 390  *   (early boot only)
 391  * 0xff80_0000 0xff80_7fff      NAND flash      32K non-cacheable       CS1/0
 392  * 0xff98_0000 0xff98_ffff      PMC             64K non-cacheable       CS2
 393  * 0xffa0_0000 0xffaf_ffff      CPLD            1M non-cacheable        CS3
 394  * 0xffb0_0000 0xffbf_ffff      VSC7385 switch  1M non-cacheable        CS2
 395  * 0xffc0_0000 0xffc3_ffff      PCI IO range    256k non-cacheable
 396  * 0xffd0_0000 0xffd0_3fff      L1 for stack    16K cacheable
 397  * 0xffe0_0000 0xffef_ffff      CCSR            1M non-cacheable
 398  */
 399
 400
 401 /*
 402  * Local Bus Definitions
 403  */
 404 #if (defined(CONFIG_P1020MBG) || defined(CONFIG_P1020RDB_PD))
 405 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* 64M */
 406 #define CONFIG_SYS_FLASH_BASE           0xec000000
 407 #elif defined(CONFIG_P1020UTM)
 408 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* 32M */
 409 #define CONFIG_SYS_FLASH_BASE           0xee000000
 410 #else
 411 #define CONFIG_SYS_MAX_FLASH_SECT       128     /* 16M */
 412 #define CONFIG_SYS_FLASH_BASE           0xef000000
 413 #endif
 414
 415
 416 #ifdef CONFIG_PHYS_64BIT
 417 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 418 #else
 419 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 420 #endif
 421
 422 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
 423         | BR_PS_16 | BR_V)
 424
 425 #define CONFIG_FLASH_OR_PRELIM  0xfc000ff7
 426
 427 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 428 #define CONFIG_SYS_FLASH_QUIET_TEST
 429 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 430
 431 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 432
 433 #undef CONFIG_SYS_FLASH_CHECKSUM
 434 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 435 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 436
 437 #define CONFIG_FLASH_CFI_DRIVER
 438 #define CONFIG_SYS_FLASH_CFI
 439 #define CONFIG_SYS_FLASH_EMPTY_INFO
 440 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 441
 442 /* Nand Flash */
 443 #ifdef CONFIG_NAND_FSL_ELBC
 444 #define CONFIG_SYS_NAND_BASE            0xff800000
 445 #ifdef CONFIG_PHYS_64BIT
 446 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 447 #else
 448 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 449 #endif
 450
 451 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 452 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 453 #define CONFIG_MTD_NAND_VERIFY_WRITE
 454 #define CONFIG_CMD_NAND
 455 #if defined(CONFIG_P1020RDB_PD)
 456 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 457 #else
 458 #define CONFIG_SYS_NAND_BLOCK_SIZE      (16 * 1024)
 459 #endif
 460
 461 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 462         | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 463         | BR_PS_8       /* Port Size = 8 bit */ \
 464         | BR_MS_FCM     /* MSEL = FCM */ \
 465         | BR_V) /* valid */
 466 #if defined(CONFIG_P1020RDB_PD)
 467 #define CONFIG_SYS_NAND_OR_PRELIM       (OR_AM_32KB \
 468         | OR_FCM_PGS    /* Large Page*/ \
 469         | OR_FCM_CSCT \
 470         | OR_FCM_CST \
 471         | OR_FCM_CHT \
 472         | OR_FCM_SCY_1 \
 473         | OR_FCM_TRLX \
 474         | OR_FCM_EHTR)
 475 #else
 476 #define CONFIG_SYS_NAND_OR_PRELIM       (OR_AM_32KB     /* small page */ \
 477         | OR_FCM_CSCT \
 478         | OR_FCM_CST \
 479         | OR_FCM_CHT \
 480         | OR_FCM_SCY_1 \
 481         | OR_FCM_TRLX \
 482         | OR_FCM_EHTR)
 483 #endif
 484 #endif /* CONFIG_NAND_FSL_ELBC */
 485
 486 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 487
 488 #define CONFIG_SYS_INIT_RAM_LOCK
 489 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* stack in RAM */
 490 #ifdef CONFIG_PHYS_64BIT
 491 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf
 492 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR
 493 /* The assembler doesn't like typecast */
 494 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 495         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 496           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 497 #else
 498 /* Initial L1 address */
 499 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
 500 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 501 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 502 #endif
 503 /* Size of used area in RAM */
 504 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 505
 506 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 507                                         GENERATED_GBL_DATA_SIZE)
 508 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 509
 510 #define CONFIG_SYS_MONITOR_LEN  (768 * 1024)
 511 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024)/* Reserved for malloc */
 512
 513 #define CONFIG_SYS_CPLD_BASE    0xffa00000
 514 #ifdef CONFIG_PHYS_64BIT
 515 #define CONFIG_SYS_CPLD_BASE_PHYS       0xfffa00000ull
 516 #else
 517 #define CONFIG_SYS_CPLD_BASE_PHYS       CONFIG_SYS_CPLD_BASE
 518 #endif
 519 /* CPLD config size: 1Mb */
 520 #define CONFIG_CPLD_BR_PRELIM   (BR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) | \
 521                                         BR_PS_8 | BR_V)
 522 #define CONFIG_CPLD_OR_PRELIM   (0xfff009f7)
 523
 524 #define CONFIG_SYS_PMC_BASE     0xff980000
 525 #define CONFIG_SYS_PMC_BASE_PHYS        CONFIG_SYS_PMC_BASE
 526 #define CONFIG_PMC_BR_PRELIM    (BR_PHYS_ADDR(CONFIG_SYS_PMC_BASE_PHYS) | \
 527                                         BR_PS_8 | BR_V)
 528 #define CONFIG_PMC_OR_PRELIM    (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
 529                                  OR_GPCM_SCY | OR_GPCM_TRLX | OR_GPCM_EHTR | \
 530                                  OR_GPCM_EAD)
 531
 532 #ifdef CONFIG_NAND
 533 #define CONFIG_SYS_BR0_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
 534 #define CONFIG_SYS_OR0_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 535 #define CONFIG_SYS_BR1_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 536 #define CONFIG_SYS_OR1_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 537 #else
 538 #define CONFIG_SYS_BR0_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 539 #define CONFIG_SYS_OR0_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 540 #ifdef CONFIG_NAND_FSL_ELBC
 541 #define CONFIG_SYS_BR1_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Addr */
 542 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 543 #endif
 544 #endif
 545 #define CONFIG_SYS_BR3_PRELIM   CONFIG_CPLD_BR_PRELIM   /* CPLD Base Address */
 546 #define CONFIG_SYS_OR3_PRELIM   CONFIG_CPLD_OR_PRELIM   /* CPLD Options */
 547
 548
 549 /* Vsc7385 switch */
 550 #ifdef CONFIG_VSC7385_ENET
 551 #define CONFIG_SYS_VSC7385_BASE         0xffb00000
 552
 553 #ifdef CONFIG_PHYS_64BIT
 554 #define CONFIG_SYS_VSC7385_BASE_PHYS    0xfffb00000ull
 555 #else
 556 #define CONFIG_SYS_VSC7385_BASE_PHYS    CONFIG_SYS_VSC7385_BASE
 557 #endif
 558
 559 #define CONFIG_SYS_VSC7385_BR_PRELIM    \
 560         (BR_PHYS_ADDR(CONFIG_SYS_VSC7385_BASE_PHYS) | BR_PS_8 | BR_V)
 561 #define CONFIG_SYS_VSC7385_OR_PRELIM    (OR_AM_128KB | OR_GPCM_CSNT | \
 562                         OR_GPCM_XACS |  OR_GPCM_SCY_15 | OR_GPCM_SETA | \
 563                         OR_GPCM_TRLX |  OR_GPCM_EHTR | OR_GPCM_EAD)
 564
 565 #define CONFIG_SYS_BR2_PRELIM   CONFIG_SYS_VSC7385_BR_PRELIM
 566 #define CONFIG_SYS_OR2_PRELIM   CONFIG_SYS_VSC7385_OR_PRELIM
 567
 568 /* The size of the VSC7385 firmware image */
 569 #define CONFIG_VSC7385_IMAGE_SIZE       8192
 570 #endif
 571
 572 /*
 573  * Config the L2 Cache as L2 SRAM
 574 */
 575 #if defined(CONFIG_SPL_BUILD)
 576 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 577 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 578 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 579 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 580 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 581 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 582 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024)
 583 #define CONFIG_SPL_RELOC_STACK_SIZE     (32 << 10)
 584 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024)
 585 #if defined(CONFIG_P2020RDB)
 586 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (364 << 10)
 587 #else
 588 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (108 << 10)
 589 #endif
 590 #elif defined(CONFIG_NAND)
 591 #ifdef CONFIG_TPL_BUILD
 592 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 593 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 594 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 595 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 596 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
 597 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
 598 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
 599 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
 600 #else
 601 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 602 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 603 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 604 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x2000)
 605 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 606 #endif /* CONFIG_TPL_BUILD */
 607 #endif
 608 #endif
 609
 610 /* Serial Port - controlled on board with jumper J8
 611  * open - index 2
 612  * shorted - index 1
 613  */
 614 #define CONFIG_CONS_INDEX               1
 615 #undef CONFIG_SERIAL_SOFTWARE_FIFO
 616 #define CONFIG_SYS_NS16550
 617 #define CONFIG_SYS_NS16550_SERIAL
 618 #define CONFIG_SYS_NS16550_REG_SIZE     1
 619 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 620 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 621 #define CONFIG_NS16550_MIN_FUNCTIONS
 622 #endif
 623
 624 #define CONFIG_SYS_BAUDRATE_TABLE       \
 625         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 626
 627 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 628 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 629
 630 /* Use the HUSH parser */
 631 #define CONFIG_SYS_HUSH_PARSER
 632
 633 /*
 634  * Pass open firmware flat tree
 635  */
 636 #define CONFIG_OF_LIBFDT
 637 #define CONFIG_OF_BOARD_SETUP
 638 #define CONFIG_OF_STDOUT_VIA_ALIAS
 639
 640 /* new uImage format support */
 641 #define CONFIG_FIT
 642 #define CONFIG_FIT_VERBOSE      /* enable fit_format_{error,warning}() */
 643
 644 /* I2C */
 645 #define CONFIG_SYS_I2C
 646 #define CONFIG_SYS_I2C_FSL
 647 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 648 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 649 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 650 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 651 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 652 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 653 #define CONFIG_SYS_I2C_NOPROBES         { {0, 0x29} }
 654 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x52
 655 #define CONFIG_SYS_SPD_BUS_NUM          1 /* For rom_loc and flash bank */
 656
 657 /*
 658  * I2C2 EEPROM
 659  */
 660 #undef CONFIG_ID_EEPROM
 661
 662 #define CONFIG_RTC_PT7C4338
 663 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 664 #define CONFIG_SYS_I2C_PCA9557_ADDR     0x18
 665
 666 /* enable read and write access to EEPROM */
 667 #define CONFIG_CMD_EEPROM
 668 #define CONFIG_SYS_I2C_MULTI_EEPROMS
 669 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 670 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 671 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 672
 673 /*
 674  * eSPI - Enhanced SPI
 675  */
 676 #define CONFIG_HARD_SPI
 677 #define CONFIG_FSL_ESPI
 678
 679 #if defined(CONFIG_SPI_FLASH)
 680 #define CONFIG_SPI_FLASH_SPANSION
 681 #define CONFIG_CMD_SF
 682 #define CONFIG_SF_DEFAULT_SPEED 10000000
 683 #define CONFIG_SF_DEFAULT_MODE  0
 684 #endif
 685
 686 #if defined(CONFIG_PCI)
 687 /*
 688  * General PCI
 689  * Memory space is mapped 1-1, but I/O space must start from 0.
 690  */
 691
 692 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
 693 #define CONFIG_SYS_PCIE2_NAME           "PCIe SLOT"
 694 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 695 #ifdef CONFIG_PHYS_64BIT
 696 #define CONFIG_SYS_PCIE2_MEM_BUS        0xc0000000
 697 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 698 #else
 699 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 700 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 701 #endif
 702 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 703 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 704 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 705 #ifdef CONFIG_PHYS_64BIT
 706 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 707 #else
 708 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 709 #endif
 710 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 711
 712 /* controller 1, Slot 2, tgtid 1, Base address a000 */
 713 #define CONFIG_SYS_PCIE1_NAME           "mini PCIe SLOT"
 714 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 715 #ifdef CONFIG_PHYS_64BIT
 716 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 717 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 718 #else
 719 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 720 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 721 #endif
 722 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 723 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
 724 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 725 #ifdef CONFIG_PHYS_64BIT
 726 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc00000ull
 727 #else
 728 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc00000
 729 #endif
 730 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 731
 732 #define CONFIG_PCI_PNP  /* do pci plug-and-play */
 733 #define CONFIG_E1000    /* Defind e1000 pci Ethernet card*/
 734 #define CONFIG_CMD_PCI
 735 #define CONFIG_CMD_NET
 736
 737 #define CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 738 #define CONFIG_DOS_PARTITION
 739 #endif /* CONFIG_PCI */
 740
 741 #if defined(CONFIG_TSEC_ENET)
 742 #define CONFIG_MII              /* MII PHY management */
 743 #define CONFIG_TSEC1
 744 #define CONFIG_TSEC1_NAME       "eTSEC1"
 745 #define CONFIG_TSEC2
 746 #define CONFIG_TSEC2_NAME       "eTSEC2"
 747 #define CONFIG_TSEC3
 748 #define CONFIG_TSEC3_NAME       "eTSEC3"
 749
 750 #define TSEC1_PHY_ADDR  2
 751 #define TSEC2_PHY_ADDR  0
 752 #define TSEC3_PHY_ADDR  1
 753
 754 #define TSEC1_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 755 #define TSEC2_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 756 #define TSEC3_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 757
 758 #define TSEC1_PHYIDX    0
 759 #define TSEC2_PHYIDX    0
 760 #define TSEC3_PHYIDX    0
 761
 762 #define CONFIG_ETHPRIME "eTSEC1"
 763
 764 #define CONFIG_PHY_GIGE 1       /* Include GbE speed/duplex detection */
 765
 766 #define CONFIG_HAS_ETH0
 767 #define CONFIG_HAS_ETH1
 768 #define CONFIG_HAS_ETH2
 769 #endif /* CONFIG_TSEC_ENET */
 770
 771 #ifdef CONFIG_QE
 772 /* QE microcode/firmware address */
 773 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 774 #define CONFIG_SYS_QE_FW_ADDR   0xefec0000
 775 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 776 #endif /* CONFIG_QE */
 777
 778 #ifdef CONFIG_P1025RDB
 779 /*
 780  * QE UEC ethernet configuration
 781  */
 782 #define CONFIG_MIIM_ADDRESS     (CONFIG_SYS_CCSRBAR + 0x82120)
 783
 784 #undef CONFIG_UEC_ETH
 785 #define CONFIG_PHY_MODE_NEED_CHANGE
 786
 787 #define CONFIG_UEC_ETH1 /* ETH1 */
 788 #define CONFIG_HAS_ETH0
 789
 790 #ifdef CONFIG_UEC_ETH1
 791 #define CONFIG_SYS_UEC1_UCC_NUM 0       /* UCC1 */
 792 #define CONFIG_SYS_UEC1_RX_CLK  QE_CLK12 /* CLK12 for MII */
 793 #define CONFIG_SYS_UEC1_TX_CLK  QE_CLK9 /* CLK9 for MII */
 794 #define CONFIG_SYS_UEC1_ETH_TYPE        FAST_ETH
 795 #define CONFIG_SYS_UEC1_PHY_ADDR        0x0     /* 0x0 for MII */
 796 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 797 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
 798 #endif /* CONFIG_UEC_ETH1 */
 799
 800 #define CONFIG_UEC_ETH5 /* ETH5 */
 801 #define CONFIG_HAS_ETH1
 802
 803 #ifdef CONFIG_UEC_ETH5
 804 #define CONFIG_SYS_UEC5_UCC_NUM 4       /* UCC5 */
 805 #define CONFIG_SYS_UEC5_RX_CLK  QE_CLK_NONE
 806 #define CONFIG_SYS_UEC5_TX_CLK  QE_CLK13 /* CLK 13 for RMII */
 807 #define CONFIG_SYS_UEC5_ETH_TYPE        FAST_ETH
 808 #define CONFIG_SYS_UEC5_PHY_ADDR        0x3     /* 0x3 for RMII */
 809 #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 810 #define CONFIG_SYS_UEC5_INTERFACE_SPEED 100
 811 #endif /* CONFIG_UEC_ETH5 */
 812 #endif /* CONFIG_P1025RDB */
 813
 814 /*
 815  * Environment
 816  */
 817 #ifdef CONFIG_SPIFLASH
 818 #define CONFIG_ENV_IS_IN_SPI_FLASH
 819 #define CONFIG_ENV_SPI_BUS      0
 820 #define CONFIG_ENV_SPI_CS       0
 821 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 822 #define CONFIG_ENV_SPI_MODE     0
 823 #define CONFIG_ENV_SIZE         0x2000  /* 8KB */
 824 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 825 #define CONFIG_ENV_SECT_SIZE    0x10000
 826 #elif defined(CONFIG_SDCARD)
 827 #define CONFIG_ENV_IS_IN_MMC
 828 #define CONFIG_FSL_FIXED_MMC_LOCATION
 829 #define CONFIG_ENV_SIZE         0x2000
 830 #define CONFIG_SYS_MMC_ENV_DEV  0
 831 #elif defined(CONFIG_NAND)
 832 #ifdef CONFIG_TPL_BUILD
 833 #define CONFIG_ENV_SIZE         0x2000
 834 #define CONFIG_ENV_ADDR         (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 835 #else
 836 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 837 #endif
 838 #define CONFIG_ENV_IS_IN_NAND
 839 #define CONFIG_ENV_OFFSET       (1024 * 1024)
 840 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE)
 841 #elif defined(CONFIG_SYS_RAMBOOT)
 842 #define CONFIG_ENV_IS_NOWHERE   /* Store ENV in memory only */
 843 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 844 #define CONFIG_ENV_SIZE         0x2000
 845 #else
 846 #define CONFIG_ENV_IS_IN_FLASH
 847 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 848 #define CONFIG_ENV_SIZE         0x2000
 849 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 850 #endif
 851
 852 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 853 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 854
 855 /*
 856  * Command line configuration.
 857  */
 858 #include <config_cmd_default.h>
 859
 860 #define CONFIG_CMD_IRQ
 861 #define CONFIG_CMD_PING
 862 #define CONFIG_CMD_I2C
 863 #define CONFIG_CMD_MII
 864 #define CONFIG_CMD_DATE
 865 #define CONFIG_CMD_ELF
 866 #define CONFIG_CMD_SETEXPR
 867 #define CONFIG_CMD_REGINFO
 868
 869 /*
 870  * USB
 871  */
 872 #define CONFIG_HAS_FSL_DR_USB
 873
 874 #if defined(CONFIG_HAS_FSL_DR_USB)
 875 #define CONFIG_USB_EHCI
 876
 877 #ifdef CONFIG_USB_EHCI
 878 #define CONFIG_CMD_USB
 879 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 880 #define CONFIG_USB_EHCI_FSL
 881 #define CONFIG_USB_STORAGE
 882 #endif
 883 #endif
 884
 885 #if defined(CONFIG_P1020RDB_PD)
 886 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
 887 #endif
 888
 889 #define CONFIG_MMC
 890
 891 #ifdef CONFIG_MMC
 892 #define CONFIG_FSL_ESDHC
 893 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 894 #define CONFIG_CMD_MMC
 895 #define CONFIG_GENERIC_MMC
 896 #endif
 897
 898 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \
 899                  || defined(CONFIG_FSL_SATA)
 900 #define CONFIG_CMD_EXT2
 901 #define CONFIG_CMD_FAT
 902 #define CONFIG_DOS_PARTITION
 903 #endif
 904
 905 #undef CONFIG_WATCHDOG  /* watchdog disabled */
 906
 907 /*
 908  * Miscellaneous configurable options
 909  */
 910 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 911 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 912 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 913 #if defined(CONFIG_CMD_KGDB)
 914 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 915 #else
 916 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 917 #endif
 918 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 919         /* Print Buffer Size */
 920 #define CONFIG_SYS_MAXARGS      16      /* max number of command args */
 921 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 922
 923 /*
 924  * For booting Linux, the board info and command line data
 925  * have to be in the first 64 MB of memory, since this is
 926  * the maximum mapped by the Linux kernel during initialization.
 927  */
 928 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory for Linux*/
 929 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 930
 931 #if defined(CONFIG_CMD_KGDB)
 932 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 933 #endif
 934
 935 /*
 936  * Environment Configuration
 937  */
 938 #define CONFIG_HOSTNAME         unknown
 939 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 940 #define CONFIG_BOOTFILE         "uImage"
 941 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 942
 943 /* default location for tftp and bootm */
 944 #define CONFIG_LOADADDR 1000000
 945
 946 #define CONFIG_BOOTDELAY 10     /* -1 disables auto-boot */
 947 #define CONFIG_BOOTARGS /* the boot command will set bootargs */
 948
 949 #define CONFIG_BAUDRATE 115200
 950
 951 #ifdef __SW_BOOT_NOR
 952 #define __NOR_RST_CMD   \
 953 norboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NOR 1; \
 954 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 955 #endif
 956 #ifdef __SW_BOOT_SPI
 957 #define __SPI_RST_CMD   \
 958 spiboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SPI 1; \
 959 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 960 #endif
 961 #ifdef __SW_BOOT_SD
 962 #define __SD_RST_CMD    \
 963 sdboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_SD 1; \
 964 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 965 #endif
 966 #ifdef __SW_BOOT_NAND
 967 #define __NAND_RST_CMD  \
 968 nandboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_NAND 1; \
 969 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 970 #endif
 971 #ifdef __SW_BOOT_PCIE
 972 #define __PCIE_RST_CMD  \
 973 pciboot=i2c dev 1; i2c mw 18 1 __SW_BOOT_PCIE 1; \
 974 i2c mw 18 3 __SW_BOOT_MASK 1; reset
 975 #endif
 976
 977 #define CONFIG_EXTRA_ENV_SETTINGS       \
 978 "netdev=eth0\0" \
 979 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"     \
 980 "loadaddr=1000000\0"    \
 981 "bootfile=uImage\0"     \
 982 "tftpflash=tftpboot $loadaddr $uboot; " \
 983         "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
 984         "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; "      \
 985         "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \
 986         "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
 987         "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
 988 "hwconfig=usb1:dr_mode=host,phy_type=ulpi\0"    \
 989 "consoledev=ttyS0\0"    \
 990 "ramdiskaddr=2000000\0" \
 991 "ramdiskfile=rootfs.ext2.gz.uboot\0"    \
 992 "fdtaddr=c00000\0"      \
 993 "bdev=sda1\0" \
 994 "jffs2nor=mtdblock3\0"  \
 995 "norbootaddr=ef080000\0"        \
 996 "norfdtaddr=ef040000\0" \
 997 "jffs2nand=mtdblock9\0" \
 998 "nandbootaddr=100000\0" \
 999 "nandfdtaddr=80000\0"           \
1000 "ramdisk_size=120000\0" \
1001 "map_lowernorbank=i2c dev 1; i2c mw 18 1 02 1; i2c mw 18 3 fd 1\0" \
1002 "map_uppernorbank=i2c dev 1; i2c mw 18 1 00 1; i2c mw 18 3 fd 1\0" \
1003 __stringify(__NOR_RST_CMD)"\0" \
1004 __stringify(__SPI_RST_CMD)"\0" \
1005 __stringify(__SD_RST_CMD)"\0" \
1006 __stringify(__NAND_RST_CMD)"\0" \
1007 __stringify(__PCIE_RST_CMD)"\0"
1008
1009 #define CONFIG_NFSBOOTCOMMAND   \
1010 "setenv bootargs root=/dev/nfs rw "     \
1011 "nfsroot=$serverip:$rootpath "  \
1012 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
1013 "console=$consoledev,$baudrate $othbootargs;" \
1014 "tftp $loadaddr $bootfile;"     \
1015 "tftp $fdtaddr $fdtfile;"       \
1016 "bootm $loadaddr - $fdtaddr"
1017
1018 #define CONFIG_HDBOOT   \
1019 "setenv bootargs root=/dev/$bdev rw rootdelay=30 "      \
1020 "console=$consoledev,$baudrate $othbootargs;" \
1021 "usb start;"    \
1022 "ext2load usb 0:1 $loadaddr /boot/$bootfile;"   \
1023 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"     \
1024 "bootm $loadaddr - $fdtaddr"
1025
1026 #define CONFIG_USB_FAT_BOOT     \
1027 "setenv bootargs root=/dev/ram rw "     \
1028 "console=$consoledev,$baudrate $othbootargs " \
1029 "ramdisk_size=$ramdisk_size;"   \
1030 "usb start;"    \
1031 "fatload usb 0:2 $loadaddr $bootfile;"  \
1032 "fatload usb 0:2 $fdtaddr $fdtfile;"    \
1033 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"    \
1034 "bootm $loadaddr $ramdiskaddr $fdtaddr"
1035
1036 #define CONFIG_USB_EXT2_BOOT    \
1037 "setenv bootargs root=/dev/ram rw "     \
1038 "console=$consoledev,$baudrate $othbootargs " \
1039 "ramdisk_size=$ramdisk_size;"   \
1040 "usb start;"    \
1041 "ext2load usb 0:4 $loadaddr $bootfile;" \
1042 "ext2load usb 0:4 $fdtaddr $fdtfile;" \
1043 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
1044 "bootm $loadaddr $ramdiskaddr $fdtaddr"
1045
1046 #define CONFIG_NORBOOT  \
1047 "setenv bootargs root=/dev/$jffs2nor rw "       \
1048 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;"  \
1049 "bootm $norbootaddr - $norfdtaddr"
1050
1051 #define CONFIG_RAMBOOTCOMMAND   \
1052 "setenv bootargs root=/dev/ram rw "     \
1053 "console=$consoledev,$baudrate $othbootargs " \
1054 "ramdisk_size=$ramdisk_size;"   \
1055 "tftp $ramdiskaddr $ramdiskfile;"       \
1056 "tftp $loadaddr $bootfile;"     \
1057 "tftp $fdtaddr $fdtfile;"       \
1058 "bootm $loadaddr $ramdiskaddr $fdtaddr"
1059
1060 #define CONFIG_BOOTCOMMAND      CONFIG_HDBOOT
1061
1062 #endif /* __CONFIG_H */