include/configs/p1_twr.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 /*
   8  * QorIQ P1 Tower boards configuration file
   9  */
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 #if defined(CONFIG_TWR_P1025)
  14 #define CONFIG_BOARDNAME "TWR-P1025"
  15 #define CONFIG_PHY_ATHEROS
  16 #define CONFIG_QE
  17 #define CONFIG_SYS_LBC_LBCR     0x00080000      /* Conversion of LBC addr */
  18 #define CONFIG_SYS_LBC_LCRR     0x80000002      /* LB clock ratio reg */
  19 #endif
  20
  21 #ifdef CONFIG_SDCARD
  22 #define CONFIG_RAMBOOT_SDCARD
  23 #define CONFIG_SYS_RAMBOOT
  24 #define CONFIG_SYS_EXTRA_ENV_RELOC
  25 #define CONFIG_SYS_TEXT_BASE            0x11000000
  26 #define CONFIG_RESET_VECTOR_ADDRESS     0x110bfffc
  27 #endif
  28
  29 #ifndef CONFIG_SYS_TEXT_BASE
  30 #define CONFIG_SYS_TEXT_BASE            0xeff40000
  31 #endif
  32
  33 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  34 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  35 #endif
  36
  37 #ifndef CONFIG_SYS_MONITOR_BASE
  38 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
  39 #endif
  40
  41 #define CONFIG_MP
  42
  43 #define CONFIG_PCIE1    /* PCIE controller 1 (slot 1) */
  44 #define CONFIG_PCIE2    /* PCIE controller 2 (slot 2) */
  45 #define CONFIG_FSL_PCI_INIT     /* Use common FSL init code */
  46 #define CONFIG_PCI_INDIRECT_BRIDGE      /* indirect PCI bridge support */
  47 #define CONFIG_FSL_PCIE_RESET   /* need PCIe reset errata */
  48 #define CONFIG_SYS_PCI_64BIT    /* enable 64-bit PCI resources */
  49
  50 #define CONFIG_TSEC_ENET        /* tsec ethernet support */
  51 #define CONFIG_ENV_OVERWRITE
  52
  53 #define CONFIG_SYS_SATA_MAX_DEVICE      2
  54 #define CONFIG_LBA48
  55
  56 #ifndef __ASSEMBLY__
  57 extern unsigned long get_board_sys_clk(unsigned long dummy);
  58 #endif
  59 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0) /*sysclk for TWR-P1025 */
  60
  61 #define CONFIG_DDR_CLK_FREQ     66666666
  62
  63 #define CONFIG_HWCONFIG
  64 /*
  65  * These can be toggled for performance analysis, otherwise use default.
  66  */
  67 #define CONFIG_L2_CACHE
  68 #define CONFIG_BTB
  69
  70 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
  71 #define CONFIG_SYS_MEMTEST_END          0x1fffffff
  72 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
  73
  74 #define CONFIG_SYS_CCSRBAR              0xffe00000
  75 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
  76
  77 /* DDR Setup */
  78
  79 #define CONFIG_SYS_SDRAM_SIZE_LAW       LAW_SIZE_512M
  80 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  81
  82 #define CONFIG_SYS_SDRAM_SIZE           (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19))
  83 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
  84 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  85
  86 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  87
  88 /* Default settings for DDR3 */
  89 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000001f
  90 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014202
  91 #define CONFIG_SYS_DDR_CS0_CONFIG_2     0x00000000
  92 #define CONFIG_SYS_DDR_CS1_BNDS         0x00000000
  93 #define CONFIG_SYS_DDR_CS1_CONFIG       0x00000000
  94 #define CONFIG_SYS_DDR_CS1_CONFIG_2     0x00000000
  95
  96 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
  97 #define CONFIG_SYS_DDR_INIT_ADDR        0x00000000
  98 #define CONFIG_SYS_DDR_INIT_EXT_ADDR    0x00000000
  99 #define CONFIG_SYS_DDR_MODE_CONTROL     0x00000000
 100
 101 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 102 #define CONFIG_SYS_DDR_WRLVL_CONTROL    0x8655a608
 103 #define CONFIG_SYS_DDR_SR_CNTR          0x00000000
 104 #define CONFIG_SYS_DDR_RCW_1            0x00000000
 105 #define CONFIG_SYS_DDR_RCW_2            0x00000000
 106 #define CONFIG_SYS_DDR_CONTROL          0xc70c0000      /* Type = DDR3  */
 107 #define CONFIG_SYS_DDR_CONTROL_2        0x04401050
 108 #define CONFIG_SYS_DDR_TIMING_4         0x00220001
 109 #define CONFIG_SYS_DDR_TIMING_5         0x03402400
 110
 111 #define CONFIG_SYS_DDR_TIMING_3         0x00020000
 112 #define CONFIG_SYS_DDR_TIMING_0         0x00220004
 113 #define CONFIG_SYS_DDR_TIMING_1         0x5c5b6544
 114 #define CONFIG_SYS_DDR_TIMING_2         0x0fa880de
 115 #define CONFIG_SYS_DDR_CLK_CTRL         0x03000000
 116 #define CONFIG_SYS_DDR_MODE_1           0x80461320
 117 #define CONFIG_SYS_DDR_MODE_2           0x00008000
 118 #define CONFIG_SYS_DDR_INTERVAL         0x09480000
 119
 120 /*
 121  * Memory map
 122  *
 123  * 0x0000_0000 0x1fff_ffff      DDR             Up to 512MB cacheable
 124  * 0x8000_0000 0xdfff_ffff      PCI Express Mem 1.5G non-cacheable(PCIe * 3)
 125  * 0xffc0_0000 0xffc3_ffff      PCI IO range    256k non-cacheable
 126  *
 127  * Localbus
 128  * 0xe000_0000 0xe002_0000      SSD1289         128K non-cacheable
 129  * 0xec00_0000 0xefff_ffff      FLASH           Up to 64M non-cacheable
 130  *
 131  * 0xff90_0000 0xff97_ffff      L2 SRAM         Up to 512K cacheable
 132  * 0xffd0_0000 0xffd0_3fff      init ram        16K Cacheable
 133  * 0xffe0_0000 0xffef_ffff      CCSR            1M non-cacheable
 134  */
 135
 136 /*
 137  * Local Bus Definitions
 138  */
 139 #define CONFIG_SYS_MAX_FLASH_SECT       512     /* 64M */
 140 #define CONFIG_SYS_FLASH_BASE           0xec000000
 141
 142 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 143
 144 #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS)) \
 145         | BR_PS_16 | BR_V)
 146
 147 #define CONFIG_FLASH_OR_PRELIM  0xfc0000b1
 148
 149 #define CONFIG_SYS_SSD_BASE     0xe0000000
 150 #define CONFIG_SYS_SSD_BASE_PHYS        CONFIG_SYS_SSD_BASE
 151 #define CONFIG_SSD_BR_PRELIM    (BR_PHYS_ADDR(CONFIG_SYS_SSD_BASE_PHYS) | \
 152                                         BR_PS_16 | BR_V)
 153 #define CONFIG_SSD_OR_PRELIM    (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \
 154                                  OR_GPCM_ACS_DIV2 | OR_GPCM_SCY | \
 155                                  OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD)
 156
 157 #define CONFIG_SYS_BR2_PRELIM CONFIG_SSD_BR_PRELIM
 158 #define CONFIG_SYS_OR2_PRELIM CONFIG_SSD_OR_PRELIM
 159
 160 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 161 #define CONFIG_SYS_FLASH_QUIET_TEST
 162 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 163
 164 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 165
 166 #undef CONFIG_SYS_FLASH_CHECKSUM
 167 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 168 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 169
 170 #define CONFIG_FLASH_CFI_DRIVER
 171 #define CONFIG_SYS_FLASH_CFI
 172 #define CONFIG_SYS_FLASH_EMPTY_INFO
 173 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 174
 175 #define CONFIG_BOARD_EARLY_INIT_R       /* call board_early_init_r function */
 176
 177 #define CONFIG_SYS_INIT_RAM_LOCK
 178 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000
 179 /* Initial L1 address */
 180 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS   CONFIG_SYS_INIT_RAM_ADDR
 181 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
 182 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
 183 /* Size of used area in RAM */
 184 #define CONFIG_SYS_INIT_RAM_SIZE        0x00004000
 185
 186 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 187                                         GENERATED_GBL_DATA_SIZE)
 188 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 189
 190 #define CONFIG_SYS_MONITOR_LEN  (768 * 1024)
 191 #define CONFIG_SYS_MALLOC_LEN   (1024 * 1024)/* Reserved for malloc */
 192
 193 #define CONFIG_SYS_BR0_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 194 #define CONFIG_SYS_OR0_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 195
 196 /* Serial Port
 197  * open - index 2
 198  * shorted - index 1
 199  */
 200 #define CONFIG_CONS_INDEX               1
 201 #undef CONFIG_SERIAL_SOFTWARE_FIFO
 202 #define CONFIG_SYS_NS16550_SERIAL
 203 #define CONFIG_SYS_NS16550_REG_SIZE     1
 204 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 205
 206 #define CONFIG_SYS_BAUDRATE_TABLE       \
 207         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 208
 209 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 210 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 211
 212 /* I2C */
 213 #define CONFIG_SYS_I2C
 214 #define CONFIG_SYS_I2C_FSL                      /* Use FSL common I2C driver */
 215 #define CONFIG_SYS_FSL_I2C_SPEED        400000  /* I2C spd and slave address */
 216 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 217 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 218 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x52
 219
 220 /*
 221  * I2C2 EEPROM
 222  */
 223 #define CONFIG_SYS_FSL_I2C2_SPEED       400000  /* I2C spd and slave address */
 224 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 225 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 226
 227 #define CONFIG_SYS_I2C_PCA9555_ADDR     0x23
 228
 229 /* enable read and write access to EEPROM */
 230 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
 231 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 232 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 233
 234 /*
 235  * eSPI - Enhanced SPI
 236  */
 237 #define CONFIG_HARD_SPI
 238
 239 #if defined(CONFIG_PCI)
 240 /*
 241  * General PCI
 242  * Memory space is mapped 1-1, but I/O space must start from 0.
 243  */
 244
 245 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
 246 #define CONFIG_SYS_PCIE2_NAME           "TWR-ELEV PCIe SLOT"
 247 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 248 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 249 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 250 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 251 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 252 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 253 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 254 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 255
 256 /* controller 1, tgtid 1, Base address a000 */
 257 #define CONFIG_SYS_PCIE1_NAME           "mini PCIe SLOT"
 258 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 259 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 260 #define CONFIG_SYS_PCIE1_MEM_PHYS       0x80000000
 261 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 262 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc00000
 263 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 264 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc00000
 265 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 266
 267 #define CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 268 #endif /* CONFIG_PCI */
 269
 270 #if defined(CONFIG_TSEC_ENET)
 271
 272 #define CONFIG_MII              /* MII PHY management */
 273 #define CONFIG_TSEC1
 274 #define CONFIG_TSEC1_NAME       "eTSEC1"
 275 #undef CONFIG_TSEC2
 276 #undef CONFIG_TSEC2_NAME
 277 #define CONFIG_TSEC3
 278 #define CONFIG_TSEC3_NAME       "eTSEC3"
 279
 280 #define TSEC1_PHY_ADDR  2
 281 #define TSEC2_PHY_ADDR  0
 282 #define TSEC3_PHY_ADDR  1
 283
 284 #define TSEC1_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 285 #define TSEC2_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 286 #define TSEC3_FLAGS     (TSEC_GIGABIT | TSEC_REDUCED)
 287
 288 #define TSEC1_PHYIDX    0
 289 #define TSEC2_PHYIDX    0
 290 #define TSEC3_PHYIDX    0
 291
 292 #define CONFIG_ETHPRIME "eTSEC1"
 293
 294 #define CONFIG_HAS_ETH0
 295 #define CONFIG_HAS_ETH1
 296 #undef CONFIG_HAS_ETH2
 297 #endif /* CONFIG_TSEC_ENET */
 298
 299 #ifdef CONFIG_QE
 300 /* QE microcode/firmware address */
 301 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 302 #define CONFIG_SYS_QE_FW_ADDR   0xefec0000
 303 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 304 #endif /* CONFIG_QE */
 305
 306 #ifdef CONFIG_TWR_P1025
 307 /*
 308  * QE UEC ethernet configuration
 309  */
 310 #define CONFIG_MIIM_ADDRESS     (CONFIG_SYS_CCSRBAR + 0x82120)
 311
 312 #undef CONFIG_UEC_ETH
 313 #define CONFIG_PHY_MODE_NEED_CHANGE
 314
 315 #define CONFIG_UEC_ETH1 /* ETH1 */
 316 #define CONFIG_HAS_ETH0
 317
 318 #ifdef CONFIG_UEC_ETH1
 319 #define CONFIG_SYS_UEC1_UCC_NUM 0       /* UCC1 */
 320 #define CONFIG_SYS_UEC1_RX_CLK  QE_CLK12 /* CLK12 for MII */
 321 #define CONFIG_SYS_UEC1_TX_CLK  QE_CLK9 /* CLK9 for MII */
 322 #define CONFIG_SYS_UEC1_ETH_TYPE        FAST_ETH
 323 #define CONFIG_SYS_UEC1_PHY_ADDR        0x18    /* 0x18 for MII */
 324 #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII
 325 #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100
 326 #endif /* CONFIG_UEC_ETH1 */
 327
 328 #define CONFIG_UEC_ETH5 /* ETH5 */
 329 #define CONFIG_HAS_ETH1
 330
 331 #ifdef CONFIG_UEC_ETH5
 332 #define CONFIG_SYS_UEC5_UCC_NUM 4       /* UCC5 */
 333 #define CONFIG_SYS_UEC5_RX_CLK  QE_CLK_NONE
 334 #define CONFIG_SYS_UEC5_TX_CLK  QE_CLK13 /* CLK 13 for RMII */
 335 #define CONFIG_SYS_UEC5_ETH_TYPE        FAST_ETH
 336 #define CONFIG_SYS_UEC5_PHY_ADDR        0x19    /* 0x19 for RMII */
 337 #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII
 338 #define CONFIG_SYS_UEC5_INTERFACE_SPEED 100
 339 #endif /* CONFIG_UEC_ETH5 */
 340 #endif /* CONFIG_TWR-P1025 */
 341
 342 /*
 343  * Dynamic MTD Partition support with mtdparts
 344  */
 345 #define CONFIG_MTD_DEVICE
 346 #define CONFIG_MTD_PARTITIONS
 347 #define CONFIG_FLASH_CFI_MTD
 348
 349 /*
 350  * Environment
 351  */
 352 #ifdef CONFIG_SYS_RAMBOOT
 353 #ifdef CONFIG_RAMBOOT_SDCARD
 354 #define CONFIG_ENV_SIZE         0x2000
 355 #define CONFIG_SYS_MMC_ENV_DEV  0
 356 #else
 357 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 358 #define CONFIG_ENV_SIZE         0x2000
 359 #endif
 360 #else
 361 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 362 #define CONFIG_ENV_SIZE         0x2000
 363 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 364 #endif
 365
 366 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 367 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 368
 369 /*
 370  * USB
 371  */
 372 #define CONFIG_HAS_FSL_DR_USB
 373
 374 #if defined(CONFIG_HAS_FSL_DR_USB)
 375 #ifdef CONFIG_USB_EHCI_HCD
 376 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 377 #define CONFIG_USB_EHCI_FSL
 378 #endif
 379 #endif
 380
 381 #ifdef CONFIG_MMC
 382 #define CONFIG_FSL_ESDHC
 383 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 384 #endif
 385
 386 #undef CONFIG_WATCHDOG  /* watchdog disabled */
 387
 388 /*
 389  * Miscellaneous configurable options
 390  */
 391 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 392 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 393 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 394
 395 /*
 396  * For booting Linux, the board info and command line data
 397  * have to be in the first 64 MB of memory, since this is
 398  * the maximum mapped by the Linux kernel during initialization.
 399  */
 400 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory for Linux*/
 401 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 402
 403 /*
 404  * Environment Configuration
 405  */
 406 #define CONFIG_HOSTNAME         unknown
 407 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 408 #define CONFIG_BOOTFILE         "uImage"
 409 #define CONFIG_UBOOTPATH        u-boot.bin /* U-Boot image on TFTP server */
 410
 411 /* default location for tftp and bootm */
 412 #define CONFIG_LOADADDR 1000000
 413
 414 #define CONFIG_EXTRA_ENV_SETTINGS       \
 415 "netdev=eth0\0" \
 416 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"     \
 417 "loadaddr=1000000\0"    \
 418 "bootfile=uImage\0"     \
 419 "dtbfile=twr-p1025twr.dtb\0"    \
 420 "ramdiskfile=rootfs.ext2.gz.uboot\0"    \
 421 "qefirmwarefile=fsl_qe_ucode_1021_10_A.bin\0"   \
 422 "tftpflash=tftpboot $loadaddr $uboot; " \
 423         "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
 424         "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; "      \
 425         "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \
 426         "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
 427         "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
 428 "kernelflash=tftpboot $loadaddr $bootfile; "    \
 429         "protect off 0xefa80000 +$filesize; "   \
 430         "erase 0xefa80000 +$filesize; " \
 431         "cp.b $loadaddr 0xefa80000 $filesize; " \
 432         "protect on 0xefa80000 +$filesize; "    \
 433         "cmp.b $loadaddr 0xefa80000 $filesize\0"        \
 434 "dtbflash=tftpboot $loadaddr $dtbfile; "        \
 435         "protect off 0xefe80000 +$filesize; "   \
 436         "erase 0xefe80000 +$filesize; " \
 437         "cp.b $loadaddr 0xefe80000 $filesize; " \
 438         "protect on 0xefe80000 +$filesize; "    \
 439         "cmp.b $loadaddr 0xefe80000 $filesize\0"        \
 440 "ramdiskflash=tftpboot $loadaddr $ramdiskfile; "        \
 441         "protect off 0xeeb80000 +$filesize; "   \
 442         "erase 0xeeb80000 +$filesize; " \
 443         "cp.b $loadaddr 0xeeb80000 $filesize; " \
 444         "protect on 0xeeb80000 +$filesize; "    \
 445         "cmp.b $loadaddr 0xeeb80000 $filesize\0"        \
 446 "qefirmwareflash=tftpboot $loadaddr $qefirmwarefile; "  \
 447         "protect off 0xefec0000 +$filesize; "   \
 448         "erase 0xefec0000 +$filesize; " \
 449         "cp.b $loadaddr 0xefec0000 $filesize; " \
 450         "protect on 0xefec0000 +$filesize; "    \
 451         "cmp.b $loadaddr 0xefec0000 $filesize\0"        \
 452 "consoledev=ttyS0\0"    \
 453 "ramdiskaddr=2000000\0" \
 454 "ramdiskfile=rootfs.ext2.gz.uboot\0"    \
 455 "fdtaddr=1e00000\0"     \
 456 "bdev=sda1\0"   \
 457 "norbootaddr=ef080000\0"        \
 458 "norfdtaddr=ef040000\0" \
 459 "ramdisk_size=120000\0" \
 460 "usbboot=setenv bootargs root=/dev/sda1 rw rootdelay=5 " \
 461 "console=$consoledev,$baudrate $othbootargs ; bootm 0xefa80000 - 0xefe80000"
 462
 463 #define CONFIG_NFSBOOTCOMMAND   \
 464 "setenv bootargs root=/dev/nfs rw "     \
 465 "nfsroot=$serverip:$rootpath "  \
 466 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 467 "console=$consoledev,$baudrate $othbootargs;" \
 468 "tftp $loadaddr $bootfile&&"    \
 469 "tftp $fdtaddr $fdtfile&&"      \
 470 "bootm $loadaddr - $fdtaddr"
 471
 472 #define CONFIG_HDBOOT   \
 473 "setenv bootargs root=/dev/$bdev rw rootdelay=30 "      \
 474 "console=$consoledev,$baudrate $othbootargs;" \
 475 "usb start;"    \
 476 "ext2load usb 0:1 $loadaddr /boot/$bootfile;"   \
 477 "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;"     \
 478 "bootm $loadaddr - $fdtaddr"
 479
 480 #define CONFIG_USB_FAT_BOOT     \
 481 "setenv bootargs root=/dev/ram rw "     \
 482 "console=$consoledev,$baudrate $othbootargs " \
 483 "ramdisk_size=$ramdisk_size;"   \
 484 "usb start;"    \
 485 "fatload usb 0:2 $loadaddr $bootfile;"  \
 486 "fatload usb 0:2 $fdtaddr $fdtfile;"    \
 487 "fatload usb 0:2 $ramdiskaddr $ramdiskfile;"    \
 488 "bootm $loadaddr $ramdiskaddr $fdtaddr"
 489
 490 #define CONFIG_USB_EXT2_BOOT    \
 491 "setenv bootargs root=/dev/ram rw "     \
 492 "console=$consoledev,$baudrate $othbootargs " \
 493 "ramdisk_size=$ramdisk_size;"   \
 494 "usb start;"    \
 495 "ext2load usb 0:4 $loadaddr $bootfile;" \
 496 "ext2load usb 0:4 $fdtaddr $fdtfile;" \
 497 "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \
 498 "bootm $loadaddr $ramdiskaddr $fdtaddr"
 499
 500 #define CONFIG_NORBOOT  \
 501 "setenv bootargs root=/dev/mtdblock3 rw "       \
 502 "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;"  \
 503 "bootm $norbootaddr - $norfdtaddr"
 504
 505 #define CONFIG_RAMBOOTCOMMAND_TFTP      \
 506 "setenv bootargs root=/dev/ram rw "     \
 507 "console=$consoledev,$baudrate $othbootargs " \
 508 "ramdisk_size=$ramdisk_size;"   \
 509 "tftp $ramdiskaddr $ramdiskfile;"       \
 510 "tftp $loadaddr $bootfile;"     \
 511 "tftp $fdtaddr $fdtfile;"       \
 512 "bootm $loadaddr $ramdiskaddr $fdtaddr"
 513
 514 #define CONFIG_RAMBOOTCOMMAND   \
 515 "setenv bootargs root=/dev/ram rw "     \
 516 "console=$consoledev,$baudrate $othbootargs " \
 517 "ramdisk_size=$ramdisk_size;"   \
 518 "bootm 0xefa80000 0xeeb80000 0xefe80000"
 519
 520 #define CONFIG_BOOTCOMMAND      CONFIG_RAMBOOTCOMMAND
 521
 522 #endif /* __CONFIG_H */