]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/p2371-2180.h
ARM: tegra: Add p2371-2180 board
[people/ms/u-boot.git] / include / configs / p2371-2180.h
1 /*
2 * (C) Copyright 2013-2015
3 * NVIDIA Corporation <www.nvidia.com>
4 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8 #ifndef _P2371_2180_H
9 #define _P2371_2180_H
10
11 #include <linux/sizes.h>
12
13 #include "tegra210-common.h"
14
15 /* High-level configuration options */
16 #define V_PROMPT "Tegra210 (P2371-2180) # "
17 #define CONFIG_TEGRA_BOARD_STRING "NVIDIA P2371-2180"
18
19 /* Board-specific serial config */
20 #define CONFIG_TEGRA_ENABLE_UARTA
21
22 /* I2C */
23 #define CONFIG_SYS_I2C_TEGRA
24 #define CONFIG_CMD_I2C
25
26 /* SD/MMC */
27 #define CONFIG_MMC
28 #define CONFIG_GENERIC_MMC
29 #define CONFIG_TEGRA_MMC
30 #define CONFIG_CMD_MMC
31
32 /* Environment in eMMC, at the end of 2nd "boot sector" */
33 #define CONFIG_ENV_IS_IN_MMC
34 #define CONFIG_SYS_MMC_ENV_DEV 0
35 #define CONFIG_SYS_MMC_ENV_PART 2
36 #define CONFIG_ENV_OFFSET (-CONFIG_ENV_SIZE)
37
38 /* SPI */
39 #define CONFIG_SPI_FLASH_WINBOND
40 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
41 #define CONFIG_SF_DEFAULT_SPEED 24000000
42 #define CONFIG_CMD_SPI
43 #define CONFIG_CMD_SF
44 #define CONFIG_SPI_FLASH_SIZE (4 << 20)
45
46 /* USB2.0 Host support */
47 #define CONFIG_USB_EHCI
48 #define CONFIG_USB_EHCI_TEGRA
49 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
50 #define CONFIG_USB_STORAGE
51 #define CONFIG_CMD_USB
52
53 /* USB networking support */
54 #define CONFIG_USB_HOST_ETHER
55 #define CONFIG_USB_ETHER_ASIX
56
57 /* General networking support */
58 #define CONFIG_CMD_DHCP
59
60 #include "tegra-common-usb-gadget.h"
61 #include "tegra-common-post.h"
62
63 #define COUNTER_FREQUENCY 38400000
64
65 #endif /* _P2371_2180_H */