include/configs/pb1x00.h

   1 /*
   2  * (C) Copyright 2003
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * This file contains the configuration parameters for the dbau1x00 board.
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #define CONFIG_PB1X00           1
  16 #define CONFIG_SOC_AU1X00       1  /* alchemy series cpu */
  17
  18 #define CONFIG_DISPLAY_BOARDINFO
  19
  20 #ifdef CONFIG_PB1000
  21 #define CONFIG_SOC_AU1000       1
  22 #else
  23 #ifdef CONFIG_PB1100
  24 #define CONFIG_SOC_AU1100       1
  25 #else
  26 #ifdef CONFIG_PB1500
  27 #define CONFIG_SOC_AU1500       1
  28 #else
  29 #error "No valid board set"
  30 #endif
  31 #endif
  32 #endif
  33
  34 #define CONFIG_ETHADDR          DE:AD:BE:EF:01:01    /* Ethernet address */
  35
  36 #define CONFIG_BOOTDELAY        2       /* autoboot after 2 seconds     */
  37
  38 #define CONFIG_BAUDRATE         115200
  39
  40 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  41 #undef  CONFIG_BOOTARGS
  42
  43 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  44         "addmisc=setenv bootargs ${bootargs} "                          \
  45                 "console=ttyS0,${baudrate} "                            \
  46                 "panic=1\0"                                             \
  47         "bootfile=/vmlinux.img\0"                               \
  48         "load=tftp 80500000 ${u-boot}\0"                                \
  49         ""
  50 /* Boot from NFS root */
  51 #define CONFIG_BOOTCOMMAND      "bootp; setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; bootm"
  52
  53 /*
  54  * Miscellaneous configurable options
  55  */
  56 #define CONFIG_SYS_LONGHELP                             /* undef to save memory      */
  57 #define CONFIG_SYS_PROMPT               "Pb1x00 # "     /* Monitor Command Prompt    */
  58 #define CONFIG_SYS_CBSIZE               256             /* Console I/O Buffer Size   */
  59 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
  60 #define CONFIG_SYS_MAXARGS              16              /* max number of command args*/
  61
  62 #define CONFIG_SYS_MALLOC_LEN           128*1024
  63
  64 #define CONFIG_SYS_BOOTPARAMS_LEN       128*1024
  65
  66 #define CONFIG_SYS_MIPS_TIMER_FREQ      396000000
  67
  68 #define CONFIG_SYS_SDRAM_BASE           0x80000000     /* Cached addr */
  69
  70 #define CONFIG_SYS_LOAD_ADDR            0x81000000     /* default load address  */
  71
  72 #define CONFIG_SYS_MEMTEST_START        0x80100000
  73 #undef CONFIG_SYS_MEMTEST_START
  74 #define CONFIG_SYS_MEMTEST_START       0x80200000
  75 #define CONFIG_SYS_MEMTEST_END          0x83800000
  76
  77 /*-----------------------------------------------------------------------
  78  * FLASH and environment organization
  79  */
  80 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* max number of memory banks */
  81 #define CONFIG_SYS_MAX_FLASH_SECT       (128)   /* max number of sectors on one chip */
  82
  83 #define PHYS_FLASH_1            0xbec00000 /* Flash Bank #1 */
  84 #define PHYS_FLASH_2            0xbfc00000 /* Flash Bank #2 */
  85
  86 /* The following #defines are needed to get flash environment right */
  87 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
  88 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)
  89
  90 #define CONFIG_SYS_INIT_SP_OFFSET       0x4000000
  91
  92 /* We boot from this flash, selected with dip switch */
  93 #define CONFIG_SYS_FLASH_BASE           PHYS_FLASH_2
  94
  95 /* timeout values are in ticks */
  96 #define CONFIG_SYS_FLASH_ERASE_TOUT     (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
  97 #define CONFIG_SYS_FLASH_WRITE_TOUT     (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
  98
  99 #define CONFIG_ENV_IS_NOWHERE   1
 100
 101 /* Address and size of Primary Environment Sector       */
 102 #define CONFIG_ENV_ADDR         0xB0030000
 103 #define CONFIG_ENV_SIZE         0x10000
 104
 105 #define CONFIG_FLASH_16BIT
 106
 107 #define CONFIG_NR_DRAM_BANKS    2
 108
 109
 110 #define CONFIG_MEMSIZE_IN_BYTES
 111
 112
 113 /*---USB -------------------------------------------*/
 114 #if 0
 115 #define CONFIG_USB_OHCI
 116 #define CONFIG_USB_STORAGE
 117 #define CONFIG_DOS_PARTITION
 118 #endif
 119
 120 /*---ATA PCMCIA ------------------------------------*/
 121 #if 0
 122 #define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */
 123 #define CONFIG_SYS_PCMCIA_MEM_ADDR 0x20000000
 124 #define CONFIG_PCMCIA_SLOT_A
 125
 126 #define CONFIG_ATAPI 1
 127 #define CONFIG_MAC_PARTITION 1
 128
 129 /* We run CF in "true ide" mode or a harddrive via pcmcia */
 130 #define CONFIG_IDE_PCMCIA 1
 131
 132 /* We only support one slot for now */
 133 #define CONFIG_SYS_IDE_MAXBUS           1       /* max. 1 IDE bus               */
 134 #define CONFIG_SYS_IDE_MAXDEVICE        1       /* max. 1 drive per IDE bus     */
 135
 136 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 137 #undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
 138
 139 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 140
 141 #define CONFIG_SYS_ATA_BASE_ADDR       CONFIG_SYS_PCMCIA_MEM_ADDR
 142
 143 /* Offset for data I/O                  */
 144 #define CONFIG_SYS_ATA_DATA_OFFSET     8
 145
 146 /* Offset for normal register accesses  */
 147 #define CONFIG_SYS_ATA_REG_OFFSET      0
 148
 149 /* Offset for alternate registers       */
 150 #define CONFIG_SYS_ATA_ALT_OFFSET      0x0100
 151
 152 #endif
 153 /*-----------------------------------------------------------------------
 154  * Cache Configuration
 155  */
 156 #define CONFIG_SYS_DCACHE_SIZE          16384
 157 #define CONFIG_SYS_ICACHE_SIZE          16384
 158 #define CONFIG_SYS_CACHELINE_SIZE       32
 159
 160
 161 /*
 162  * BOOTP options
 163  */
 164 #define CONFIG_BOOTP_BOOTFILESIZE
 165 #define CONFIG_BOOTP_BOOTPATH
 166 #define CONFIG_BOOTP_GATEWAY
 167 #define CONFIG_BOOTP_HOSTNAME
 168
 169
 170 /*
 171  * Command line configuration.
 172  */
 173 #include <config_cmd_default.h>
 174
 175 #define CONFIG_CMD_DHCP
 176 #define CONFIG_CMD_ELF
 177 #define CONFIG_CMD_MII
 178 #define CONFIG_CMD_PING
 179
 180 #undef CONFIG_CMD_SAVEENV
 181 #undef CONFIG_CMD_FAT
 182 #undef CONFIG_CMD_FLASH
 183 #undef CONFIG_CMD_FPGA
 184 #undef CONFIG_CMD_IDE
 185 #undef CONFIG_CMD_LOADS
 186 #undef CONFIG_CMD_RUN
 187 #undef CONFIG_CMD_LOADB
 188 #undef CONFIG_CMD_ELF
 189 #undef CONFIG_CMD_BDI
 190 #undef CONFIG_CMD_BEDBUG
 191
 192 #endif  /* __CONFIG_H */