include/configs/pcm030.h

   1 /*
   2  * (C) Copyright 2003-2005
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * (C) Copyright 2006
   6  * Eric Schumann, Phytec Messatechnik GmbH
   7  *
   8  * (C) Copyright 2009
   9  * Jon Smirl <jonsmirl@gmail.com>
  10  *
  11  * SPDX-License-Identifier:     GPL-2.0+
  12  */
  13
  14 #ifndef __CONFIG_H
  15 #define __CONFIG_H
  16
  17 #define CONFIG_BOARDINFO         "phyCORE-MPC5200B-tiny"
  18
  19 /*-----------------------------------------------------------------------------
  20 High Level Configuration Options
  21 (easy to change)
  22 -----------------------------------------------------------------------------*/
  23 #define CONFIG_MPC5xxx          1       /* This is an MPC5xxx CPU */
  24 #define CONFIG_MPC5200          1       /* (more precisely an MPC5200 CPU) */
  25 #define CONFIG_MPC5200_DDR      1       /* (with DDR-SDRAM) */
  26 #define CONFIG_PHYCORE_MPC5200B_TINY 1  /* phyCORE-MPC5200B -> */
  27                                         /* FEC configuration and IDE */
  28
  29 /*
  30  * Valid values for CONFIG_SYS_TEXT_BASE are:
  31  * 0xFFF00000   boot high (standard configuration)
  32  * 0xFF000000   boot low
  33  * 0x00100000   boot from RAM (for testing only)
  34  */
  35 #ifndef CONFIG_SYS_TEXT_BASE
  36 #define CONFIG_SYS_TEXT_BASE    0xFFF00000
  37 #endif
  38
  39 #define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */
  40
  41 /*-----------------------------------------------------------------------------
  42 Serial console configuration
  43 -----------------------------------------------------------------------------*/
  44 #define CONFIG_PSC_CONSOLE      3       /* console is on PSC3 -> */
  45                                         /*define gps port conf. */
  46                                         /* register later on to */
  47                                         /*enable UART function! */
  48 #define CONFIG_BAUDRATE         115200  /* ... at 115200 bps */
  49 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
  50
  51 /*
  52  * Command line configuration.
  53  */
  54 #include <config_cmd_default.h>
  55
  56 #define CONFIG_CMD_DATE
  57 #define CONFIG_CMD_DHCP
  58 #define CONFIG_CMD_EEPROM
  59 #define CONFIG_CMD_I2C
  60 #define CONFIG_CMD_JFFS2
  61 #define CONFIG_CMD_MII
  62 #define CONFIG_CMD_NFS
  63 #define CONFIG_CMD_PCI
  64
  65 #define CONFIG_TIMESTAMP        1       /* Print image info with timestamp */
  66
  67 #if (CONFIG_SYS_TEXT_BASE == 0xFF000000)        /* Boot low */
  68 #define CONFIG_SYS_LOWBOOT 1
  69 #endif
  70 /* RAMBOOT will be defined automatically in memory section */
  71
  72 #define CONFIG_JFFS2_CMDLINE
  73 #define MTDIDS_DEFAULT          "nor0=physmap-flash.0"
  74 #define MTDPARTS_DEFAULT        "mtdparts=physmap-flash.0:256k(ubootl)," \
  75         "1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)"
  76
  77 /*-----------------------------------------------------------------------------
  78 Autobooting
  79 -----------------------------------------------------------------------------*/
  80 #define CONFIG_BOOTDELAY        3       /* autoboot after 3 seconds */
  81 #define CONFIG_ZERO_BOOTDELAY_CHECK     /* allow stopping of boot process */
  82                                         /* even with bootdelay=0 */
  83 #undef  CONFIG_BOOTARGS
  84
  85
  86 #define CONFIG_PREBOOT  "echo;" \
  87         "echo Type \"run bootcmd_net\" to load Kernel over TFTP and to "\
  88                 "mount root filesystem over NFS;" \
  89         "echo"
  90
  91 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  92         "netdev=eth0\0"                                                 \
  93         "uimage=uImage-pcm030\0"                                        \
  94         "oftree=oftree-pcm030.dtb\0"                                    \
  95         "jffs2=root-pcm030.jffs2\0"                                     \
  96         "uboot=u-boot-pcm030.bin\0"                                     \
  97         "bargs_base=setenv bootargs console=ttyPSC0,$(baudrate)"        \
  98                 " $(mtdparts) rw\0"                                     \
  99         "bargs_flash=setenv bootargs $(bootargs) root=/dev/mtdblock2"   \
 100                 " rootfstype=jffs2\0"                                   \
 101         "bargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs"           \
 102                 " ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)::"   \
 103                 "$(netdev):off nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \
 104         "bcmd_net=run bargs_base bargs_nfs; tftpboot 0x500000 $(uimage);" \
 105                 " tftp 0x400000 $(oftree); bootm 0x500000 - 0x400000\0" \
 106         "bcmd_flash=run bargs_base bargs_flash; bootm 0xff040000 - "    \
 107                 "0xfff40000\0"                                          \
 108                 " cp.b 0x400000 0xff040000 $(filesize)\0"               \
 109         "prg_jffs2=tftp 0x400000 $(jffs2); erase 0xff200000 0xffefffff; " \
 110                 "cp.b 0x400000 0xff200000 $(filesize)\0"                \
 111         "prg_oftree=tftp 0x400000 $(oftree); erase 0xfff40000 0xfff5ffff;" \
 112                 " cp.b 0x400000 0xfff40000 $(filesize)\0"               \
 113         "update=tftpboot 0x400000 $(uboot);erase 0xFFF00000 0xfff3ffff;" \
 114                 " cp.b 0x400000 0xFFF00000 $(filesize)\0"               \
 115         "unlock=yes\0"                                                  \
 116         ""
 117
 118 #define CONFIG_BOOTCOMMAND              "run bcmd_flash"
 119
 120 /*--------------------------------------------------------------------------
 121 IPB Bus clocking configuration.
 122  ---------------------------------------------------------------------------*/
 123 #define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
 124
 125 /*-------------------------------------------------------------------------
 126  * PCI Mapping:
 127  * 0x40000000 - 0x4fffffff - PCI Memory
 128  * 0x50000000 - 0x50ffffff - PCI IO Space
 129  * -----------------------------------------------------------------------*/
 130 #define CONFIG_PCI                      1
 131 #define CONFIG_PCI_PNP                  1
 132 #define CONFIG_PCI_SCAN_SHOW            1
 133 #define CONFIG_PCI_MEM_BUS              0x40000000
 134 #define CONFIG_PCI_MEM_PHYS             CONFIG_PCI_MEM_BUS
 135 #define CONFIG_PCI_MEM_SIZE             0x10000000
 136 #define CONFIG_PCI_IO_BUS               0x50000000
 137 #define CONFIG_PCI_IO_PHYS              CONFIG_PCI_IO_BUS
 138 #define CONFIG_PCI_IO_SIZE              0x01000000
 139 #define CONFIG_SYS_XLB_PIPELINING       1
 140
 141 /*---------------------------------------------------------------------------
 142  I2C configuration
 143 ---------------------------------------------------------------------------*/
 144 #define CONFIG_HARD_I2C 1 /* I2C with hardware support */
 145 #define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */
 146 #define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
 147 #define CONFIG_SYS_I2C_SLAVE 0x7F
 148
 149 /*---------------------------------------------------------------------------
 150  EEPROM CAT24WC32 configuration
 151 ---------------------------------------------------------------------------*/
 152 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x52    /* 1010100x */
 153 #define CONFIG_SYS_I2C_FACT_ADDR        0x52    /* EEPROM CAT24WC32 */
 154 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2       /* Bytes of address */
 155 #define CONFIG_SYS_EEPROM_SIZE          2048
 156 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 157 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15
 158
 159 /*---------------------------------------------------------------------------
 160 RTC configuration
 161 ---------------------------------------------------------------------------*/
 162 #define RTC
 163 #define CONFIG_RTC_PCF8563              1
 164 #define CONFIG_SYS_I2C_RTC_ADDR         0x51
 165
 166 /*---------------------------------------------------------------------------
 167  Flash configuration
 168 ---------------------------------------------------------------------------*/
 169
 170 #define CONFIG_SYS_FLASH_BASE           0xff000000
 171 #define CONFIG_SYS_FLASH_SIZE           0x01000000
 172 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
 173
 174 #define CONFIG_SYS_FLASH_CFI            1       /* Flash is CFI conformant */
 175 #define CONFIG_FLASH_CFI_DRIVER 1       /* Use the common driver */
 176 #define CONFIG_SYS_FLASH_EMPTY_INFO
 177 #define CONFIG_SYS_MAX_FLASH_SECT 260 /* max num of sects on one chip */
 178 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */
 179                                                 /* (= chip selects) */
 180 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 181
 182 /*
 183  * Use also hardware protection. This seems required, as the BDI uses
 184  * hardware protection. Without this, U-Boot can't work with this sectors,
 185  * as its protection is software only by default
 186  */
 187 #define CONFIG_SYS_FLASH_PROTECTION     1
 188
 189 /*---------------------------------------------------------------------------
 190  Environment settings
 191 ---------------------------------------------------------------------------*/
 192
 193 /* pcm030 ships with environment is EEPROM by default */
 194 #define CONFIG_ENV_IS_IN_EEPROM 1
 195 #define CONFIG_ENV_OFFSET       0x00    /* environment starts at the */
 196                                         /*beginning of the EEPROM */
 197 #define CONFIG_ENV_SIZE         CONFIG_SYS_EEPROM_SIZE
 198
 199 #define CONFIG_ENV_OVERWRITE    1
 200
 201 /*-----------------------------------------------------------------------------
 202   Memory map
 203 -----------------------------------------------------------------------------*/
 204 #define CONFIG_SYS_MBAR 0xF0000000      /* MBAR has to be switched by other */
 205                                         /* bootloader or debugger config */
 206 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 207 #define CONFIG_SYS_DEFAULT_MBAR         0x80000000
 208 /* Use SRAM until RAM will be available */
 209 #define CONFIG_SYS_INIT_RAM_ADDR        MPC5XXX_SRAM
 210 #define CONFIG_SYS_INIT_RAM_SIZE        MPC5XXX_SRAM_SIZE       /* Size of used */
 211                                                                 /* area in DPRAM */
 212 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 213                                                 GENERATED_GBL_DATA_SIZE)
 214 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 215
 216 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 217 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
 218 #       define CONFIG_SYS_RAMBOOT               1
 219 #endif
 220
 221 #define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
 222 #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
 223 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
 224
 225 /*-----------------------------------------------------------------------------
 226  Ethernet configuration
 227 -----------------------------------------------------------------------------*/
 228 #define CONFIG_MPC5xxx_FEC              1
 229 #define CONFIG_MPC5xxx_FEC_MII100
 230 #define CONFIG_PHY_ADDR                 0x01
 231
 232 /*---------------------------------------------------------------------------
 233  GPIO configuration
 234  ---------------------------------------------------------------------------*/
 235
 236 /* GPIO port configuration
 237  *
 238  * Pin mapping:
 239  *
 240  * [29:31] = 01x
 241  * PSC1_0 -> AC97 SDATA out
 242  * PSC1_1 -> AC97 SDTA in
 243  * PSC1_2 -> AC97 SYNC out
 244  * PSC1_3 -> AC97 bitclock out
 245  * PSC1_4 -> AC97 reset out
 246  *
 247  * [25:27] = 001
 248  * PSC2_0 -> CAN 1 Tx out
 249  * PSC2_1 -> CAN 1 Rx in
 250  * PSC2_2 -> CAN 2 Tx out
 251  * PSC2_3 -> CAN 2 Rx in
 252  * PSC2_4 -> GPIO (claimed for ATA reset, active low)
 253  *
 254  *
 255  * [20:23] = 1100
 256  * PSC3_0 -> UART Tx out
 257  * PSC3_1 -> UART Rx in
 258  * PSC3_2 -> UART RTS (in/out FIXME)
 259  * PSC3_3 -> UART CTS (in/out FIXME)
 260  * PSC3_4 -> LocalPlus Bus CS6 \
 261  * PSC3_5 -> LocalPlus Bus CS7 / --> see [4] and [5]
 262  * PSC3_6 -> dedicated SPI MOSI out (master case)
 263  * PSC3_7 -> dedicated SPI MISO in (master case)
 264  * PSC3_8 -> dedicated SPI SS out (master case)
 265  * PSC3_9 -> dedicated SPI CLK out (master case)
 266  *
 267  * [18:19] = 01
 268  * USB_0 -> USB OE out
 269  * USB_1 -> USB Tx- out
 270  * USB_2 -> USB Tx+ out
 271  * USB_3 -> USB RxD (in/out FIXME)
 272  * USB_4 -> USB Rx+ in
 273  * USB_5 -> USB Rx- in
 274  * USB_6 -> USB PortPower out
 275  * USB_7 -> USB speed out
 276  * USB_8 -> USB suspend (in/out FIXME)
 277  * USB_9 -> USB overcurrent in
 278  *
 279  * [17] = 0
 280  * USB differential mode
 281  *
 282  * [16] = 0
 283  * PCI enabled
 284  *
 285  * [12:15] = 0101
 286  * ETH_0 -> ETH Txen
 287  * ETH_1 -> ETH TxD0
 288  * ETH_2 -> ETH TxD1
 289  * ETH_3 -> ETH TxD2
 290  * ETH_4 -> ETH TxD3
 291  * ETH_5 -> ETH Txerr
 292  * ETH_6 -> ETH MDC
 293  * ETH_7 -> ETH MDIO
 294  * ETH_8 -> ETH RxDv
 295  * ETH_9 -> ETH RxCLK
 296  * ETH_10 -> ETH Collision
 297  * ETH_11 -> ETH TxD
 298  * ETH_12 -> ETH RxD0
 299  * ETH_13 -> ETH RxD1
 300  * ETH_14 -> ETH RxD2
 301  * ETH_15 -> ETH RxD3
 302  * ETH_16 -> ETH Rxerr
 303  * ETH_17 -> ETH CRS
 304  *
 305  * [9:11] = 101
 306  * PSC6_0 -> UART RxD in
 307  * PSC6_1 -> UART CTS (in/out FIXME)
 308  * PSC6_2 -> UART TxD out
 309  * PSC6_3 -> UART RTS (in/out FIXME)
 310  *
 311  * [2:3/6:7] = 00/11
 312  * TMR_0 -> ATA_CS0 out
 313  * TMR_1 -> ATA_CS1 out
 314  * TMR_2 -> GPIO
 315  * TMR_3 -> GPIO
 316  * TMR_4 -> GPIO
 317  * TMR_5 -> GPIO
 318  * TMR_6 -> GPIO
 319  * TMR_7 -> GPIO
 320  * I2C_0 -> I2C 1 Clock out
 321  * I2C_1 -> I2C 1 IO in/out
 322  * I2C_2 -> I2C 2 Clock out
 323  * I2C_3 -> I2C 2 IO in/out
 324  *
 325  * [4] = 1
 326  * PSC3_5 is used as CS7
 327  *
 328  * [5] = 1
 329  * PSC3_4 is used as CS6
 330  *
 331  * [1] = 0
 332  * gpio_wkup_7 is GPIO
 333  *
 334  * [0] = 0
 335  * gpio_wkup_6 is GPIO
 336  *
 337  */
 338 #define CONFIG_SYS_GPS_PORT_CONFIG      0x0f551c12
 339
 340 /*-----------------------------------------------------------------------------
 341  Miscellaneous configurable options
 342 -------------------------------------------------------------------------------*/
 343 #define CONFIG_SYS_LONGHELP     /* undef to save memory */
 344 #define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */
 345
 346 #define CONFIG_CMDLINE_EDITING 1 /* add command line history */
 347
 348 #define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
 349 #if defined(CONFIG_CMD_KGDB)
 350 #define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
 351 #endif
 352
 353 #if defined(CONFIG_CMD_KGDB)
 354 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
 355 #else
 356 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
 357 #endif
 358 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 359                                                         /* Print Buffer Size */
 360 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
 361 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
 362
 363 #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
 364 #define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
 365
 366 #define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
 367 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
 368
 369 #define CONFIG_DISPLAY_BOARDINFO 1
 370
 371 /*-----------------------------------------------------------------------------
 372  Various low-level settings
 373 -----------------------------------------------------------------------------*/
 374 #define CONFIG_SYS_HID0_INIT            HID0_ICE | HID0_ICFI
 375 #define CONFIG_SYS_HID0_FINAL           HID0_ICE
 376
 377 /* no burst access on the LPB */
 378 #define CONFIG_SYS_CS_BURST             0x00000000
 379 /* one deadcycle for the 33MHz statemachine */
 380 #define CONFIG_SYS_CS_DEADCYCLE         0x33333331
 381 /* one additional waitstate for the 33MHz statemachine */
 382 #define CONFIG_SYS_BOOTCS_CFG           0x0001dd00
 383 #define CONFIG_SYS_BOOTCS_START         CONFIG_SYS_FLASH_BASE
 384 #define CONFIG_SYS_BOOTCS_SIZE          CONFIG_SYS_FLASH_SIZE
 385
 386 #define CONFIG_SYS_RESET_ADDRESS        0xff000000
 387
 388 /*-----------------------------------------------------------------------
 389  * USB stuff
 390  *-----------------------------------------------------------------------
 391  */
 392 #define CONFIG_USB_CLOCK                0x0001BBBB
 393 #define CONFIG_USB_CONFIG               0x00001000
 394
 395 /*---------------------------------------------------------------------------
 396  IDE/ATA stuff Supports IDE harddisk
 397 ----------------------------------------------------------------------------*/
 398
 399 #undef  CONFIG_IDE_8xx_PCCARD   /* Use IDE with PC Card Adapter */
 400 #undef  CONFIG_IDE_8xx_DIRECT   /* Direct IDE not supported */
 401 #undef  CONFIG_IDE_LED          /* LED for ide not supported */
 402 #define CONFIG_SYS_ATA_CS_ON_TIMER01
 403 #define CONFIG_IDE_RESET 1      /* reset for ide supported */
 404 #define CONFIG_IDE_PREINIT
 405 #define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
 406 #define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
 407 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 408 #define CONFIG_SYS_ATA_BASE_ADDR        MPC5XXX_ATA
 409 /* Offset for data I/O                  */
 410 #define CONFIG_SYS_ATA_DATA_OFFSET      (0x0060)
 411 /* Offset for normal register accesses  */
 412 #define CONFIG_SYS_ATA_REG_OFFSET       (CONFIG_SYS_ATA_DATA_OFFSET)
 413 /* Offset for alternate registers       */
 414 #define CONFIG_SYS_ATA_ALT_OFFSET       (0x005C)
 415 /* Interval between registers */
 416 #define CONFIG_SYS_ATA_STRIDE           4
 417 #define CONFIG_ATAPI                    1
 418
 419 /* we enable IDE and FAT support, so we also need partition support */
 420 #define CONFIG_DOS_PARTITION 1
 421
 422 /* USB */
 423 #define CONFIG_USB_OHCI
 424 #define CONFIG_USB_STORAGE
 425
 426 /* pass open firmware flat tree */
 427 #define CONFIG_OF_LIBFDT                1
 428 #define CONFIG_OF_BOARD_SETUP           1
 429
 430 #define OF_CPU                          "PowerPC,5200@0"
 431 #define OF_TBCLK                        CONFIG_SYS_MPC5XXX_CLKIN
 432 #define OF_SOC                          "soc5200@f0000000"
 433 #define OF_STDOUT_PATH                  "/soc5200@f0000000/serial@2400"
 434
 435 #endif /* __CONFIG_H */