include/configs/pcm058.h

   1 /*
   2  * Copyright (C) Stefano Babic <sbabic@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7
   8 #ifndef __PCM058_CONFIG_H
   9 #define __PCM058_CONFIG_H
  10
  11 #include <config_distro_defaults.h>
  12
  13 #ifdef CONFIG_SPL
  14 #define CONFIG_SPL_YMODEM_SUPPORT
  15 #define CONFIG_SPL_MMC_SUPPORT
  16 #define CONFIG_SPL_SPI_SUPPORT
  17 #define CONFIG_SPL_SPI_FLASH_SUPPORT
  18 #define CONFIG_SPL_SPI_LOAD
  19 #define CONFIG_SYS_SPI_U_BOOT_OFFS      (64 * 1024)
  20 #include "imx6_spl.h"
  21 #endif
  22
  23 #include "mx6_common.h"
  24
  25 /* Thermal */
  26 #define CONFIG_IMX_THERMAL
  27
  28 /* Serial */
  29 #define CONFIG_MXC_UART
  30 #define CONFIG_MXC_UART_BASE           UART2_BASE
  31 #define CONFIG_CONSOLE_DEV              "ttymxc1"
  32
  33 #define PHYS_SDRAM_SIZE         (1u * 1024 * 1024 * 1024)
  34
  35 /* Early setup */
  36 #define CONFIG_BOARD_EARLY_INIT_F
  37 #define CONFIG_BOARD_LATE_INIT
  38 #define CONFIG_DISPLAY_BOARDINFO_LATE
  39
  40
  41 /* Size of malloc() pool */
  42 #define CONFIG_SYS_MALLOC_LEN           (8 * SZ_1M)
  43
  44 /* Ethernet */
  45 #define CONFIG_FEC_MXC
  46 #define CONFIG_MII
  47 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  48 #define CONFIG_FEC_XCV_TYPE             RGMII
  49 #define CONFIG_ETHPRIME                 "FEC"
  50 #define CONFIG_FEC_MXC_PHYADDR          3
  51
  52 #define CONFIG_PHYLIB
  53 #define CONFIG_PHY_MICREL
  54 #define CONFIG_PHY_KSZ9031
  55
  56 /* SPI Flash */
  57 #define CONFIG_MXC_SPI
  58 #define CONFIG_SF_DEFAULT_BUS           0
  59 #define CONFIG_SF_DEFAULT_CS            0
  60 #define CONFIG_SF_DEFAULT_SPEED         20000000
  61 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  62
  63 /* I2C Configs */
  64 #define CONFIG_SYS_I2C
  65 #define CONFIG_SYS_I2C_MXC
  66 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 2 */
  67 #define CONFIG_SYS_I2C_SPEED              100000
  68
  69 #ifndef CONFIG_SPL_BUILD
  70 #define CONFIG_CMD_NAND
  71 /* Enable NAND support */
  72 #define CONFIG_CMD_NAND_TRIMFFS
  73 #define CONFIG_NAND_MXS
  74 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  75 #define CONFIG_SYS_NAND_BASE            0x40000000
  76 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  77 #define CONFIG_SYS_NAND_ONFI_DETECTION
  78 #endif
  79
  80 /* DMA stuff, needed for GPMI/MXS NAND support */
  81 #define CONFIG_APBH_DMA
  82 #define CONFIG_APBH_DMA_BURST
  83 #define CONFIG_APBH_DMA_BURST8
  84
  85 /* Filesystem support */
  86 #define CONFIG_LZO
  87 #define CONFIG_CMD_UBIFS
  88 #define CONFIG_CMD_MTDPARTS
  89 #define CONFIG_MTD_PARTITIONS
  90 #define CONFIG_MTD_DEVICE
  91 #define MTDIDS_DEFAULT    "nand0=nand"
  92 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
  93
  94 /* Various command support */
  95 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
  96 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
  97 #define CONFIG_CMD_GSC
  98 #define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
  99 #define CONFIG_CMD_UBI
 100 #define CONFIG_RBTREE
 101
 102 /* Physical Memory Map */
 103 #define CONFIG_NR_DRAM_BANKS           1
 104 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 105
 106 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 107 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 108 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 109
 110 #define CONFIG_SYS_INIT_SP_OFFSET \
 111         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 112 #define CONFIG_SYS_INIT_SP_ADDR \
 113         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 114
 115 /* MMC Configs */
 116 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 117 #define CONFIG_SYS_FSL_USDHC_NUM        1
 118
 119 /* Environment organization */
 120 #define CONFIG_ENV_IS_IN_SPI_FLASH
 121 #define CONFIG_ENV_SIZE                (16 * 1024)
 122 #define CONFIG_ENV_OFFSET               (1024 * SZ_1K)
 123 #define CONFIG_ENV_SECT_SIZE            (64 * SZ_1K)
 124 #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 125 #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 126 #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 127 #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 128 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 129 #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + \
 130                                                 CONFIG_ENV_SECT_SIZE)
 131 #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 132
 133 #ifdef CONFIG_ENV_IS_IN_NAND
 134 #define CONFIG_ENV_OFFSET              (0x1E0000)
 135 #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 136 #endif
 137
 138 #endif