include/configs/pcm058.h

   1 /*
   2  * Copyright (C) Stefano Babic <sbabic@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7
   8 #ifndef __PCM058_CONFIG_H
   9 #define __PCM058_CONFIG_H
  10
  11 #include <config_distro_defaults.h>
  12
  13 #ifdef CONFIG_SPL
  14 #define CONFIG_SPL_SPI_LOAD
  15 #define CONFIG_SYS_SPI_U_BOOT_OFFS      (64 * 1024)
  16 #include "imx6_spl.h"
  17 #endif
  18
  19 #include "mx6_common.h"
  20
  21 /* Thermal */
  22 #define CONFIG_IMX_THERMAL
  23
  24 /* Serial */
  25 #define CONFIG_MXC_UART
  26 #define CONFIG_MXC_UART_BASE           UART2_BASE
  27 #define CONFIG_CONSOLE_DEV              "ttymxc1"
  28
  29 #define PHYS_SDRAM_SIZE         (1u * 1024 * 1024 * 1024)
  30
  31 /* Early setup */
  32 #define CONFIG_BOARD_EARLY_INIT_F
  33 #define CONFIG_BOARD_LATE_INIT
  34 #define CONFIG_DISPLAY_BOARDINFO_LATE
  35
  36
  37 /* Size of malloc() pool */
  38 #define CONFIG_SYS_MALLOC_LEN           (8 * SZ_1M)
  39
  40 /* Ethernet */
  41 #define CONFIG_FEC_MXC
  42 #define CONFIG_MII
  43 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  44 #define CONFIG_FEC_XCV_TYPE             RGMII
  45 #define CONFIG_ETHPRIME                 "FEC"
  46 #define CONFIG_FEC_MXC_PHYADDR          3
  47
  48 #define CONFIG_PHYLIB
  49 #define CONFIG_PHY_MICREL
  50 #define CONFIG_PHY_KSZ9031
  51
  52 /* SPI Flash */
  53 #define CONFIG_MXC_SPI
  54 #define CONFIG_SF_DEFAULT_BUS           0
  55 #define CONFIG_SF_DEFAULT_CS            0
  56 #define CONFIG_SF_DEFAULT_SPEED         20000000
  57 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
  58
  59 /* I2C Configs */
  60 #define CONFIG_SYS_I2C
  61 #define CONFIG_SYS_I2C_MXC
  62 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 2 */
  63 #define CONFIG_SYS_I2C_SPEED              100000
  64
  65 #ifndef CONFIG_SPL_BUILD
  66 #define CONFIG_CMD_NAND
  67 /* Enable NAND support */
  68 #define CONFIG_CMD_NAND_TRIMFFS
  69 #define CONFIG_NAND_MXS
  70 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  71 #define CONFIG_SYS_NAND_BASE            0x40000000
  72 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  73 #define CONFIG_SYS_NAND_ONFI_DETECTION
  74 #endif
  75
  76 /* DMA stuff, needed for GPMI/MXS NAND support */
  77 #define CONFIG_APBH_DMA
  78 #define CONFIG_APBH_DMA_BURST
  79 #define CONFIG_APBH_DMA_BURST8
  80
  81 /* Filesystem support */
  82 #define CONFIG_LZO
  83 #define CONFIG_CMD_UBIFS
  84 #define CONFIG_CMD_MTDPARTS
  85 #define CONFIG_MTD_PARTITIONS
  86 #define CONFIG_MTD_DEVICE
  87 #define MTDIDS_DEFAULT    "nand0=nand"
  88 #define MTDPARTS_DEFAULT  "mtdparts=nand:16m(uboot),1m(env),-(rootfs)"
  89
  90 /* Various command support */
  91 #define CONFIG_CMD_BMODE         /* set eFUSE shadow for a boot dev and reset */
  92 #define CONFIG_CMD_HDMIDETECT    /* detect HDMI output device */
  93 #define CONFIG_CMD_GSC
  94 #define CONFIG_CMD_EECONFIG      /* Gateworks EEPROM config cmd */
  95 #define CONFIG_CMD_UBI
  96 #define CONFIG_RBTREE
  97
  98 /* Physical Memory Map */
  99 #define CONFIG_NR_DRAM_BANKS           1
 100 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
 101
 102 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
 103 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
 104 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
 105
 106 #define CONFIG_SYS_INIT_SP_OFFSET \
 107         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 108 #define CONFIG_SYS_INIT_SP_ADDR \
 109         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 110
 111 /* MMC Configs */
 112 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 113 #define CONFIG_SYS_FSL_USDHC_NUM        1
 114
 115 /* Environment organization */
 116 #define CONFIG_ENV_IS_IN_SPI_FLASH
 117 #define CONFIG_ENV_SIZE                (16 * 1024)
 118 #define CONFIG_ENV_OFFSET               (1024 * SZ_1K)
 119 #define CONFIG_ENV_SECT_SIZE            (64 * SZ_1K)
 120 #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
 121 #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
 122 #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
 123 #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 124 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 125 #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + \
 126                                                 CONFIG_ENV_SECT_SIZE)
 127 #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
 128
 129 #ifdef CONFIG_ENV_IS_IN_NAND
 130 #define CONFIG_ENV_OFFSET              (0x1E0000)
 131 #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
 132 #endif
 133
 134 #endif